Beautiful engine! I love my old pico’s might have to get something like this as an upgrade
@kings-racing
Жыл бұрын
Thanks 👍 This Picco p3tt performs really good. It's a good affordable engine, although i had a issue with the coating on the crank. Check out my vid Picco p3tt 5 gallon review. I got the coating of and it still runs good 👍
@jeremiahrobles4038
2 жыл бұрын
Wow that picco p3 is a nasty little engine! Wish we could get them easily in the us. Nice video though man!
@kings-racing
2 жыл бұрын
Thanks man 👍. the P3TT performes very good . Ran it on the track in the X Elite and really liked it. Think even more than the reds 521.
@leonjansevanrensburg8186
3 жыл бұрын
The picco p3tt is very popular here in South Africa a lot of guys here race those motors
@kings-racing
3 жыл бұрын
I can understand that. The Picco performed really good and is affordable 👍
@mattfavor2940
3 жыл бұрын
The coating on that pipe look like the old dynamite 086 pipes. If that’s the case then it will be durable and look brand new for a verrrrrrrrry long time. I’ve had my dynamite 086 pipe for at least 10 years and she looks just like the day I bought it still.
@kings-racing
3 жыл бұрын
Don't know that dynamite pipe. Think this is a hard coating like the black ones only does not change of color... And it was very easy to clean. So i hope you are right and it will last a long time, because i love this pipe. 👌.... 👊
@mattfavor2940
3 жыл бұрын
Yea I think it may be the same coating. The dynamite is the same color as that one. Also I’ve also got the p3tt and run the 2166 pipe and it’s quite nasty. If you have a novarossi 9886 or any other 086 pipes you should try it on that engine. Novas and piccos make lots of power on that pipe as it is a 2 chamber pipe instead of a 3 chamber which kills some of the power in most cases. Nova 9886,dynamite 086 or the ofna 086 pipes will all be awesome if u can find one of them. They really are the best all around pipe for about any engine except of os speeds
@kings-racing
3 жыл бұрын
I've searched for the 9886 and the 086, they are simular so i had read. But they are nowhere to be found here for a long time. On my novarossi i run the 9901, i had read it's about the same as the 9886....nevertheless, the hipex 2135, Ultimate 2141, reds 2143 are badass bottomend pipes👍..... 👊
@gwizzfpv6741
3 жыл бұрын
This looks faster than most battery RC amazing
@kings-racing
3 жыл бұрын
Think it's roughly similar to 6s.... But the experience is far more intens 💨💨💨🤘
@needmoreboost6369
Жыл бұрын
@@kings-racing nah it’s better than 6s because it’s still got tyres on it and it’ll leave the track in one piece
@chinomontoyo5459
Жыл бұрын
This is stock engine??? Wow that pipe whorck great
@kings-racing
Жыл бұрын
Yes,stock engine. Really good!! Hipex 2135 is a great pipe Thanks for watching bro👍👊
@TastyBRC
3 жыл бұрын
That engine is on a whole different level than my p5's, i wasn't expecting that kind of performance 😯 That was also a great video, thanks for the review. 13t clutchbell ??
@kings-racing
3 жыл бұрын
It surprised me too 😃.... Maybe also deu the hipex pipe, it's really good 👌..... Really good engine, surtainly for the price👌... Thanks man 👍 Yep, 13t original tlr clutchbell.
@TastyBRC
3 жыл бұрын
@@kings-racing fast like a 14, sounds like a 12! I dont know anything about pipes, maybe i should look after a good pipe for my nova to get its best performance
@kings-racing
3 жыл бұрын
Yeah, that's right 👌.... Maybe look at the hipex 2135 EVO2 fastlock HD,... It's on offer around the corner in italy. Still quit expensive tough... €106,-......but one of the best pipes on the market..... Maybe the best!!
@patrickturri
2 жыл бұрын
Do you have a favorite .21 engine. Looking for my next truggy and buggy engine. I have plenty of .28’s and wanted another 21. I like this engine and the reds 721 or one of the fx engines. Thanks for the videos .
@kings-racing
2 жыл бұрын
I like my Ultimate M3X v2 ceramic and i'm in love with the FX K301EC. These are both square engines (16,4x16,4), excellent for truggy.in my opinion. If you ask me i would deffinitely prefer the FX engines. A K303 and K502 if i needed a truggy and buggy engine now . With a high torque pipe and smooth pipe in buggy. Or Ultimate M3X and M5S. Also very good. If you are on a budget the Picco P3TT is a really good buggy engine. Don't know in a truggy. Never ran it in a truggy.. But if you are gonna spend Reds 721 money i would deffinitely prefer FX! You won't be sorry. Appreciate you watching buddy 👍👊
@patrickturri
2 жыл бұрын
Thanks for the reply and last question what in your opinion is the best torque pipe out there now? Hipex 2135? Thanks again
@stefanheijmans3462
3 жыл бұрын
Nice corkscrew jump 💪👍🏻 Which tyre/wheel combo are on that kit? Nitro is the glory 🔥🔥🔥
@kings-racing
3 жыл бұрын
A nice jump by accident😂 These are the tlr wheels that came with the kit, with the Schumacher yellow mini pins. Yes sir !!! 🔥🔥🔥💨💨🤘... 👊
@thom3479
2 жыл бұрын
Hey Kings, what did you not like about the standard glowplug. Ik just bought the engine and in doubt what spare plugs to buy for this engine. Running 16% in the Netherlands. Thanx
@kings-racing
2 жыл бұрын
Hey Thom, during the ground tanks it wasn't running steady, so i changed the glowplug from P5 to TS3. Running it now with16% at the track and It's really good. Still with the TS3. So TS3, P3 or X3 would be perfect.
@thom3479
2 жыл бұрын
@@kings-racing Thank you! A few days ago I ordered the OS P4 turbo plug, do you think this will also work fine? I was wondering do you also like this engine on the racetrack even though you got more expensive high end race engines to choose from?
@kings-racing
2 жыл бұрын
@@thom3479 sorry for the late respons. Didn't see it untill know. P4 might work good aswell. And i like the Picco on the track. It performs really good 👌 and plenty of power
@mc83ssls1
3 жыл бұрын
Do you like this engine more than the reds 521s?
@kings-racing
3 жыл бұрын
I think so yes, think the Picco has some more topend (becaus the boost port maybe) 🤷♂️, three needle carb and a ceramic bearing. And it's a bit cheaper. They all are good, but if i must choose, think the Picco. If i had to choose between the Picco and the r5r, then probably the r5r.
@anderssonrc6379
3 жыл бұрын
Hi, how about picco 2166 pipe ? Do you recomend? Take care
@kings-racing
3 жыл бұрын
I've got no picco pipe, so i really don't know.....
@cammac1393
3 жыл бұрын
Does it have the tilted exhaust port? Thanks
@kings-racing
3 жыл бұрын
No, it's not like the r5r. It's straight.
@soppdk
2 жыл бұрын
Hey Thanks for the video, i just got me a P3TT But I have trouble tuning it. it keeps stalling for me. i set the idel gap, but how have you set your HSN and LSN? its sounds verry nice
@kings-racing
2 жыл бұрын
Congrats on your engine. I absolutly like it. I had the same problem during the ground tanks. It comes with a P5 glowplug. I changed it to a TS3 Reds plug, but a P3 or X3 would be perfect aswell, so change your glowplug and try again. 👍
@soppdk
2 жыл бұрын
@@kings-racing Hey Thanks :) i have a new OS P3 ultra hot plug. can i use that ?
@kings-racing
2 жыл бұрын
@@soppdk yes you can. It will run much more consistent. 👍
@soppdk
2 жыл бұрын
@@kings-racing hey i tried the P3 and its runing better, but i have alot of problems tuning it. it will stall on my when i break,. any chance you can tell me how you set your LSN/HSN and Idle screw, so i have a starting point. Thanks
@kings-racing
2 жыл бұрын
@@soppdk okay, when it dies on the brake could indicatie a clutch problem(spring or bearing) or the servo is set incorrect ( be sure the carb slide doesn't move when you brake)... My idle gap is 0,6mm, hsn is 0,7mm in from flush, lsn is 0,35mm in from flush.
@johncullinane4868
2 жыл бұрын
Which fx engine is best for truggy? Thanks bro
@kings-racing
2 жыл бұрын
K301-303 on a small or medium track. I can imagine if you are running at a large high speed track the 501 (502) would be better. 👊
@johncullinane4868
3 жыл бұрын
Where can I get that pipe brother thanx
@johncullinane4868
3 жыл бұрын
And engine would like to try don’t have any piccos
@kings-racing
3 жыл бұрын
Don't know where they have that over seas....... I ordered the pipe straight from Hipex Italy and the Picco at PCM shop France....
@kings-racing
3 жыл бұрын
Hopefully you can order it somewhere..... You won't be sorry 👌 It's really good 👍..... 👊
Пікірлер: 49