After watching countless PID videos to try and get understanding of PID separately, I can honestly say that your video was by far the most straight forward, easy to understand and straight to the point. Simplicity is key and you did that super well! Thank you so much!
@raoabdulhadi
Жыл бұрын
You wrote it already what I wanted to write.
@TrFusion
5 жыл бұрын
D is watching sudden change of position within the fraction time to give feedback. It does’t matter where the target is. So .. 1. Set P for the smooth and sluggish curve. 2. Set I to help add power to P if it is taking too much time to get to the target. 3. Set D to push the power back if I is doing too much work and excessive acceleration. P I’ll try to get to the target. I I’ll give you extra power because you are taking too much time. D I’ll slow you down because I is giving too much power and detected sudden movement in short period of time.
@MrLeon3773
5 жыл бұрын
Thanks for the brilliant comment!
@pastrie42
4 жыл бұрын
This was so much better of an explanation of what each one does.
@BobtheBuilder0
4 жыл бұрын
This made it really clear for me, thank you!
@sunsetpark_fpv
3 жыл бұрын
Nice breakdown!
@YassineSfaxien
3 жыл бұрын
Good explanation. Thx
@pjohnston84
6 жыл бұрын
I've seen a lot of pid videos, but this graph does a great job demonstrating what is going on. The graph is very informative Thank you!
@WhipGear
5 жыл бұрын
The best explanation of quad tuning I have seen thus far... You are the Khan Academy of quad-copters... Keep up the good work.
@BayLA415626
6 жыл бұрын
best discription i ever head out off all the videos i ever seen on tuning. i wii finally be able to tune my quad.. thanks a lot for breaing it down in a way anyone can understand and not just making stuff up....
@liuyanxin5900
5 жыл бұрын
That’s a really great presentation, now I got some basic understanding of PID control! Thx a lot!
@TormodSteinsholt
3 жыл бұрын
P term is a rubber band with a resting length of zero. It needs distance to produce tension. If you increase the load on a rubber band, it needs to stretch further in order to produce the correct tension. This is insufficient for a regulator since you expect a regulator to compensate. The I term naturally complements the shortcoming of a rubber band. And since both pull towards the setpoint, you need the D term to compensate to avoid overshoot.
@michaelosinowo226
6 жыл бұрын
this is the best theoretical explanation so far
@kaushalmody9617
4 жыл бұрын
Great job man, simplified PID explanation. Just what I wanted.
@WacekDziewulski
5 жыл бұрын
This is just about the best explanation of PIDs ever! I've watched a lot of videos on the topic including Joshua Bardwell's PID tuning masterclass and as much as I appreciate his practical approach, You've just nailed it in theory! Understanding Your video gives one a clear view on the Anti-Gravity and Feed Forward in Betaflight. Thanks for allowing me to grasp the whole thing. Awesome job! Subscribing for more!
@marien1991
5 жыл бұрын
Thank you for making me understand the use of each one of the three terms. Before this explanations, everything was like XYZ in mathematics, but from now on i will have in mind what PID means when calculating. It will make a big difference, thanks to you.
@suyongpark3125
6 жыл бұрын
Kudos on his ingenuity! Thx a lot!!! :-) Your lecture helps me to survive final exam.
@69RocketBones
3 жыл бұрын
Have been struggling to understand PIDs for ages. This video helped a lot. Thank you. :)
@FAB1150
5 жыл бұрын
This is the best explanation I have ever encountered, thank you!
@mikebarkasi6467
3 жыл бұрын
Excellent way of explaining how PID effect the performance!
@RimmyTimfpv
6 жыл бұрын
This makes more sense to me than any other PID explanation video I've seen, so thank you. I've been flying for about a year and have never really been able to visualize what each term does, and I just built a quad that is giving me more trouble to tune than my other two quads ever did, so I'm here to learn!
@AlexandreLeone
4 жыл бұрын
Very good explanation dude! Now I know all I need to know about PID!
@dk1415
Жыл бұрын
OMG finally someone to dumb down PIDs for me! I have been searching forever! Thank you soooooo much!!
@tazblink
4 жыл бұрын
I have to write and say thank you. I built a PID box to control oven temps and I have been screwing with it all day. I knew what I wanted it to do but I just didn't know how to get there. Your explanation of D solved my problems. I was getting a 20 degree over and 10 degree under oscillation. Now I am getting a .1 to .3 degree over oscillation and thats it. It holds at exactly 167.0 to 167.3. Perfect for killing covid-19 on masks gloves whatever. I am using 2 oven thermometers to verify the temp and it is dead nuts. Again thanks so much I hadn't heard D explained that way before and it all clicked when you said it. TAS
@otiliamarc4040
4 жыл бұрын
This video was so good and easy to understand!! Huge thanks!!
@ENOKFPV
7 жыл бұрын
This is a really nice look at PIDs. Good work.
@safian31337
7 жыл бұрын
You sir are a great teacher.
@dronereaper772
5 жыл бұрын
Awesome video this has already help me in this Awesome hobby/sport you are a excellent teacher this video will help every beginner like myself that’s intimidated by tuning cause some people in the sport are so advanced that they are far removed from knowing and understanding how a beginner thinks 🤔. Thanks so much this has shaved months maybe longer off understanding Fpv in its entirety 😃👍
@gilbertproductions4754
3 жыл бұрын
This is the perfect visualization i needed. Thank you
@shubhamnayak8148
3 жыл бұрын
Why do we use a PID controller if the only thing that it does is to follow the input. Why dont we directly fed our input to the system instead of passing it through PID.
@blackmaggotfpv
3 жыл бұрын
That's the best explanation outhere! Thanks!!
@nofianto
3 жыл бұрын
your explanation about PID basic concept for drone is the best... easy to understand and simple....
@samuelpaes2
3 жыл бұрын
OMG, YOU ARE THE BEST, I AM A BRAZILIAN STUDENT OF ELECTRICAL ENGINEERING AND YOU HELP ME SO MUCH, THANKS MAN
@pierschan4467
4 жыл бұрын
Great explanation on PID's physical meaning!
@cameronjacobs3144
6 жыл бұрын
Great video! When someone asks me about pid's I show them this video
@ayoubboutebal1549
5 жыл бұрын
Very well explained ! it helps controling compressor speed for AC loop
@julianfiller8731
5 жыл бұрын
Straightforward and to the point. Thanks
@Malik.essadi
3 жыл бұрын
Best simplifying video on PID ever
@rl2109
6 жыл бұрын
I'm surprised that I am just finding your channel... Absolutely worth the sub! Thanks for posting; I'll be checking out other content on your channel...!
@rodrigodiniz13
3 жыл бұрын
Wow. that was the best explanation about PIDs ever!
@iFlySometimes
6 жыл бұрын
Surprises me you don't have more subscribers, your channel is great. Keep it up!
@pastrie42
4 жыл бұрын
Considering his video is completely wrong, I disagree. The comments, thankfully, saved me from this bad information.
@ardentdfender4116
4 ай бұрын
One the best explanation I’ve come across watching quite a lot of PID vids. Still trial and error in tuning goes a long way. Especially if you got a very good updated trend to look at on a short time scale like inn15-30 min span or so. That allows you to see how things are playing out on a trend in adjustment as you try to smooth things out.
@Ger.FPV2023
4 жыл бұрын
Perfect explanation! Thanks!
@user-di4bt7qu2i
Жыл бұрын
This is a great explanation. Thanks for posting!
@desolatekd
9 ай бұрын
Really a great way you explained the most complicated part. Thanks
@tigerseye73
5 жыл бұрын
As an electrician, I sometimes had to tune PID for process temp. control. I was able to muddle through it but it was sometimes frustrating. Wish I could have viewed your channel years ago. Thankfully, most micro controllers now have auto-tune feature. Turn it on and let it do its thing. Your video can be applied to many different control application. Thanks for sharing.
@johndarwinmateo796
2 жыл бұрын
What if auto tune doesn't fix the problem what would be the best way to fix it?
@johndarwinmateo796
2 жыл бұрын
I'm fixing an oven in our laboratory and it has a pid controller I tried to autone and offset the controller the pv and the sv is already equal unfortunately the actual temperature in the inside is very high
@acr_-kj8gd
5 жыл бұрын
the illustrations made it simple, I like it
@chaizxcv8810
6 жыл бұрын
Thx. This is so easy to understand.
@GLXYFPV
4 жыл бұрын
This is incredibly helpful thanks!
@isramv74
2 жыл бұрын
great video, now I finally understand PIDs , thanks you!
@hancock780
2 жыл бұрын
Why is it that no one else could simplify what's going on. I've watched many many videos and read lots and I could never retain what was going on. You made this so simple to understand.
@SSBelmont
6 жыл бұрын
Very well explained in simple terms, well done, subbed you
@captainkook9371
6 жыл бұрын
You've got a stable pulse on your mouse. Very helpful video. Thanks.
@RushitShukla
2 жыл бұрын
Thank you for uploading. Well explained.
@choicefpv4331
6 жыл бұрын
Thank you, nice job.
@SerhiyVoytenko
18 күн бұрын
Thanks!. It's the best simple explanation
@seankiverchuk4627
9 ай бұрын
Thank you for your explanation of pid I been trying to figure out how it works.
@srviejo2298
6 жыл бұрын
Excellent video!
@lavexitosh
Жыл бұрын
Thanks for the simplified explanation!
@G.J.G.P.
Жыл бұрын
Dude, i was here, because to know the meaning PID for tuning a stand alone ecu. But somehow i think its basicly the same and you explained it very good😅
@chouitala1727
4 жыл бұрын
That's amazing
@VaibhavKulkarni1991
Ай бұрын
You explained very very simple sir,thank you so much
@turpialito
3 жыл бұрын
Great explanation. Kudos.
@nikitam6164
6 ай бұрын
thank you for the wonderful video. Helped me understand better :)
@TheRainHarvester
3 жыл бұрын
Have you ever tried zeroing out the kterm (the accumulating variable) when crossing the setpoint? I noticed it's always retaining it's value when overshooting, when it should really help to go the opposite direction.
@vladimirmonakhov8770
Ай бұрын
Thank you. Thank you! Thank you!!!
@syaralhabib6969
4 жыл бұрын
Thanks, very helpful information
@fpvpf
3 жыл бұрын
Thanks man. I've now better understanding of PIDs.
@shubhamnayak8148
3 жыл бұрын
Why do we use a PID controller if the only thing that it does is to follow the input. Why dont we directly fed our input to the system instead of passing it through PID.
@j0joe33
4 жыл бұрын
Referring to the beginning of the explanation: P term, as i understand it. does not slow down or speed up. That is derivative. P term also does not move back and fourth. That is Integral. The P term tries to move to the target, but because of physics, it ends up being in the wrong place. It outputs proportional to the input. If the p is 2/1, it outputs 2 for every 1. It is one number, the desired destination. Integral and Derivative correct the errors.
@catalystmachineworks4794
3 жыл бұрын
You won the nerd contest. You are king nerd. Well done.
@illtryanything5264
27 күн бұрын
The human brain and body are massively proficient at PID. I just tried it a bunch by touching things quickly. I never would have thought about that aspect of the body until just now.
@shlukyy
6 жыл бұрын
Great explanation.Subscribing.
@carlosmolina4892
2 жыл бұрын
really nice explanation. thank u
@vasaaviarion
Жыл бұрын
I got inspired to learn about these after watching the brick experiment channel build an automatic depth control Lego submarine.
@fabricio.ferrari
3 жыл бұрын
good explanation. Btw, what instrument do you use for drawing?! thanks
@ukaszwasniewski7668
3 ай бұрын
Well done 👍 thanks man
@idavancunha8246
10 ай бұрын
Great explanation! 👏
@boxer71c55
Жыл бұрын
Awesome explanation!
@simij7350
3 жыл бұрын
Awesome! Thanks a lot
@gerardjanssen4122
4 жыл бұрын
Thank you!
@XyberZyen
7 ай бұрын
Great grea video and explanation thx
@MichaelUtah
5 жыл бұрын
really insightful...
@totoilongo6132
5 жыл бұрын
Thanks for sharing
@calebsherman886
6 жыл бұрын
9:05 Just gonna let you know those arrows are backwards in size, as it curves away the arrows are bigger but in the center of the curve they're smaller because less change.
@SiieeFPV
6 жыл бұрын
good catch, I'm drawing the value curve but thinking about the acceleration curve
@andrepb_inc
6 ай бұрын
Thank you
@ngcebomadziba2305
3 жыл бұрын
wow, best explanation ever
@kubilayakbulut5302
3 жыл бұрын
did you see any code example like this explanation?, I mean basic codes
@senalperera8629
9 ай бұрын
Great explanation 🫡
@sunsetpark_fpv
3 жыл бұрын
Awesome explanation. Your simple, colored lines and dots were a great visualization of your explanation. Looking at your dots made me think - hmmm....looks like iteration steps over time......which brings my question: How many times does this process iterate in a single second? I know my loop is set to 8kHz. Is that 8000 times a second? Or is it a higher magnitude, like 8 million? Thanks for the great video. 👍
@hildevanesch2000
5 ай бұрын
Hz = per second, kilo = magnitude of 1000, so indeed 8000 times per second ;)
@Warlock0880
6 ай бұрын
I had a foreign professor teach a class on Control Systems. These concepts didn't make sense until I started manipulating objects in Godot. My cube is orbiting my target point.
@rahulrpatil3005
4 жыл бұрын
Thankyou SIR . Thankyou very much
@NJ-md8uu
4 жыл бұрын
love yr class thank *1000 so much
@fellstar
7 жыл бұрын
Great writeup.
@janfilipi5947
Жыл бұрын
Thanks a lot
@florentinosanchez3969
Жыл бұрын
really nice video
@manojyadav6967
7 ай бұрын
best explanation
@user-ds6qf9tv4u
3 ай бұрын
Thx!
@godsun358
4 жыл бұрын
.kool way to look at P.I.Ds
@ionpavelescu2125
24 күн бұрын
thanks a lot
@nerdCopter
3 жыл бұрын
+1👍 💪 best one, i refer to it often
@shubhamnayak8148
3 жыл бұрын
Why do we use a PID controller if the only thing that it does is to follow the input. Why dont we directly fed our input to the system instead of passing it through PID.
@zrmsraggot
2 жыл бұрын
Is it possible to create a PID controler that won't allow overshoot like ' You need to stop this car right before it falls off a cliff '
@neosandi6
Ай бұрын
I finaly understand ,,, thenx
@mrbradley8743
3 жыл бұрын
I just don't understand. Whenever I see other examples, it shows a high rate of change (approaching set point quick, say a PV of 40degress and set point of 50 degrees)giving D a high value. If we are approaching a set point and want to avoid overshoot, is the D value inverse? So the D value gives a minus value to the PID controller to lower the power to avoid overshoot?
Пікірлер: 185