Cheers mate. Feels like there's something new happening almost every week at this stage. 🙏😎
@MKMTA
Жыл бұрын
Please tell me Nas that you put a bit of paint on those drilled holes before you put the Reverts & hex screws back in ? it stops the rust getting in to the raw metal. Other than that looks like a great product 😁
@NasTimeAdventures
Жыл бұрын
No mate. Is silicon or paint better?
@trevwassanatravels5565
Жыл бұрын
Both
@MKMTA
Жыл бұрын
@@NasTimeAdventures paint in the holes to protect the raw metal. Once dry, you can use a bit of acid free silicone too.
@kevinwaters-marsh217
10 ай бұрын
Does paint need to be applied if it's an alloy tub? I didn't think alloy rusted. Steel yes, alloy no?
@jasonknox1926
Жыл бұрын
Definitely need to add a bit of rust protection to each of those hole you drilled into the tub! Think I’ll be getting one of those tanks next week
@NasTimeAdventures
Жыл бұрын
Sorted now. Thanks for the tip. 🙏
@LockyourHubs4WDing
Жыл бұрын
If you don't let the claret run, are you really doing a decent job of the project?
@NasTimeAdventures
Жыл бұрын
No doubt could have been improved 😂😂😂
@RAJULAMIC
8 ай бұрын
Awesome! Learnt of a 40L tank from Australia. How much is it to ship it to Kenya?
@NasTimeAdventures
8 ай бұрын
Have to chat to Pak OFFROAD.
@jesusblessthesecommentsamen
5 ай бұрын
Looks good but can never find one that fits navara d22 wheel arch just over 1 metre length between. I ended up getting the front runner 50 l the outlet is dodgy. Looked on there web sight no wheel arch dimensions only top, height and no price. Aussie owned is good God bless.
@Carvalhol10
7 ай бұрын
Hey mate how do u know the level of the water tank?!
@NasTimeAdventures
7 ай бұрын
I don't have a gauge or anything in there but there are after market methods to add it if you need. I may look into it at some point but not really an issue for me now. It's more water than I would normally carry. 🙏
@MrMakemestuff
Жыл бұрын
Hi great video. Seems like the audio in coming from the left side while wearing headphones. Just switch the audio to mono when editing.
@NasTimeAdventures
Жыл бұрын
Ahhh. You legend. Thanks heaps.
@MrMakemestuff
Жыл бұрын
@@NasTimeAdventures of course :)
@ottouring
Жыл бұрын
Hi Nas Add mother quality addition I’ve msg you via this channel Cheers Craig
@NasTimeAdventures
Жыл бұрын
Haven't seen anything yet mate. Need to be more specific. Alternatively, I mentioned my email address in the live stream. 🙏
@fatmanoverlanding
Жыл бұрын
It looks like you did a great job. Sits nice and centre. 👍I just hope you put a coat of paint on the holes you just drilled before you fitted the screws and the rivets on.
@NasTimeAdventures
Жыл бұрын
Nope. Looks like I'm going by back.
@kevinwaters-marsh217
10 ай бұрын
What if it's an alloy tray? Didn't think they rusted ?
@AmyOutdoors
Жыл бұрын
Nice one. Id have chosen thar one too... although the wheel arch one looks like something that would fit in my Challenger.
@NasTimeAdventures
Жыл бұрын
Can't go wrong with either I reckon. 🙏
@The_Spleener
6 ай бұрын
Great job mate, thanks for making this video. How did you attached the plates to the tub after you drilled the holes? Did you use a washer and bolt from underneath the car?
@NasTimeAdventures
6 ай бұрын
Cheers mate. I used self drilling screws. No nuts or bolts.
@The_Spleener
6 ай бұрын
Awesome. I’m looking at options how to secure a few things to the car and install more tie down points, this might be an option
@markhopkins9925
Жыл бұрын
Thanks Nas , Good review, the tank looks like a great addition for your 4wd. 👍🍻
@NasTimeAdventures
Жыл бұрын
I never thought I'd be this excited over a water tank. Looks great. 🙏😎
@itroy3039
Жыл бұрын
Great video mate 👍 How much did the tub tank cost 🤔
@NasTimeAdventures
Жыл бұрын
They retail around $400.
@kevinwaters-marsh217
10 ай бұрын
Nice installation for a non-tradie. Hope you like the tank
@NasTimeAdventures
10 ай бұрын
Cheers mate. Been really happy with it. I'm a lucky man. 🙏
Пікірлер: 40