I am using a 10.1" Insignia 1gb tablet that is dedicated to only Phantom 3 Standard drone running Litchi app version 3.10.10. I also forced closed not only anything DJI, but every app except for Google Play Services and Google Maps. This is the only way you can use a 1gb tablet with any flight control program including DJI Go. I don't need an expensive tablet to run an older P3S drone. I put everything back to the time it was made and was working perfectly, including the firmware for the P3S, it's loaded with version 1.05.0070 (actual file name - P3C_FW_V01.05.0070.bin) I can now do all the automated features this drone was designed for all those years ago, it works like it's BRAND NEW!
@bradbury2007
7 жыл бұрын
Thanks buddy, I wasn't sure you could downgrade firmware as I was reading somewhere you couldn't plus you helped me out with links double thanks!
@palixander4567
7 жыл бұрын
Mark brad you're welcome! :-)
@bradbury2007
7 жыл бұрын
PaliSander another strange thing is I get way more satellites now downgradeing. Dji tried to tell me I had a bad gps but I told them it was the update. Which downgradeing prove them wrong 😀
@betabilly
7 жыл бұрын
Mark, which FW version did you downgrade to? Also, take note that the number of satellites visible to the drone varies throughout the day. After all, they are not in parking orbit.
@bradbury2007
7 жыл бұрын
1.8
@betabilly
7 жыл бұрын
No weak or loss signal issues? I had weak or loss signal issues as soon as I upgraded from 1.7.9 to 1.8.1
@claricemay1525
6 жыл бұрын
Thank^s Uncle Paulinho from this Jales, Sao Paulo, Brazil
@betabilly
7 жыл бұрын
A bit of helpful advice: You don't need the app to do this. Leave your display device off. You need to place the drone in a safe spot on an absolutely level surface that is well away from speakers and other sources of magnetic interference. Do not move the remote or the aircraft during the process. Once you paste the FW.bin file to the root of a formatted SD card, place the card loosely into the SD card slot in the camera. Then turn on the remote and then turn on the aircraft. When the red linking indicators on both the Remote and aircraft turn green, push the SD card down into the SD card slot. Then walk away and make a cup of tea. It could take upwards of 20-30 minutes for the downgrade to complete. After a few seconds, the led on the gimbal will begin alternating red and green along with the characteristic beeping from the aircraft. Don't touch or move either the remote or the aircraft during the downgrade process. Once the led on the gimbal turns solid green, the aircraft will continue to beep. The downgrade is now complete. Turn off the aircraft and then the remote. Remember, the IMU, gimbal and compass will need recalibrated before you can safely fly after a firmware upgrade. This is important! Not getting a warning that a calibration is required does not mean there's no reason to calibrate. On the other hand, I would avoid calibrating the compass every time you fly. Less chance of having a bad calibration. At the beginning of your video you described that the aircraft began to fly badly after a few flights. This is more a compass issue so I advise not to store the aircraft near any strong sources of magnetism. I have had no flight or signal issues with the 1.9.20 firmware.
@joeery5699
7 жыл бұрын
Stretch 9x yup ur are correct,sometime the drone doesn't fly correctly when kp is over 5/6 due to magnetic interference(they called it a solar storm),u can check kp index on UAV Forecast app
@palixander4567
7 жыл бұрын
Stretch 9x thanks! But I always calibrate compass and check kp via UAV forecast before flight.
@emilino3992
2 жыл бұрын
now does not work any firmware from this page, compas not working after
@michaelphillips-nxs
6 жыл бұрын
DJI states that you should always turn drone off to remove or insert SD card, or damage can acure
@palixander4567
6 жыл бұрын
Michael Phillips again, it is all about the SD card - you can damage it while you remove it. But inserting card won't damage anything
@gilsanders8448
6 жыл бұрын
If the firmware version isn't right, will the quad stay silent when the SD card is inserted (no chirping)?
@palixander4567
6 жыл бұрын
I don't know, but I guess it should notify you somehow that the binary you are trying to use is wrong. For example, my first attempt to downgrade Phantom was failed and it beeped. Then I just uploaded another binary to the SD card and everything worked fine for me.
@gilsanders8448
6 жыл бұрын
PaliXander thanks brother. I downgraded to version 1.5.7 and it seems to be fine. But I will try to fly when the weather is better. ☺
@michaelphillips-nxs
6 жыл бұрын
DJI states that you should always turn drone off to remove or insert the battery
@palixander4567
6 жыл бұрын
Michael Phillips and they right! You can easily damage your SD card if you remove it or a battery while drone is on, 'cause it can write something to SD card at this moment
@monvalleytruth5111
6 жыл бұрын
Your the fucking man lol thanks a lot for your help 💪🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸
@monvalleytruth5111
6 жыл бұрын
I have the newest one which firmware should I download
@palixander4567
6 жыл бұрын
The latest one - give it a try. You can downgrade any time
@LeandroMenzen
5 жыл бұрын
Does it downgrade Control as well?
@palixander4567
5 жыл бұрын
Yes, it does
@morpheusmorph13
7 жыл бұрын
After the latest update my drone shaking in the air and crash when trying to autoland. Really frustrating. Glad it wasnt that high. So the drone still fine. And idk why my drone sometimes on dji go shows the compass stuck. I have to try again then it works but it was annoying
@gilsanders8448
6 жыл бұрын
I inserted the SD card and nothing happens. Maybe I need to buy another phantom. 😔
@palixander4567
6 жыл бұрын
All the steps are as shown on the video? And what was the factory firmware? P.S. If you want to buy another drone - look at Mavic Air. It looks like a great flying cam and I'm looking forward to buy one
@gilsanders8448
6 жыл бұрын
PaliXander I may have to buy another. Really bothers me because I like big drones. Maybe I downloaded the file wrong. Been trying for 7 hrs now.
@gilsanders8448
6 жыл бұрын
The version I have now is 1.9.2
@palixander4567
6 жыл бұрын
I had a problem with downgrading first time, but then I tried another firmware binary file and it worked for me
@gilsanders8448
6 жыл бұрын
PaliXander thank you my friend, I'll try other versions.
Пікірлер: 35