This is possibly one of the best DIY mechanic videos on KZitem. No stupid music, no extraneous drawn out commentary or filler bits of footage. Perfect for people who need to get the job done with clear instruction. Only thing that would improve is when the clips holding the boots on were crimped - would’ve been nice to have seen true tool - also at the beginning maybe layout on the ground the tools/ parts needed to complete the job (nothing worse that taking your car to bits and having to rely on your missis to drive you to the parts shop 🤭). 👍
@gordonstevens6050
4 жыл бұрын
This chap knows how to make instructional videos. No yaking Does the job and films it Well done and thanks
@justinf1343
5 күн бұрын
Great tip to break the drive shaft nut whilst the wheel is still on the ground👍
@mrthomasburns1
4 жыл бұрын
Thanks helped a lot start to finish brilliant and great camera work
@charryedios5994
3 жыл бұрын
Very useful! And no banal commentary...much appreciated. Thank you. :-)
@marcinmarcin2964
4 жыл бұрын
Jak dla mnie to jak najwięcej filmów o tym aucie
@francis.mirage21
3 жыл бұрын
très bon travail avec rapidité merci pour cette vidéo,
@screwsnutsandbolts
4 жыл бұрын
Great job !
@guddupappu3582
4 жыл бұрын
ScrewsNutsAndBolts thanks
@screwsnutsandbolts
4 жыл бұрын
@@guddupappu3582 You're welcome :)
@adellenm25
Күн бұрын
straight to the point, no messing. brilliant 👍
@crigeorge9549
3 жыл бұрын
how easy. 6:35 On a megane2 I clobered that cv joint for over an hour with the big hamer until that circlip finaly let the cv joint out.
@taoufikbouazzati9569
3 жыл бұрын
Same here, an hour just passed and I still haven't got it loosen
@alexmorgan3435
10 күн бұрын
Not the circlip but corrosion between the splines holding it in place meaning the two surfaces will be very difficult to separate. Should have been assembled with anti-corrosion paste, a light smear of copper slip or marine water repellent multi purpose grease.
@bubnovaniklecany1
4 жыл бұрын
Thank you, I did it on my Citroen C8 yesterday.
@albertoascari2542
4 жыл бұрын
I did same on C5
@Scotkruz
2 ай бұрын
How long did it take?
@ssss-df5qz
3 ай бұрын
Can someone get my man an impact?? Like everyone has said, good there's no talking but I reckon putting tool sizes on the screen as you use them. Or showing the tool to the cam would polish these right off
@guddupappu3582
2 ай бұрын
@@ssss-df5qz thanks for your feedback
@mesaiahmedmurzaga536
5 жыл бұрын
عمل نظيف و متقن احسنت
@iosifturcanu9102
4 жыл бұрын
Bravo meserie 👍👍👍
@saeed1akuk1
2 жыл бұрын
Good work
@johnb9561
Жыл бұрын
Any idea how much this would cost at a garage?
@AKalaj
2 жыл бұрын
No need to take of the stabilizator link?
@roh007
4 жыл бұрын
Thanks for sharing 👍
@davidi2200
3 жыл бұрын
What was the problem, noise from the car ? Thanks
@guddupappu3582
3 жыл бұрын
it was make a noise when I turn
@awsomefnafbirds1804
3 жыл бұрын
Very good yaar
@misterzee5736
Жыл бұрын
Should have shown us the step where you removed the drop link upper bolt, allowing you to slide the strut into the hub easily. Extremely important step. Thanks otherwise for a good vid!
@keithwright7259
Жыл бұрын
he didnt remove it but managed to squeeze it out anyway!
@misterzee5736
Жыл бұрын
@@keithwright7259 he removed it which you can see at 12:50. You shouldn't contradict what i wrote with false information as it could mislead the unaware.
@keithwright7259
Жыл бұрын
@@misterzee5736 i think you will find its the poster thats misled the unaware not me, dop link is off by 3,50 wether its required or optional is unknown
@pauloatalaia
3 жыл бұрын
MUITO OBRIGADO MEU AMIGO ME ECONOMIZOU 300,00 REAIS, VALEU...!
@alant8595
2 жыл бұрын
Good video. Keep them coming please 👍
@wepipe
3 жыл бұрын
Excellent. Confident to do that job now. Thanks.
@albertoascari2542
5 жыл бұрын
Thanks for this I will try Cv change with the driveshaft in situ. I followed this and it worked great. Job well done
@alijahcurtis9059
3 жыл бұрын
I guess Im randomly asking but does someone know a way to log back into an Instagram account..? I somehow forgot the password. I love any assistance you can offer me.
@jackbodhi8064
3 жыл бұрын
@Alijah Curtis Instablaster =)
@alijahcurtis9059
3 жыл бұрын
@Jack Bodhi thanks so much for your reply. I got to the site through google and I'm waiting for the hacking stuff now. Seems to take quite some time so I will reply here later with my results.
@alijahcurtis9059
3 жыл бұрын
@Jack Bodhi It worked and I now got access to my account again. I'm so happy! Thanks so much, you saved my account!
@jackbodhi8064
3 жыл бұрын
@Alijah Curtis you are welcome :)
@iankendrick5753
3 жыл бұрын
Great video .... thanks
@albertoascari2542
4 жыл бұрын
Clear Video. Thanks for showing all the steps. I am going to do the otherside 10 months later.
@crigeorge9549
3 жыл бұрын
6:30 you sure it's not a cut?
@Arielquiñones-g5e
Ай бұрын
Exelente exelente un abrazo desde San Luis capital
@TonyKomaMusicSweden
Ай бұрын
Good video but that breathing tho 😂
@alam7693
6 жыл бұрын
Nice camera work
@lescooper5224
4 жыл бұрын
Thank you
@ferrari1418
Жыл бұрын
Super 👍
@Ihyseth
5 жыл бұрын
breath
@pawepablo2098
3 жыл бұрын
Excellent
@TonyG-iu4td
7 ай бұрын
Very helpful video. I like the way you showed everything without skipping bits. Thank you
@Guderian1939
3 жыл бұрын
Hi can anyone help. I was today changing the lower ball joint and forgot to tie up the assembly. I pulled the drive shaft out of the cup on osf. I pushed it back in but having trouble aligning the new ball joint with the lower arm. About 2 cms away from the hole. Any ideas anyone. ???
@guddupappu3582
3 жыл бұрын
Hi I am sending you link I hope that help you kzitem.info/news/bejne/qXx63oppr3yTrXY
@axel51849
7 ай бұрын
Bonjour, c'est quelle taille de douille pour demonter les 2 vis de l'étrier de disque ?
@fistpumpfpv5074
Жыл бұрын
Michael myers excellent video
@luispendragon6551
Жыл бұрын
Just pure action. Thanks!
@zeez3139
Жыл бұрын
Brilliant fix ! Do you remember how much the new outer CV joint cost ? Thanks
@guddupappu3582
Жыл бұрын
I bought from ebay for £15.00
@ciprianbartalis2515
4 жыл бұрын
God way to do this job .
@Ppp-kk6hw
5 жыл бұрын
Dink dank doo for me
@Ukash83
3 жыл бұрын
Will this be similliar in peugeot 206?
@guddupappu3582
3 жыл бұрын
Yes
@bill84
5 жыл бұрын
Excellent vid will do my shitroen berlingo today
@danw9096
2 жыл бұрын
No abs ring? Did this to my citreon berlingo mk2 and it threw the abs light on
@guddupappu3582
2 жыл бұрын
Abs ring on the bearing in these models not on the CV joint
@danw9096
2 жыл бұрын
I couldn't remember whether or not it had one on when i took the old one off lol but I did change the wheel bearing also so maybe broke a wire would you know if you have to have the light reset with a machine
@guddupappu3582
2 жыл бұрын
@@danw9096 does light came after u changed the bearing ?
@danw9096
2 жыл бұрын
Ye changed cv and wheel bearing came across your vid and noticed you didn't have a abs ring on your cv so had to ask
@danw9096
2 жыл бұрын
Appreciate the replys also 👍
@firozpurathottathil7535
3 жыл бұрын
Thankyou thankyou ,😍👍
@masood3096
3 жыл бұрын
Can write all tools size please
@guddupappu3582
3 жыл бұрын
For tyre 16mm, hub nut 36mm, suspension pinch bolt 18mm
@masood3096
3 жыл бұрын
@@guddupappu3582 thanks bro
@marcinmarcin2964
4 жыл бұрын
Dobra robota
@guddupappu3582
4 жыл бұрын
dzięki
@alexmorgan3435
10 күн бұрын
You didn't use any Plusgas or WD40 when undoing the nuts and bolts which would have helped them turn more easily. You didn't use a torque wrench for the hub nut which needs to be done up bloody tight to 280Nm. Again the old CV joint came off the splined drive shaft bloody easily. You are so jammy.
Пікірлер: 77