For more information you can download our technical guide : www.permaconpro.ca/files/en/Gu...
Or visit our website www.permaconpro.ca/
Pillars are built by placing Tandem units at 90° angles to create a square. Corners can then be completed by adding the appropriate end-textured veneer units. These veneers are attached using a corner connector as mentioned in the section on building a corner. It is recommanded to glue each module together to secure every course.
Two different types of pillars may be built.
The maximum above ground height of a pillar varies from 1200 mm to 1500 mm (4 to 5 ft.) and a minimum of 150 mm (6 in.) must be dug into the ground and buried.
Capping may be completed using the different Capita capping modules by Permacon (see the following table).
Негізгі бет Тәжірибелік нұсқаулар және стиль PERMACON - Lafitt Tandem Wall - Chapter 3 - Building Pillars
Пікірлер