I was thinking that my car doesn´t have a OBD port, thanks for show that!
@RossPerryProductions
2 жыл бұрын
No worries at all, glad the video helped :)
@baylessnow
11 ай бұрын
I have just bought a 2017 'facelift' 2008 and looked for the fusebox in the tiny glovebox with the BIG door!. I didn't see it hiding behind the birds nest wiring just sitting there in the hole, looking like a real amateur has rewired the car! Not what I expected. Now that I am thousands out of pocket and I'm discovering all the down sides to this car (via KZitem videos), and I'm wishing I'd kept my trusty (but sadly, rusty) 23 year old Toyota Yaris Verso!!! This car has less than zero storage space in comparison.
@RossPerryProductions
11 ай бұрын
Sorry to hear that, I personally am also not a fan of French cars, but that is from years of working on them. Hopefully it will still end up being a good car for you
@StaxxxInMyJeans
3 жыл бұрын
Thanks for sharing, BTW it's quite hard to reach fuses, don't know why they designed to put fuse box behind cable unit.
@RossPerryProductions
3 жыл бұрын
I know I noticed that when I was looking, maybe you could use some insulated tweezers to pull them? Ross
@robertbrown4006
9 ай бұрын
Exactly the same setup as a Citroen C3 air cross..... What job that was replacing the fuse on the front and back ciggy lighter after I accidentally plugged in a bad accessory and blew two fuses. Blimey ...that was a job. In the end it was easier just to remove the trim and glove box. 😲
@RossPerryProductions
9 ай бұрын
I bet, need smaller hands to get in there. Ross
@ff2346cookson
3 жыл бұрын
Thanks for that......very useful🤟🤟
@RossPerryProductions
3 жыл бұрын
No worries at all, thanks for watching.
@Jack-em1xe
3 жыл бұрын
Thanks for making the video. Is the 2008 definitely Odb2 compatible? Have you personally tried an odb2 scanner in the port to confirm compatibility?
@RossPerryProductions
3 жыл бұрын
Hi Jack, yes 100% I have used one.
@michaelpickering7199
Жыл бұрын
thank you so much this is so helpful ,what fuse should i use for a dashcam
@RossPerryProductions
Жыл бұрын
Hi there, no worries at all, please remember to give the thumbs up. I would come off the accessory or 12v outlet circuits.
@michaelpickering7199
Жыл бұрын
Yes but it looks so awkward getting to the fuse
@Frenchtechprofessor
3 жыл бұрын
I need to access fuse F29 Aircon compressor but seems to be out of reach. What is the best way. Does the glove compartment need to be removed ? Great video. thank you
@RossPerryProductions
3 жыл бұрын
Hi Jorge, Yes removing the Glove Box should make it a lot easier to get to. Thanks for watching. Ross
@feli___b
2 жыл бұрын
Hi there, I need to reach the windscreen washer pump fuse F27, it's also out of reach... Did you manage to remove the glove box, how did you manage to reach the F29 fuse?
@retroshropshire41
3 жыл бұрын
Ive got a Peugeot 208 1.2 vti petrol , 63 plate . Can you tell me where abouts is the fuel pump fuse is and what one it is i need to pull out , to do a compression test . Ive looked everywhere on google and doesnt say . Just shows me fuses like your diagram .
@RossPerryProductions
3 жыл бұрын
Hi Retro, unfortunately I have not worked on one to comment, Sorry. Ross
@angelzim6555
2 жыл бұрын
I just bought this car and it’s gonna be eating ready it’s been three days so it’s the 2013 version of the same Peugeot 2008 and it is overheating and telling me to stop but I put coolant and everything is there somewhere else I can put the water in the radiator that I’m missing??
@RossPerryProductions
2 жыл бұрын
Hi Angel, I cant remember on this car but there should be two positions to put coolant in, at the top of the radiator, and the expansion reservoir. Is it overheating during traffic or when driving? it could be the thermostat not turning on the radiator fans. Regards Ross
@blackdave8525
Жыл бұрын
Hi have a Peugeot 2008 63 plate seems the back lights all work when turned on , but lost the back break lights , i will replace the break light switch but where is the fuse for the back lights so this can be checked as well if its blown but i have no clue where the fuse is for the back lights , where would it be and to locate it and size fuse ? any help welcome .
@RossPerryProductions
Жыл бұрын
Hi Dave, It sounds like you could be on the right track with the switch, from memory it is a simple plunger type switch and they can break quite easily. My first move would be to remove the switch and bench test it which is really simple to check its operation. I believe the lights are run through an ECM (electronic control module) on the 2008 therefore it wouldn't be as simple as a fuse as it would run the whole rear cluster (if you notice in the hand book Peugeot also don't tell you which fuse goes to which ECM). let me know how you go. Ross
@blackdave8525
Жыл бұрын
@@RossPerryProductions Hi thanks for getting back to me , i did not test the switch i just brought another one as i needed the car and at first i installed it and still the same but after driving down the road it seemed to turn the lights off which was staying on and the break and lights started to work again , the fault , when the lights was on it all looked very bright and the back top light was staying on as well , no break lights working but stayed bright , but then all of a sudden the top light went out and when i pressed the break it worked as it should , not sure if the plunger had to set itself or it sorted itself out .
@RossPerryProductions
Жыл бұрын
@@blackdave8525 it could have created a fault on the ECM but now with the new switch it has reset. great news its fixed now :) Ross
@jaanajay
10 ай бұрын
Can someone please tell me how to remove the port from where it's attached? I need to connect a transponder there and been wanting to lose the thing, so that I'm still able to put the cover back on with the transponder connected in to the port 🙄🙏🏻
@RossPerryProductions
10 ай бұрын
Hi Jaana, I believe there are a few plastic tabs holding it in place from behind. Maybe try getting your phone in there on video so you can look at the back it? Ross
@jaanajay
10 ай бұрын
@RossPerryProductions Thank you so much!!! I'll try. It's so damn narrow 🙈
@RossPerryProductions
10 ай бұрын
no worries at all, good luck@@jaanajay
@user-ii2jf9cs7h
5 ай бұрын
Bonjour j’ai un problème sur un Peugeot 2008 Anne 2017 feux de croisement droit qui marche plus j’ai changé l’ampoule mais il ne marche toujours pas !! Y’a t’il un fusible ????
@RossPerryProductions
22 сағат бұрын
Hi so sorry I missed this comment have you now fixed the issue?
@dannyboy8067
Жыл бұрын
Truly is the worst fuse box location I have seen in any car ever
Пікірлер: 34