Thank you so much man!! i didnt expect this in such a short amount of time.. 😃
@johnstamatakis6908
2 жыл бұрын
@@OscZip yeahh good content makes easy subscribers!!
@OscZip
2 жыл бұрын
@@johnstamatakis6908 well i’ll definitely make sure to make more soon, and ill eventually maybe even edit the videos if i can 😅
@johnstamatakis6908
2 жыл бұрын
@@OscZip yeah man!!!
@ganggang5754
2 жыл бұрын
Im french guys and i love your videos of zip i have Peugeot streetzone 50 2t 70cc stage 6
@OscZip
2 жыл бұрын
my bro ❤️💯💯🔥
@OscZip
2 жыл бұрын
please read the description in part (1:2) thank you!
@patrick4531
2 жыл бұрын
the exhaust is may too big for mk2 racing :) that exhaust something u use on a t7 build if its portet. try a c21 or the r1400 :) then ur zip will smack som serious ass
@488sgshsh9
2 жыл бұрын
If you change your exhaust, something like a Yasuni c20/21/ stage 6 r1400/ it will run muchh better
@488sgshsh9
2 жыл бұрын
no hate!! just a tip👊🏼🙏
@OscZip
2 жыл бұрын
@@488sgshsh9 i understand that bro but theres maybe 0 setups out there with an air cooled engine and c30, im more than confident it can make some serious power combined. watching videos with c30 setups, my setup compared to them doesnt look far behind at all, and some ive seen that look slower than mine 😀
@NotSOFast597_
2 жыл бұрын
nice can malossi mhr 2 ignition go on a air cool cylinder?? I drive a Athena 70cc air cooled with a roost 70cc exhaust on stock crank 🙈🙈
@OscZip
2 жыл бұрын
yes it can bro, comes with an adaptor for the fan. and definitely get rid of that stock crank!! get a jasil evo hi tec 🔥 id be interested to see what that runs like 😃
@@2tworld.alcala copy part number online and look for other sites bro
@172rich
2 жыл бұрын
Looks good👍🏻,What's the set up?
@OscZip
2 жыл бұрын
stage6 mk2 70cc air cooled, Yasuni C30 exhaust, stage6 RT oversize variator, frontface, belt and torque converter, malossi mhr team 2 inner rotor, 28mm PWK carburettor, stage6 drag air filter, jasil evo hi-tec crankshaft, malossi oversize small end bearing, malossi delta clutch with clutch bell (adjustable), stage6 hard/red clutch springs set to max setting on the clutch, polini 360 intake manifold with spacer, artek k1 reedblock with carbon fibre reed petals
@172rich
2 жыл бұрын
@@OscZipwhich is the better cylinder stage 6 mk2 or malossi mhr
@OscZip
2 жыл бұрын
@@172rich i cant tell you bro, stage6 is fast, mhr also looks fast 😃 i think you will be happy with either, but stage6 is alot cheaper
@calsgone6653
2 жыл бұрын
@@172rich stage 6 for overall power.
@BT.70
Жыл бұрын
@@172rich top performance tpr ✅
@calsgone6653
2 жыл бұрын
💨 💨
@destroiedworld8739
2 жыл бұрын
What's a carb? Main jet? Filter type? Aspiraton? Rollers weight?
@OscZip
Жыл бұрын
28mm PWK carburettor stage6 drag race air filter 4.3g rollers
@destroiedworld8739
2 жыл бұрын
Exhaust?
@OscZip
2 жыл бұрын
yasuni C30
@jaydenaalberts2578
2 жыл бұрын
Dat mag niet Jo
@nutzen3902
2 жыл бұрын
Ur main jet is too big
@OscZip
2 жыл бұрын
ive upjetted alot of sizes just for some runs to check everything is fine. im still working on the wiring for lights and everything so dont want to be worrying about jetting too much until its all legal to ride etc.
@Jannepannetpapanat
2 жыл бұрын
Jet size in this? My setup is almost same..
@OscZip
2 жыл бұрын
@@Jannepannetpapanat im not 100% sure mate, i chucked a jet in like 10 sizes up because it was running lean. so just left it with this just until i sort all the other issues out like wiring etc. once its all done i’ll find the perfect jet. this one seems very close though, maybe only 1 or 2 sizes down. ill let you know what size jet as soon as i have a look on mine! very roughly, at the moment its around 130/138
@Jannepannetpapanat
2 жыл бұрын
@@OscZip Ok, thanks. I have 130mj for now. Its ok but still not right, hard to say it has orginal ignition till next week..
@OscZip
2 жыл бұрын
@@Jannepannetpapanat inner rotor? if so it will need a slight pilot/main upjet due to it revving more freely and aggressively
Пікірлер: 40