new subscriber here,,,,,very nice work, thank you from Florida, Paul
@in2rock275
9 ай бұрын
Clear, concise and to the point. If you can't cut a picture frame from this video, you may want to pursue another hobby. Best video for cutting a frame I've seen. Thank you!
@Amarks33
2 жыл бұрын
Daniel, just wanted to say thanks. I've watched a lot of these types of videos, and your video is as clear as it gets, and for that, I want to say thanks.
@aricar325
Жыл бұрын
Excellent tutorial. All the important information in a straight forward and succinct presentation. Thank you! Looking forward to watching a few other of your videos on picture frames you linked in a reply to a comment below.
@hmtrimworks7148
Жыл бұрын
Very good for teaching the very basics and not to overwhelm a beginner 👍
@andrewkeighron6708
2 жыл бұрын
Thanks for this video, it’s revolutionised my frame cutting 👍🏻
@danielwebster1182
2 жыл бұрын
Glad it helped!
@mariekiraly100
2 жыл бұрын
Great video.
@foltz-art
2 жыл бұрын
Great ✌ Job D🙏💯% cool.
@danielplumb7981
2 жыл бұрын
Hey, 100th subscriber. Great video.
@CharlieGroh
6 ай бұрын
I pretty much always cut into the profile first...cleaner and if you're marking that side it's right in front of you...
@priyacomputers
2 жыл бұрын
Thanks for this video How to set measuring scale
@foltz-art
2 жыл бұрын
New Sub and like ✌🌞🐈⬛
@jameskrieger7741
9 ай бұрын
Please explain. how you calculated the 14 ½" for the first two cuts.
@carlflemmig4962
2 жыл бұрын
Daniel, that's a great video I want to thank you for sharing it with us. I'm new to wood working and I'd like to know how you made the rabbit. I'd also like to see you put it together. Thanks Carl.
@danielwebster1182
2 жыл бұрын
Hi Carl, I cut the rabbet on a table saw with a dado blade. A router table or router with fence would also be fine for this. Here's a couple of other videos that might help with building a frame: kzitem.info/news/bejne/sX-Ln6FpaXOqa6g kzitem.info/news/bejne/1q1ttYRtiYaHpKw
@hubert-williams3379
8 ай бұрын
Hello, I want to make a 16 x20 or 20 x24 frame what cuts should I make to start to get the correct size for the inside to measure the same size
@rogergordon9617
2 жыл бұрын
Hi Daniel, Can I build a jig to create splines, using my miter saw? Sincerely, Roger
@amwartwork
2 жыл бұрын
thanks for the tip. i always get headfuck when working out sizes regarding rebates so for example i want to frame for an A4 photo. 29.7x21. my inside edge to edge is this measurement but with a 5mm rebate this then means to picture will fall through. so.... do i reduce each piece. of the frame by 5mm? i struggle with maths. once i get a technique practiced and applied to all frames i will be happy
@danielwebster1182
2 жыл бұрын
We all get confused with math like this, and it's why I measure directly on the rabbet. Make sure you cut the first angle with the rabbet down and against the fence, and then the second cut has the rabbet up, meaning you can make a direct measurement along the rabbeted edge.
@jimaspinii7579
Жыл бұрын
I saw no,dust from your miter saw cuts! What is your secret?
@shreedharmanganavar2691
2 жыл бұрын
Price plz & machine name
@jitendragupta4233
2 жыл бұрын
price
@shreedharmanganavar2691
2 жыл бұрын
Haii sir I want this machine plz help me
@bowmanj603
Жыл бұрын
A frame that is 8x10 isnt for an 8x10 picture. It's for a 4x5 or 5x7 or something. If youre taking the time to make a frame for a picture then take the time to matte the picture as well. 11x14 for an 8x10 picture. always at least 1 size up
@arachosia
10 ай бұрын
Could be for a painting. A painting doesn’t need a matte. Indeed, it would generally look much worse with one.
Пікірлер: 27