I learn more on KZitem on my own than I ever did in school.
@jeygenraam
2 жыл бұрын
I hear that, @BodyBagS. I find that often too. My suggestion for you, though, is that you consider what kind of thing you're trying to learn. If it's something like science or engineering or math, I like going to KZitem to see what's there, but some things are better to learn from a trusted adult. For example, I would not go to KZitem to learn about relationships, or religion, or politics; there is too much opinion out there that people are stating as fact. I hope you have an adult in your life that you can look up to as a good role model, who can help you become the best person that you can be. I hope that wasn't too 'heavy' 😀
@troyboyplays
5 ай бұрын
You teach better than my real teacher
@orchids4media343
2 жыл бұрын
THANK YOU SO MUCH!! I FINALLY UNDERSTAND HOW TO DRAW A PROPER CIRCLE WITH A PROTRACTOR!! THANK YOU, AGAIN!!
@JasonEygenraam
2 жыл бұрын
I'm so glad that you found the video helpful, Orchids 4media! Thank you for your comment :-)
@keyurkshirsagar7104
7 жыл бұрын
gud explain and ur jokes are funny like my protractor is only 180 degrees
@khanyamajola5925
2 ай бұрын
Thank god you exist 😂
@guryakhan2370
10 ай бұрын
Thanks brother now I understood how to draw
@Im_just_him1
2 жыл бұрын
thanks I can pass my pie chart test now
@jeygenraam
2 жыл бұрын
Good luck! Knock it out of the park!
@maureenbramwell-mcleod9559
2 жыл бұрын
Great job!
@sarwatsyeda6469
3 жыл бұрын
Thank you sir.. .. I was really worry about pie chart but now I can by myself
@jeygenraam
3 жыл бұрын
So glad to hear that! All the best to you with your pie charts :-)
@yaseenmuhammed9574
Ай бұрын
Super boy
@syedasana8418
3 жыл бұрын
Thank you so much sir! This was of a great help to me
@jeygenraam
3 жыл бұрын
Thanks, Syeda, so glad that it helped you!
@yogeshbhakare187
5 жыл бұрын
Nice job sir
@beanyys1158
2 жыл бұрын
How do you decide whether to use the inner scale or the outer scale?
@jeygenraam
2 жыл бұрын
I'm glad you asked, Beanyys. When you place the protractor on the one line of the angle you want to measure, see whether the angle's line points at the zero of the inner scale or the outer scale. Whichever one it is, that's the one you use. Another way of looking at it is this: Look at the video at 2:55 - I have lined up the bottom line of my protractor with the line inside the circle. I look for the zero that it's pointing to, at the edge of the circle, on the protractor. Is it on the inner scale or the outer scale? Whichever one it is, that is the scale you use. Also: watch at 3:16 for about 15 seconds; it shows that you start counting at the zero and count up until you get to the appropriate angle. I hope this helps; if not, let me know and I'll make a quick video to demonstrate. Happy math-ing! 🙂
@itz_lilaa
2 жыл бұрын
thank you so much!! this is a big help
@asunomatheodora7509
Жыл бұрын
Did u understand
@nyxx.9424
3 жыл бұрын
Thanks sir its helps a lot 🙏❤️
@ridhammahajan6780
2 жыл бұрын
Thanks for the video
@sarveshsharma7914
6 жыл бұрын
Ok nice
@vsrinivasavsrinivasa8969
9 ай бұрын
Great job you should do as lecture in college
@Deadly_Timnot4ound
11 ай бұрын
Thanks really helpful 😊
@Zirconrecords666
2 жыл бұрын
Thanks sir, I very confused
@gmmobassir8044
2 жыл бұрын
Nice
@rakeshkumarjha2458
3 жыл бұрын
Thanks sir for tell this question 😍😍😍
@jeygenraam
3 жыл бұрын
You are very welcome, I'm glad that it helped you!
@andrealobo18
2 жыл бұрын
THANK YOU SO MUCH!!! This helps so much!
@jeygenraam
2 жыл бұрын
So glad to hear that, @andrea lobo! Glad I could help.
@prabeshoza142
7 жыл бұрын
you have made bt wich class iz
@riyazriyaz8495
6 жыл бұрын
Sir how to protect 115.8° please tell me
@manjasolanki8056
6 жыл бұрын
Aman Solanki
@jeygenraam
6 жыл бұрын
Hi there! The easiest way for a 115.8° angle is to make your base line, put your protractor down on it as described in the video, with the end of the line right at the mid-point of the protractor (where the 90° line meets the 0° line). Start counting at the zero where your line is pointing to, past 10°, 20°, 90° and all the way to 115.8°. Put a dot there at 115.8°. Move your protractor and use either the bottom of your protractor or a ruler to connect the dot you just made to the end of the line that was at the mid-point of your protractor. Don't forget to label your angle! Best to you, J
@cherylblossom3394
3 жыл бұрын
@@jeygenraam thanksssssssssssss a lot!!! i have a similar problem thank you!
@Rubiealcordo
Жыл бұрын
thank you thank you so much.
@JasonEygenraam
Жыл бұрын
You are quite welcome! I’m glad it was useful.
@usershawn9601
Жыл бұрын
lol
@sarwatsyeda6469
3 жыл бұрын
Thanks sir
@rodinaamr459
6 жыл бұрын
ممتاز
@user-qd3fl2ko3e
Жыл бұрын
Hey you stopped posting
@jeygenraam
Жыл бұрын
Yes, it's been a while; I'm sorry. I used to post these videos for students in my class and anyone else who might be helped by them, but I'm not teaching in a classroom currently. I'm happy to make more content - I love doing it - what do you want to see? Have a great day!
@raamkumaar8872
5 жыл бұрын
Sar Dard
@aidymurph3887
2 жыл бұрын
This didn't help me 1 bit it helped alot
@jeygenraam
2 жыл бұрын
I'm really sorry to hear that. If you'd like to let me know what was hard to understand, I'd be happy to try something different that may be better for you. Just let me know 🙂
@aidymurph3887
2 жыл бұрын
@@jeygenraam sorry yesterday I was really stressed with all of that stuff but I re watched and now I get it so thx you
@jeygenraam
2 жыл бұрын
@@aidymurph3887 So glad to hear it! Have yourself a wonderful day!
@aidymurph3887
2 жыл бұрын
@@jeygenraam you to
@chungch469
4 ай бұрын
This toturial is useless😢😢😢😢😢😢😢
@jeygenraam
4 ай бұрын
I'm sorry to read that you did not find this useful, @chunch469. I hope that you find another source that helps you better. Alternatively, let me know what you're looking for help with, and I'll see if I can create something that may be better suited to what you need.
@c4dropz126
6 жыл бұрын
i unliked u and unsubbed
@itz_lilaa
2 жыл бұрын
wtf
@c4dropz126
6 жыл бұрын
rubbish
@gmmobassir8044
2 жыл бұрын
Nice
@jeygenraam
2 жыл бұрын
Glad you enjoyed it or found it helpful, @Gm_mobassir! Be well!
Пікірлер: 62