Thanks for your setup video. I was finally able to turn off demo mode 👍👍 and set up my receiver in stereo mode with just two speakers in my man shed. Cheers!
@technoboy-allinOne
3 ай бұрын
Most welcome 🙏
@stevenljohnson867
Жыл бұрын
I picked up The Pioneer a 24 receiver from a thrift store didn't think it would be that much but I am now have a change of mine thank you very much for this video!!!
@B0bhissidekick
8 ай бұрын
Thx for the video, I've got the reciver a couple of years, now I know how to use it 😅
@ErnestBaez-j7b
6 ай бұрын
Thank you so much. I didn’t know I could do so much with this receiver. Thanks.
@gordonstevenson1266
11 ай бұрын
Thanks so much , your video is really easy to understand.
@bikerbil1
Ай бұрын
thank you for the video, you are the best
@ganapathysriram6506
3 ай бұрын
Thank you so much for this video.
@chrisedwards4694
15 күн бұрын
Great, detailed video. Do you have a video that shows me how program the remote to turn my TV on and off with the button in the upper, right TV Control portion?
@technoboy-allinOne
6 күн бұрын
Not that I know of. I will try and let you know
@Azdamar
Ай бұрын
Thank you very much bro, adamsın.👏👏
@ravichandiranht3047
7 ай бұрын
Sir very useful thanks
@fahadsaleem350
5 ай бұрын
Great sir
@TheMronelife
Жыл бұрын
Very useful and thank you mate 👍👍👍
@TheMronelife
Жыл бұрын
Could you please explain me how to use the analog microphone in this receiver? Thank you 👍
@siyandacele8579
Жыл бұрын
How's it ,my av receiver has been playing perfectly but now it not giving sound at all what might be a problem ?
@sridhark486
8 ай бұрын
Hi, I have same or similar Receiver. I followed the same steps you mentioned but not successful. I am trying to connect my Sony Bravia 55x80J model HDMI ARC Port to DVD / Game of the receiver and when I made HDMI->ARC - ON - then it is stopping audio from TV but it is not working in the Receiver. I thought cable problem, but even with the Digital / Fibre Optic Cable also, I am not able to make it work. It is same for all. Is anything I am missing. Please guide me.
@technoboy-allinOne
8 ай бұрын
Check the hdmi setting on the receiver. Dont select hdmi arc on the receiver. Thats different part. In the hdmi setting set audio to the amplifier option.
@McSyntax69
4 ай бұрын
Hey boss what do you know about the 4k pass-through I have the vsx-523-k and hook my firestick 4k up to the bd input and it never plays 4k video what am I doing wrong do you know?
@technoboy-allinOne
4 ай бұрын
Check if your HDMI cable support 4k
@over3466
Жыл бұрын
Hello, I have a vsx 422 receiver and i switched tvs, everything working as usual but when I used to have the other tv, once I turned on the tv it automatically turned on the receiver but now I have to manually turn on the receiver with each controller, is there a solution to turn on the receiver automatically once i turn the tv on ?
@technoboy-allinOne
Жыл бұрын
Yes. The tv must have hdmi ARC port. And you gotta set this function from the tv.
@doubts72
4 ай бұрын
Thanks
@DaddyChilllllllllll
7 ай бұрын
My audio auto switches basic on the media that’s playing. I set it to Dolby pl2 music but when a movie starts playing it switches to Dolby digital. Is this suppose to happen?
@technoboy-allinOne
7 ай бұрын
You have advance receiver which detect the source i think. Though its not suppose to happen. You try resetting it
@DaddyChilllllllllll
7 ай бұрын
@@technoboy-allinOne I reset it then followed your steps exactly. So I’m not sure why it’s auto-switching based on media. Really frustrating
@arthur7941
3 ай бұрын
I think the menu of the vsx-s510 is almost the same? This wil help me to set up that device. Thanx, great tutorial.
@technoboy-allinOne
3 ай бұрын
Hope so. Thanks a lot 🙏
@mikaelbiilmann6826
3 ай бұрын
I bought an even older Pioneer SC-LX 57 (from 2013), and can't get the signal from the AVR to my TV, which is not a smart tv. I put the high speed HDMI cable from Output 1 to any of the HDMI inputs on the TV, but can't get a connection. I wonder what I have to do to get a signal? Settings in the AVR? Which do I change?
@mikaelbiilmann6826
3 ай бұрын
I reset the avr to factory settings, and now I get a signal to the tv, but when I connect my bluray player it only plays in stereo. How to change to surround?
@technoboy-allinOne
3 ай бұрын
Setup the receiver all the way again. And set it to Dolby pl2 music
@mikaelbiilmann6826
3 ай бұрын
@@technoboy-allinOne Thanks, tried that and it worked.
@varden51
7 ай бұрын
Thanx! Very professional video. I have a Pioneer VSX923 - but when I pushed Home Meny I did not get any SP.Set. Is it another word on my model?
@technoboy-allinOne
7 ай бұрын
I guess not. Go deep. You will find Manual sp setup or something like that. Better use tv display
@welcometohell1926
4 ай бұрын
Hi, boss I have a problem with my vsx 519v all the speakers specially the bass make a buzzing sound and i connected with a phone and when i play the music all the speakers doesn't play simultaneously only play separately plz i need your help 💖🙏💐how to play all the speakers simultaneously waiting for your reply Thank you💐
@technoboy-allinOne
4 ай бұрын
Reset the receiver & set it up like this & check it out
@shakes307
2 ай бұрын
Can you make a video showing how to set up this to a smart tv with a HDMI please :(
@technoboy-allinOne
2 ай бұрын
kzitem.info/news/bejne/lI-Dk4J-e2qFlYI
@technoboy-allinOne
2 ай бұрын
You can check this video out. It's about HDMI arc connection with tv.
@sandipanm7245
Жыл бұрын
Great. Thanks
@williamlunn1175
Жыл бұрын
I just bought a Pioneer SC-1522-K AV Receiver off of eBay and it was working for a few hours other than I couldn’t figure out how to correctly set it up. I factory reset it and within a few hours it started blinking and saying UE22 and I don’t know what’s going on. I know absolutely nothing about home stereo equipment but I am addicted to buying speakers and other equipment now but I’m asking if you know anything about this error code flashing and if I can get it to work again I realized today how dumb I am because I couldn’t figure out how to set it up like you did on here
@technoboy-allinOne
Жыл бұрын
Its firmware upgrade problem. Follow the instruction on the manual & update the firmware. It will work
@benb1685
7 ай бұрын
When i got mine my sub didn't come with a way to connect it . Any suggestions on that it was just two wire like for a regular speaker.
@technoboy-allinOne
7 ай бұрын
Your receiver model and sub model???
@bricks312100
5 ай бұрын
You probably need a powered sub.
@Robert-ro5xp
4 ай бұрын
I am having trouble setting up system just for AM/FM can you give some suggestions?
@technoboy-allinOne
4 ай бұрын
never used am/fm on this thing. Used it just for theatrical movie experience. you can check the manual if you have or you can search online with the model .
@bricks312100
5 ай бұрын
You skipped over mono sound setting. Both channels should be on. You did have it set correctly.
@mistryman29
4 ай бұрын
hey mate, nice video, i been using this receiver over 4 years, n was working fine, just wanted to fine tune to get most and i came across your video, i changed all settings as per your video, but now i could only hear very hard bass sounds from my woofer, the softer and low bass sound has gone, its not as soothing sound as it used to be. I have 3 knobs on my woofer, volume, Xover and Phase, would you know what best to set on those 3 knobs? as Xover set in receiver is 80, what shud b the knob on sub woofer itself? or should i try any other settings in receiver? your response will be appreciated, thanks, fyi, I have Large Front, small centre, small surrounds and active sub
@technoboy-allinOne
3 ай бұрын
You need to adjust the xover knob. Either to the max or if it has pass through.
@mistryman29
3 ай бұрын
@@technoboy-allinOne its at max, with xover set to 80 in receiver
@joeretta4160
7 ай бұрын
Hello, my rear back/surround speakers stopped working. When I run the "test tone", they work fine but somehow I have disconnected them internally. They don't work on "cinema" or the "music" setting. (I have two front speakers, one subwoofer, one center, two back speakers and two rear. Everything works fine until recently. Please help!
@joeretta4160
7 ай бұрын
(VSX 1022)
@technoboy-allinOne
7 ай бұрын
Try reseting the receiver
@nielboxall6309
5 ай бұрын
Hi there, I've just been through all the steps to get my pioneer to work with my tv, and I have no sound!! Any help would be appreciated, many thanks 🙏 Niel
@technoboy-allinOne
5 ай бұрын
What is the source of audio. If it's the tv then the setup would be different
@christophervarela7699
4 ай бұрын
Did you turn on your hdmi arc?
@billydamanik4784
4 ай бұрын
Hi, can this receiver setup for 7.2.2 speakers, like dolby atmos setup? Thanks
@technoboy-allinOne
4 ай бұрын
It's a 5.1 receiver
@hometownrocker1
8 ай бұрын
thanks for the video. Can you do a video on setting up the wireless connection manually. My phone app doesn't find my vsx45 unit.
@technoboy-allinOne
8 ай бұрын
This set has some fault. I am waiting for it to be repaired. Once i get it, i will sure make video of wireless connection. Thanks man.
@hometownrocker1
8 ай бұрын
thanks. Let me know when you post the new video@@technoboy-allinOne
@bagi9310
4 ай бұрын
Hi, I have a problem. When I am watching something the audio stops for second and then come back. What can i do with it? Thanks
@technoboy-allinOne
4 ай бұрын
Reset the receiver & set it up again, see if the problem is solved
@haileyArevan7176
9 ай бұрын
Sir can you make a video for spk set up pioneer vsx -534 for all output spk@the back of amp panel..thanks
@technoboy-allinOne
9 ай бұрын
Sure i will try
@vStall
11 күн бұрын
Followed all these setting and now i feel like my sub dont really play
@technoboy-allinOne
11 күн бұрын
Place the sub at proper place & increase the level of it. If still low then you can increase the frequency to 80hz
@vStall
8 күн бұрын
@@technoboy-allinOne its not the placement. It dont play at all
@Vishal06
11 ай бұрын
Bro i have small problem in my pioneer vsx-325 My volume is limited to 65 it doesn't go up and before it goes up to 80 (max).. whats the setting to change it??
@technoboy-allinOne
11 ай бұрын
Set the max vol limit or reset the receiver
@Vishal06
11 ай бұрын
@@technoboy-allinOne I've resetted and it's fine now thank u
@seniors4kimi
Жыл бұрын
how and what should be the setting if i wan't all the speakers working, bcoz upon testing 5.1, the sound of the sorround speakers only comes out on the front speakers, but all speakers are working if i test it individually, pls help
@technoboy-allinOne
Жыл бұрын
Well the problem is not clear. Check this video & setup your receiver properly & set the volume level of each speaker according to the distance.
@edwinismail9401
Жыл бұрын
@@technoboy-allinOne how to get 5.1 Dolby surround because I still get 2 channel stereo
@santhoshkumar458
Жыл бұрын
Thanks for the detailed explanation. Pl explain how to enable Dts HD on VSX 524. My receiver is connected to MI TV HDMI ARC port and receiver operated source is TV and it is working perfect. The following KZitem (5.1 test, clips and Trailers) channel videos are not supported by receiver. Any solution for this?
@santhoshkumar458
Жыл бұрын
I did not feel the audio experience with this receiver.
@technoboy-allinOne
Жыл бұрын
Use the standerd surround button on remote & select dolby pl2 music. Turn panorama on. For better understanding check out my video on how to get the best out of a receiver..
@nathanmyers882
6 ай бұрын
When I push the button to select Dolby pro logic music that option isn’t there. It only says stereo.
@technoboy-allinOne
6 ай бұрын
Then you dont have all the speaker selected as 5.1
@user-cp4wg6rl7r
7 ай бұрын
7:20 Pioneer avr vsx-323 Audio test but sentrarcenter and surround speakers not working what's the reason, have any solution?
@technoboy-allinOne
7 ай бұрын
You may have set it to stereo mode. Change it to dolby pl2 movie or music.
@user-cp4wg6rl7r
7 ай бұрын
But I do the audio test and it didn't work either, have any technical problem?
@user-cp4wg6rl7r
7 ай бұрын
I have reset it,
@user-cp4wg6rl7r
7 ай бұрын
2:44 hi bro, answer pls
@khaledshawky2172
11 ай бұрын
can this be done without the remote control? I lost mine
@technoboy-allinOne
11 ай бұрын
Yes i guess.
@markchaney9042
17 күн бұрын
How do you set balance
@technoboy-allinOne
22 сағат бұрын
Between left & right? Set the left & right channel level to same db
@varun97wankhade
Жыл бұрын
I am not getting reset option on pressing that button
@technoboy-allinOne
Жыл бұрын
This trick works on few vsx models. If you have any older or advance model then this wouldnt work
@olliecaisip7639
Жыл бұрын
What about the use of the phones on the front.. Can you explain please
@technoboy-allinOne
Жыл бұрын
Mine is got a fault. And never used phones before. So i have to conmect & check it myself first. So untill i fix my receiver cant help you. Anyone know knows about this plz help this guy here.
@ScreamingReel500
Жыл бұрын
Headphone output. Not 'phono' which is in the back for turntable input.
@christophervarela7699
Жыл бұрын
My radio and blu-ray dvd plays all the speakers but when I try to listen to regular tv on surround sound, I get no sound.
@technoboy-allinOne
Жыл бұрын
How its connected
@christophervarela7699
Жыл бұрын
I'm using the arc slot with my hdmi cable.
@christophervarela7699
Жыл бұрын
I fixed it by watching a sony tv setup video. My sony tv wasn't in sync. It works fine now. Thanks.
@benardveasley9105
Жыл бұрын
How do I change the A to an H on the receiver
@civicek6260
Жыл бұрын
Pioneer vsx-329 have this function
@user-jf3bl2cm6t
10 ай бұрын
How to connect asbt200
@technoboy-allinOne
10 ай бұрын
There would be a proprietary connector at the back of the receiver. Its white colour wide port at the left side of the back panel
@user-cp4wg6rl7r
7 ай бұрын
Hi
@manogarann4697
Жыл бұрын
WHARE TO PUT ARC CABLE
@technoboy-allinOne
Жыл бұрын
Hdmi
@manogarann4697
Жыл бұрын
@@technoboy-allinOne okay sir input or output i am using pioneer vsx 524k this model, oneplus 32in android tv sir
@manogarann4697
Жыл бұрын
how to set arc
@technoboy-allinOne
Жыл бұрын
If you want your smart tv sound to the receiver then connect hdmi from tv arc port to receivers hdmi input port. For receiver turn on arc & for tv go to the sound setting & select hdmi arc as audio out .
@manogarann4697
Жыл бұрын
@@technoboy-allinOne okay thank you, will try
@kumarhemachandran9751
11 ай бұрын
How to connect usb
@technoboy-allinOne
10 ай бұрын
Simple plug n play, usb drive must contain songs only, no folder
@kumarhemachandran9751
10 ай бұрын
@@technoboy-allinOne one more help where to get spare remote
@technoboy-allinOne
10 ай бұрын
@@kumarhemachandran9751 search online or ask service centre
@bricks312100
5 ай бұрын
Make sure it says pioneer on the remote and dont bu from Lucky. Fake.
@pedroborges595
9 ай бұрын
Thank you so much was very useful /hug .
@edwinismail9401
Жыл бұрын
Thank you so much this is awesome
@edwinismail9401
Жыл бұрын
I have a question about how to make 5.1 Dolby Surround I only get 2 channels no actual 5.1 hence it is like stereo. Any suggestion to make it 5.1
@technoboy-allinOne
Жыл бұрын
All is shared in the video. Select properly
@edwinismail9401
Жыл бұрын
@@technoboy-allinOne yes i was able to do it thank you
Пікірлер: 126