The percentage adjustments of pellet load and fume extraction is one more alternative to the varied system that these controller plates provide in their programming.
The system allows us to vary the percentage of pellet load and fume extraction by
the parameters Cpel and Casp
- CASP is the percentage change in smoke extraction.
- CPEL is the percentage change in pellet loading
HOW TO CHANGE CPEL AND CASP
- Press the - key and then the ON/OFF key repeatedly until UT04 appears on the display.
- Press the + key repeatedly until "c9" appears on the display.
Hold down the keys to scroll faster
- Press the ON key to enter the submenu:
- Press the ON/OFF key to select Cpel or Casp
- Press the - and + keys to change the value
The range of values that Cpel and Casp can assume is between -5 and +5.
Each point corresponds to a variation of ± 5% on the base value of each power.
(PR06 ÷ PR10 for pellet load and
PR18 ÷ PR22 for the exhaust fan).
The default values are:
Cpel = 0
Casp = 0
This simple but interesting option gives us quick control when making small adjustments without going into the specific modifications of each power.
WE CAN BE SURE THAT WE DO NOT MODIFY ANY PARAMETER
It is simply THAT EASY and many times it is the adjustment we need before touching any power settings.
One of the fundamental keys to finding out if we lack gas extraction, and leave behind that black glass.
However, if we notice an improvement in the energy efficiency of our system, it is very likely that the next step is to take the step and decide to modify the parameters of a particular power, either through a PELLETS Load Test or by noting a great difference in both the flame and an optimal combustion.
It is important not to exceed the values of increased extraction of gases, because in this way we would be wasting energy efficiency and letting escape large amounts of heat through the duct of evacuation of smoke.
Do not miss the following video the following week...
We will talk about combustion and how to visualize and modify the hours of operation of the stove.
If you like the information and videos with your simple subscription and alert in the notifications helps us a lot to continue creating quality content.
SUBSCRIBE: n9.cl/hsff
We hope to see you followed by the channel and I count on your comments to be in touch and generate great feedback for the whole community.
We believe in change, we are committed to the environment, we make biomass a way of life.
Translated with www.DeepL.com/Translator (free version)
Негізгі бет Ғылым және технология Percentage adjustments for pellet loading and cpel and casp fume extraction.
Пікірлер: 338