I bought this kit and love it. I am currently using an Autel scope and all that I did to add the custom probes is open them in pico and looked at the properties of them and entered the settings in the Autel software. Works perfectly.
@PineHollowAutoDiagnostics
3 жыл бұрын
Awesome! Thank you for the feedback, Mike!
@madmike214
3 жыл бұрын
Great info!!! I don't have the pico but I have the virus and the autel...ill have to try this!
@kastooMcFry
3 жыл бұрын
Thanks for the tip! Besides regular lab scopes, I also have an Autel so have been using that. I'll have to try that too.
@derwaldmeister3954
3 жыл бұрын
My deepest condolences! 350 Dollars for cheep crap, worth 50.
@scotttucker4075
3 жыл бұрын
@@PineHollowAutoDiagnostics May be a question you already addressed why not use a 12-volt pressure transducer sensor rather than a 5 volt already have a 12-volt battery in the car
@rafaelmarin1963
3 жыл бұрын
I can only admire your dedication to solving automotive problems and helping everyone out. This kit along with a direct line to you is priceless.
@kastooMcFry
3 жыл бұрын
Nice. Thanks for getting this together, Ivan. Once I get mine, I'll probably only put the battery in when I need to use it. I have not had good luck with dormant batteries not corroding in any device.
@markhoez1
3 жыл бұрын
Ivan...I'm so glad you finally decided to sell them. Ive been waiting for an affordable one for too long.
@htownblue11
3 жыл бұрын
Ivan is an industry Key Opinion Leader as the corporate lingo of these days seems to label guys as such......Well done again Ivan. Not only are you good at your craft, you’re willing to help others get good as well.
@PineHollowAutoDiagnostics
3 жыл бұрын
Thank you for the kind words 🙂
@juanheredia4426
3 жыл бұрын
You Make it look so easy Ivan
@skinlab4239
3 жыл бұрын
It is.
@thedogbarber
3 жыл бұрын
You're an amazing man Ivan. 😉
@captainhgreen
3 жыл бұрын
Interesting adapter to convert actual pressure/vac and convert to an electronic signal and then see the results on a screen.
@djosbun
3 жыл бұрын
Very cool, Ivan! The kit sounds like a great value and I hope it sells extremely well for you. If I had a Picoscope (or any oscilloscope for that matter) I'd place an order!
@PineHollowAutoDiagnostics
3 жыл бұрын
GET A SCOPE ASAP!! :)
@jesse4214
3 жыл бұрын
I'll sell you my Autel at a decent price if you would like. mswhitman@gmail.com
@Everyday_Richard
3 жыл бұрын
@@jesse4214 which autel do you have?
@mikesautomotivediagnostics8080
3 жыл бұрын
@@Everyday_Richard the Autel MP408
@steveo6631
3 жыл бұрын
You are such an enterprising young man.... Nothing but success in your future... Wish I could use this, but its way over my pay grade... I'm justa DIY shade tree mechanic... Good Luck!!!
@whatsnewonthemountain
3 жыл бұрын
Ivan, Thanks so much for making this video. I have been at a loss as to how to install the scales for a while. I'm now all set up and will give the transducer a try tomorrow. I have a '95 Chevy S10 with a 4.3L V6 that has an intermittent loss of power, stumble and stall but restarts every time and I suspect a fuel pressure issue. I know that if the pressure on the CPI system ever goes below 50psi I will lose fuel through the poppet to the cylinder. In testing the pressure with engine off, running at idle and snap throttle, all checks out OK. I'm going to hook up the Pico with fuel pressure and secondary ignition and go for a drive to see which system is the culprit.
@PineHollowAutoDiagnostics
3 жыл бұрын
Very interesting case study, Charlie! Let me know what you find 👍🙂
@AP9311
3 жыл бұрын
Wow, this is excellent tutorial! Love it! Great to see how you explain it and show how it works! I enjoyed part 1! Fantastic video! Many thumbs up!!
@PineHollowAutoDiagnostics
3 жыл бұрын
Thanks Josh! It's very user friendly and will take your diagnostics to the next level 👍😁
@AP9311
3 жыл бұрын
@@PineHollowAutoDiagnostics awesome!! Can't wait to get my first pico and scope soon! That'll be my first step in that direction!!
@billziegmond4943
3 жыл бұрын
I bought the kit when it first came out for my snapon. It works great now that I am looking at pico scopes. When I get one I will have to order the bnc style power supply. Take it from Ivan's Pressure Transducers Woks fantastic and at great price.
@PineHollowAutoDiagnostics
3 жыл бұрын
Hey Bill! You just need a BNC cable to connect to the Pico :)
@mikechiodetti4482
3 жыл бұрын
Eagerly waiting for part 2.
@scotttucker4075
3 жыл бұрын
May be a question you already addressed why not use a 12-volt pressure transducer sensor rather than a 5 volt already have a 12-volt battery in the car
@neverstoplearning382
3 жыл бұрын
Will it work on my humble micsig?. Thanks Ivan.
@baxrok2.
3 жыл бұрын
Nice kit and tutorial Ivan. Thanks!
@frankelysacostajaquez4274
Жыл бұрын
excellent master project you did, it works wonderfully 😊 how can I contact you to ask for a complete kit about everything from the junction box to the 2 sensors, hoses and adapters, because I'm about to buy 1 on ebay but I saw now on this video that with what you sell is much better 🤝❤
@dannycole9401
Жыл бұрын
Do you get any fluctuations with that compression gauge hose, or do you recommend the higher strength one you can get from pico?
@OtisPlunk
3 жыл бұрын
Nice... Could work as a stocking stuffer too.
@InsideOfMyOwnMind
3 жыл бұрын
Or dare I say Father's Day.
@drwombat
Жыл бұрын
Why are scopes still using bnc?
@dans_Learning_Curve
3 жыл бұрын
Like #216 Thanks for the video! Life is a learning curve! HINDSIGHT is 20-15!
@NorthEastRepair
Жыл бұрын
hi ivan are you still selling pressure tranducers?
@rmx2rmx
3 жыл бұрын
Hi. Can You make scales for european units like BARs or MPa or kg/cm2 for client like me? Greetings from Poland.
@PineHollowAutoDiagnostics
3 жыл бұрын
No problem 😁👍
@elipsonj
3 жыл бұрын
Hi! I'm trying to experiment a little bit, Could you please send me a link to where you buy your pressure Transducer sensors?? thank you in advance
@SilentSniperVT
3 жыл бұрын
im new to scope and have a Hantek scope. are the transducers anything special? i already have a Power supply and a cheap transducer from amazon. can i order just the transducers and adapters?
@InsideOfMyOwnMind
3 жыл бұрын
Can you use it on a Hantek 1008c?
@fercast1395
3 жыл бұрын
looking at my Modis Ultra on the probe options there are several for pressure transducers , 100PSI VACUUM, 100 PSI PRESSURE, 500 PSI PRESSURE, 5000 PSI PRESSURE MT5030 VACUUM AND MT5030 PRESSURE have you tried any of this options with your transducers or better yet buy the first and second one for your kit? just curios if it would work with the right transducers so you don't have to convert
@PineHollowAutoDiagnostics
3 жыл бұрын
Nah, wouldn't be worth the hassle. Snap-On is very limited in its scope abilities and transducer choices, plus they are overpriced lol
@brendonlind
3 жыл бұрын
Hey what is the response time of the transducer your using?
@markjenkins2736
3 жыл бұрын
I’m wondering the same thing
@matthewdale174
3 жыл бұрын
Put me down for one
@PineHollowAutoDiagnostics
3 жыл бұрын
Hey Matthew, just fill out the order form on my website (link in description) and I'll ship one out to you!
@cesarthedemonraymundo9612
3 жыл бұрын
Can I used this on autel maxyscope? If I can I will buy 1 ... I’m student learning knew things Thanks
@PineHollowAutoDiagnostics
3 жыл бұрын
It will work with any scope 👍
@jesusisthelord6593
2 жыл бұрын
Is STILL on sale?
@PineHollowAutoDiagnostics
2 жыл бұрын
YES LINK IN THE DESCRIPTION 👍
@robertmobileman8304
3 жыл бұрын
Nice one are sending to uk ?
@PineHollowAutoDiagnostics
3 жыл бұрын
Yes, international shipping is available :)
@curtday5463
3 жыл бұрын
I have a Micsig ATO1104 scope will your kit work with it ?
@PineHollowAutoDiagnostics
3 жыл бұрын
It will work with any scope! Just get the appropriate BNC adapter :)
@Everyday_Richard
3 жыл бұрын
Hello Ivan. Can you use this with Hantek 1008c scope?
@PineHollowAutoDiagnostics
3 жыл бұрын
Of course!
@Everyday_Richard
3 жыл бұрын
@@PineHollowAutoDiagnostics thank you Ivan. Haven't had time to watch video yet, so you might have addressed this. Was doing a removal when you put this out. Thank you for responding!
@robertmccully2792
3 жыл бұрын
You should put a USB video inside explaining everything, nobody else does that.
@PineHollowAutoDiagnostics
3 жыл бұрын
What's a USB video?
@jackwood8307
3 жыл бұрын
👍
@Scooterman2463
3 жыл бұрын
Do u make some for Snap-on verus?
@PineHollowAutoDiagnostics
3 жыл бұрын
Part 2 will show how to use it with the Verus
@_RiseAgainst
3 жыл бұрын
Ivan buddy, sell supplements like everyone else. Way higher profit margins without having to worry about actually helping people.
@worsttintentions
3 жыл бұрын
Jewel huh? I didn't peg you for a 90's pop guy.
@PineHollowAutoDiagnostics
3 жыл бұрын
I ❤️ 80s and 90s 😊
@derwaldmeister3954
3 жыл бұрын
Are you kidding me? 350 Dollars for this cheap crap? 😂🤣 And not including a hose? And the customer need to unscrew the box completely for replacing the battery?! I can build this for 50 Dollars. A transducer sensor costs 15, a plastic box 10, bnc connector and switch maybe 10-15, plus a few cables, most people have at home already. And I don't need a battery for that.
@PineHollowAutoDiagnostics
3 жыл бұрын
Very good, go ahead and build your own! 👍😁💪
@simclardy1
2 жыл бұрын
what does that say about the pico wps500x? The beauty of a free market is you are free to build a better cheaper unit, but i won't hold my breath.
Пікірлер: 78