The first was the best one. Dude narrating it reminded me of Bob Ross. I was ready to paint some happy trees.
@kelleyhawk6595
Жыл бұрын
The first one was awesome! The third one, 😠😢 I wish people would stop tearing apart and destroying vintage or antique furniture instead of restoring it to its former glory.
@gailwilliams5278
Жыл бұрын
I agree! The results were pretty hideous too!
@thjonez
Жыл бұрын
that one hurt 😱
@flakathy890
Жыл бұрын
Yes! For the age, that beautiful dresser was in wonderful condition. I can't believe she was going to throw it out. Nor can I believe she butchered it.
@luciabastonecalandriello3506
Жыл бұрын
😢 i totally agree!
@consciousobjector2507
Жыл бұрын
They are a disposable generation. They don't care about history any longer.
@immanutt4442
Жыл бұрын
clear enunciation - concise details - narrator is on point ...
@bealynn2258
Жыл бұрын
AAAAMMMMMAAAZINNG!!😀💕🎉🎉👍👍 I really like ALL of these, except the orange fabric cooler.....😶
@teribodle1142
Жыл бұрын
The first one was pretty good. It's a good thing the cooler can be removed to empty and clean as needed. The bottle cap holder needs a slide out bottom for emptying the caps into a bag. Or you could put a bag in there in the first place but clip it in place so it doesn't fall in. Otherwise it was an awesome idea.
@Mimito5
Жыл бұрын
That was what I wondered. I guess it takes a woman to think about how practical something is. 😂
@GoodlyEarth
Жыл бұрын
@@Mimito5 Hey now....😉
@mist4926
Жыл бұрын
Was thinking same thing about slide out idea
@magpie92766
Жыл бұрын
@@GoodlyEarth 😆
@JonAhlquist
Жыл бұрын
It would be easiest if the cap catcher is wide enough and shallow enough so that you can reach in with your hand and pull out the caps. Otherwise, a magnet can pull out the bottle caps. (I haven't drunk from a bottle with a cap in years.) Other things: Even cedar fencing needs to be treated to avoid decay. He used Titebond Premium Wood Glue (1:04), which is waterproof, but not all wood glues are suitable for projects that get wet, so choose your glue carefully. Personally, I don't have space for a permanent cooler stand that I would rarely use, but that's just me.
@BeeWOWdbyAprilLee
Жыл бұрын
That first idea was really cool. What a great idea to have something for a party. And people don't have to bed down to get a drink and I love how you put that area to catch the bottle caps.
@theweatherisaokay4964
Жыл бұрын
It's cheaper to use the first video idea with the second video item.
@kmccoy1601
Жыл бұрын
Cool ideas 💡! I really liked the first and last one! The middle one needed to be better thought out. Like adding a cushion or something. Blessings and Peace ❤️✝️
@sharingtheherring12
Жыл бұрын
I'm flipping out trying to count the number of self-designated geniuses KZitem seems to produce.
@bobwallace9814
Жыл бұрын
I've got a better use if you have a backyard. I've been using various coolers just like that as a fireproof, burglarproof safe for valuables you would store in an expensive safe. I bury them in a nice garden setting with the top at ground level. Put a paving/flagstone type over the spot. Been doing this for decades.
@MinstrelOnTheRun
Жыл бұрын
The Bob Ross of DIY. Great vid!
@misswildlife7905
Жыл бұрын
Loved the dresser hack the best!!!!!!
@abbynormal4740
Жыл бұрын
3 things about making the first cooler. It looks great, but be sure to use *waterproof* wood glue and apply an all- weather sealer to the wood. Finally, how are you supposed to remove the bottle caps from that narrow cap catcher? 🤔 I'd probably make a removable receptacle to hang below the bottle opener or just flatten one side of a small tin bucket to hang flush against the cooler case under the opener.😁
@charliem.7492
Жыл бұрын
I LOVE the first one. His voice is always so soothing.
@cheryl2651
Жыл бұрын
Totally agree! Wish I knew who he was so that I could look up if he has his own channel. I think it might be GoodlyEarth
@tanyab9279
Жыл бұрын
Was about to ask if anyone knows who this DIYer is and if he had his own channel?
@lizabethduran4417
Жыл бұрын
The first one gave me so much life. Cannot WAIT to try it myself.. or get my son to 😍 But that last one straight deleted me. & in such a horrific way too 😢 Edited: Thank you for the coaster ride. Stay Blessed
@hollypierce3076
Жыл бұрын
The first DIY was pretty good! Especially if your house is the spot where everyone goes to have barbeques! The last dresser into a bar revamp was really nice too!❤
@frankenstein3163
7 ай бұрын
Only problem was putting the hoes all the way thru the lid as that would melt the ice faster.
@anniewardlow9297
Жыл бұрын
Thank you so much for this video! Three very cute & fresh ideas that I don't think that I've seen before. I have to say that the "Christmas in March" video a few days ago had me wondering why I watched this channel? Now I remember. It's because of the good craft ideas. So, thanks again for the content & to the crafters for their ideas & great work! 👍
@leahrowe847
Жыл бұрын
I'm lov'n you guys adding tutorials to these videos... thanks for listening to us; it just makes 4 awesome content!
@occamsrazor7939
Жыл бұрын
I really enjoyed this video.
@UKS140
Жыл бұрын
Loved the first one!
@EvanghelosValassidis
Жыл бұрын
Love the first cooler “Hack” really beautiful and useful I did not like the other two.
@59prettywoman1
Жыл бұрын
Nice. So to get the water out you have to lift the whole cooler out to dump it. Or did you make an opening for the coolers drain plug but didn't show it in the video?
@tanyab9279
Жыл бұрын
Love the cooler first cooler video. I agree with others that the same type of cooler used in the first video would work as well for the video of the ottoman & provide much support, but what an awesome way to reuse a styrofoam cooler that probably be taking up space in a landfill somewhere. Saw some of the comments & wanted to mention that I have watched the DIYer in the first video on several other projects & he is very thorough so I am sure he left an opening for the drain spout & also a way to remove bottle caps from container easily. Only so much time can be allotted to DIY projects shown on HT, so I’m sure he had to keep most info specific to the cooler housing build info. Wanted to ask if anyone happens to know his name or if he has his own channel I could look up? Really like his attention to detail on instructions. TIA
@ShiftyGearz
Жыл бұрын
Love this cooler stand. Turned out great
@magpie92766
Жыл бұрын
The ottoman cooler needed the excess fabric cut away from where the lid fits. You could adhere tape trim to cover the edges & not interfer w the lid closing. The suggestion of adding some foam or pillow on top is a good one. The only problem I see w using this for an actual cooler vs a storage ottoman is pouring the water out & getting the fabric wet & nasty.
@tgonza98
Жыл бұрын
All great ideas! I especially love the first one.
@donnadalessio3853
Жыл бұрын
That Man is the Bob Ross of wood working💖
@vbryxo
Жыл бұрын
These are all so creative!!!
@silvercat5309
Жыл бұрын
I just love the first guys voice and presentation,and yes that cooler was cool👍🏽
@fernandovargas5453
Жыл бұрын
For some reason the way you’re talking reminds me of Bob Ross😂 after all you are creating art.
@nitamckeethen6986
Жыл бұрын
Wow! That is genius! So cool.
@joannbaley188
Жыл бұрын
Cool ideas👍🏼
@consciousobjector2507
Жыл бұрын
The last person should be arrested for destruction of property with horrendous results.
@theweatherisaokay4964
Жыл бұрын
Love the first idea a lot but using the second video ice box. Great idea.
@tikajoubert2473
Жыл бұрын
Best idea I’ve seen yet!!! Great job!!!! 👏🏽👏🏽👏🏽😃😊👍🏽
@irmahardnett
Жыл бұрын
Love the coolers hacks💚👍💚
@josephd27
Жыл бұрын
The first cooler idea was cool
@kirknra863
Жыл бұрын
You can beef up an old cooler by drilling holes around the top rim and then spray in some expanding foam. They don’t use a lot of foam from the factory.
@dorothydanridge
Жыл бұрын
I like the way he uses his Mr. Rogers voice. So calm and soft.
@GoodlyEarth
Жыл бұрын
Happy little cooler...😂
@jamesa.rodriguez8598
Жыл бұрын
It seems the first one would be hard to remove when even partially filled with melted water. The cost for components another -factor
@559killuminati
Жыл бұрын
What is melted water like?
@jamesa.rodriguez8598
Жыл бұрын
@@559killuminati ice
@thefarmhousewoman
Жыл бұрын
I really liked this. I’m going to do this!!!❤
@randallfawc7501
Жыл бұрын
That is cool as heck!
@ronnierice5573
Жыл бұрын
That was well done .
@brianh6272
Жыл бұрын
What about the drain ????
@Mimito5
Жыл бұрын
The cooler can easily be removed to drain and clean.
@brianh6272
Жыл бұрын
@@Mimito5 yeah I guess since the handles cant go down after you use em to slide it in there
@lorieburtt592
Жыл бұрын
@@brianh6272 But the handles are shown as being down after it’s in the box. If they remained up, to be able to use them to remove and empty the cooler, the new top would not be able to close. It’s cute, but it’s not practical. Also, the styrofoam cooler is going to be demolished the first time someone plops some heavy feet on it, or if someone thinks that it’s an actual piece of furniture and sits on it! It would have been better to construct a wood box to encase an inexpensive styrofoam cooler, making it sturdier.
@richardefriend
Жыл бұрын
Great ideas if the value of your time is less than $0.01 per hour.
@WarrenFloyd-xr2js
3 ай бұрын
Did you notice that the cooler lid fits the base upside down? Makes a great serving tray,Subbed😎👍
@herbertvanrensburg6411
Жыл бұрын
I loved the first guys project, I have at least twelve cooler boxes at home with about three with broken hinges on the lids, guess what I am going to do?
@leodawn5913
Жыл бұрын
Great voice! Well done
@1erinjames
Жыл бұрын
Very creative!
@suezbell1
Жыл бұрын
Like the first one w/a couple of additions: The catch for the bottle lid should have a removable cup inside that can be lifted out and dumped. The finished cooler needs some wheels.
@robbievalen4364
Жыл бұрын
This freakin genius!!!!!!!
@shannonvanderhoof4810
Жыл бұрын
FABULOUS.
@user-mi2kz7of1l
4 ай бұрын
Phkn Amazing ma G !!!! Am havn fam over from c. amerika. And i will follow yo video to build one !!! Phkn amaxing ma G !! ✨👍
@beardedelephant3023
Жыл бұрын
First one was very dope
@jerrykeenan1848
Жыл бұрын
Thanks so much
@jackhill436
Жыл бұрын
Yeah these are pretty cool I built one a few years ago for our pool parties
@michaelfolse8140
Жыл бұрын
I like your Bob Ross narrating cool idea.
@thebastardgift
Жыл бұрын
Sooooooo Smart. ♥
@johnr5545
Жыл бұрын
Thanks nice job god bless
@smashcoastmusictv
Жыл бұрын
That beat tho!🎶🔥
@l.medina6251
Жыл бұрын
Useful projects & ideas. The middle project was a bit rough in execution. And I wonder about it's comfort. Even rigid foam can be rough on the heels & ankles after a bit. And orange?
@larryhenry719
Жыл бұрын
Awesome! how long were legs on cooler
@monkeybarmonkeyman
Жыл бұрын
I think I'd have used superstrong Velcro on the first one to secure the lid to the wood. I could then still use the cooler for mobile trips to local campgrounds. Nice otherwise.
@silverandblackentertainment
Жыл бұрын
It’s like a building Bob Ross! 😂 👌🏽
@ruleev6432
Жыл бұрын
Pretty cool
@davestevens4193
Жыл бұрын
Side shelves would be a nice addition
@uscitizen5656
Жыл бұрын
Your voice and cadence makes you sound like Mr. Rogers and the Painter Bob Ross! Pardon the pun but that's a Cool Idea!!
@pennsigns-ju6ub
Жыл бұрын
Idk about genius hack, I've been building wooden ice chest for like 15 years, but thanks for the compliment.
@martinortiz9827
16 күн бұрын
you could make a slide to remove the caps out the holder would be nice
@Mr.XRED1976
3 ай бұрын
LOL this hack is as old as the hills heh its been done and talked about around the campfire for years. But only new on social media👍👍👍
@drewdemien481
Жыл бұрын
Fill it with foam?
@ShiftyGearz
Жыл бұрын
Filling the insulating hollow areas with foam/anything has the opposite effect. The hollow area is designed to creat a chilled area around the cooler space so the ambient doesnt draw the chill out of the inside. When u fill that area it acts as a heated/warm blanket sucking the coolness out even faster. Depends on the outside temp i guess
@HellRaiserShook
Жыл бұрын
Is that so? I filled my lid with half a cup of salt and 2 thirds of water and freeze the lid before reattaching when needed and I use 3 x 2"dia pipes with caps 50/50 water with half a cup of salt and frozen to go in the bottom with some stainless mesh on top to make a false bottom
@lindalamb3394
Жыл бұрын
What kind of stapler is that?
@GSmith-ez5lr
Жыл бұрын
What a fantastic idea! Now where is that old cooler .
@joecoolcitizen1493
Жыл бұрын
Cool
@kbar1590
Жыл бұрын
Cool idea but maybe a hole for the drain access.
@garrydobson2626
Жыл бұрын
Seems a bit tight to get to the actual cooler handles
@carolroberts8930
Жыл бұрын
COOL!!!
@joeg9810
Жыл бұрын
Good job. One thought, make something to attach to the drain so you can drain out the water without having to remove the cooler.
@AlexanderRodriguez-ni4kt
Жыл бұрын
I’m flipping out over this genius cooler hack!
@joshuanorthern1863
Жыл бұрын
(Respectfully) The first guy sounds like the Bob Ross of carpentry. . RIP Bob Ross.
@lynnrobinson8885
Жыл бұрын
I think they should have used the foam cooler for the first project and the poly- container for a seat or stool. The poly body would be stronger to take the weight. Otherwise, good.
@lynnrobinson8885
Жыл бұрын
P.S. how do you clean the fabric covered on? It might be easier to elasticate the outer edge of the lid piece and the same for the bottom piece. They can just be pulled on and off quickly and be thrown in the laundry!
@kimberlyhonea4225
Жыл бұрын
First cooler cover was great, second one, not so much
@onetruesoldiervt3686
Жыл бұрын
The first one was cool only thing that would of been cool is some trap door beneath the bottle cap catcher to empty it when it got full
@dangerdoberman
Жыл бұрын
This was...pretty cool >;J
@Smith.JohnSmith
Жыл бұрын
Have fun draining the water from the cooler 😜
@RealStevenBanks
Жыл бұрын
Awesome
@pstreetgarage7304
Жыл бұрын
V cool !
@billjenkins5693
Жыл бұрын
Nice
@chadvarnell1889
Жыл бұрын
Add a little hinged flap where the cooler drain is on the 1st one if it has one so you can reduce the weight for removal 7/or make room for more ice...
@margaretenoha5394
Жыл бұрын
My man is like if Bob Ross and Bob Villa had a child….of coolers.
@robertlosasso4222
Жыл бұрын
How are you going to get those bottle caps out ?
@stugatz2664
Жыл бұрын
pro tip ---- when gluing the fabric to the cooler, Spray BOTH the fabric AND the cooler! wait until it tacks up, the stick them together,,, you won't need pins that way
@viviancovington7813
Жыл бұрын
Cool 😎
@locsadventures1121
Жыл бұрын
Always remember two at a time
@glennahuff8233
Жыл бұрын
I’m looking for some kind of sink to go into minivan. Fresh water on one side and other side grey water. Thank you
@michelel2117
Жыл бұрын
How do you pull out the cooler to wash or drain it?
@jakefriesenjake
Жыл бұрын
Now add regular table salt to the ice and watch your beers get so cold, they can freeze..... If you add too much salt! You're welcome
@denisehall4818
Ай бұрын
wow!
@hortod1
Жыл бұрын
Looks like the drain was blocked on the first one. That would be a problem
Пікірлер: 244