Keep making these types of videos it helps walk thru for little experience!
@dirtracing1
4 жыл бұрын
I’ve installed this engine in my Apollo rfz x18 and runs perfectly thanks guys
@fredwinky12
3 ай бұрын
These guys are awesome to deal with. Customer service is top notch and communication is gold. I ordered this motor a few weeks ago and installed into my SSR125. Plug and Play! Started 2nd kick and after properly breaking in the motor, it rips!
@gordonpotts753
Жыл бұрын
Nice job. I appreciate the obvious honesty and integrity.
@Jazsft
5 жыл бұрын
Awesome vid guys still the most reliable engine I’ve ever used in the past never missed a beat literally put it thru hell my cousin done the same never even replace the factory oil :( but still lasted for years of punishment Please do a vid of the 146 and z40 upgrade and the power difference they make
@meganfitzgerald651
5 жыл бұрын
Love these types of videos. Very informative and when my apollo rfz 125 wears out this is the motor I'm anxiously wanting and been wanting to purchase
@vincetboltusa4917
5 жыл бұрын
Thanks man !!
@amanteapasionado6836
3 жыл бұрын
"Get the upgrade shifter, ya know, chick's dig it" 🤣🤣 hell yeah, I'm sold!
@davidwhite5858
3 жыл бұрын
I was ready to purchase a 125 Lifen engine for my Honda CT70 until I stumbled on to this channel with a Piranha 140 engine and the upgraded parts. Hope they have them in stock when I purchase.
@whiskeythrottletv8408
5 жыл бұрын
Great Stuff! I just bought one for my Apollo X18! Stoked about it cant wait. Thanks again guys keep it up!
@fatbuddycat
Жыл бұрын
These guys are super cool. I just installed their 3 inch extended swingarm and 330mm shocks on my z50.....amazing products!!
@connorssmallengines6663
3 жыл бұрын
I’m putting one of these on a ‘63 Honda cub 50. Old motors trashed but this ones gonna rip
@scotttalken8431
5 жыл бұрын
I believe I have bought 3 engines from you guys. Your awesome. I stayed away from a 140CC motor because my understanding is you having to have a oil cooler. Also I thought a 140CC motor is a bit longer and the motor could rub the front fender. Next motor I buy will be from you guys.
@vincetboltusa4917
5 жыл бұрын
The Piranha 140cc is 15mm longer at the head (just ove a 1/2 inch You do not need to run an oil cooler on Piranha 140cc
@justonovak8216
3 жыл бұрын
Excellent video very instructive. Thanks for all the data your guys show. 5 stars on this.
@The_Future_isnt_so_Bright
Жыл бұрын
I installed a 34mm carb on mine. took 2 years to tune it properly but it is a rocket now. Ive had to weld the kickstarter 3 times, but its fine now. I keep 2 cdi boxes side by side just in case I need em. The electrical , I use a full wave rectifier with a massive 2 farad capacitor running 24vdc. Led lights are the only thing that'll run that voltage. I welded a long steel bar with a small weight at the end over the rear wheel to eliminate that vibration at high rpm, wasn't intentional but it worked.
@Dirt1994x4
Жыл бұрын
Thank you so much for all the information. Awesome video you did a great job.
@geoffreyjones2000
4 жыл бұрын
Thanks Vince :) you rock sir
@minibikeaction4266
4 жыл бұрын
Please keep producing videos on your products and tec.
@upshiftclutchups665
4 жыл бұрын
My friend got one for his ssr 110. He let a friend of his ride it because he said he could. Well turns out he couldn't it was pinned in 1st gear hitting rev limiter for 15-20 secs and it still runs great to this day. Awesome engine.
@upshiftclutchups665
4 жыл бұрын
Oh and that was like 2 years ago
@silentlyfe3660
3 жыл бұрын
so it fits a ssr 110?
@IBOO57
2 жыл бұрын
They dont have a rev limiter afaik thats valve bounce.
@marvinstarr5984
2 жыл бұрын
@@silentlyfe3660 Yelp
@motleygarage420
4 жыл бұрын
epic i found your guys channel ive been ordering parts from you guys for yeaRS iam saving up for a 190 motor for my tao tao hellcat 125 i blew out the shift point cant get it out of gear and when i order the bike it came with a oil leek so new motor save up time epic video !
@aleemrahim6846
3 жыл бұрын
140cc and 190cc engines have the same dimensions ?
@Brad_Jenkins
8 ай бұрын
I'm going to convert my 1981 CT70 to this engine!
@chevybrat
5 жыл бұрын
Nice presentation!
@Gerald07
6 ай бұрын
I Love This engine from phillipines
@tylerswift6683
5 жыл бұрын
super helpful definitely getting one
@jamesjohnson9833
3 жыл бұрын
Great shop Engines are perfect when done by T-Bolt USA
@daytona6363
5 жыл бұрын
Very good and informative video , good stuff .
@vincetboltusa4917
5 жыл бұрын
Thanks man !!
@MostlyPeacefulCombatVet
4 жыл бұрын
I stumbled across this video while looking for some upgrades for my girls little 125cc (120cc actual) ATV. I don't even have a pit bike, but want this motor! I don't think my 8 year old daughter would appreciate losing her electric start, reverse, and automatic on her little Midsize quad though.. But Daddy would have a blast! 🤘😂 New subscriber. Thanks for the video, I liked it and the presentation and knowledge is great.. I like all things with motors, and making them better and faster....We will get along. haha 👍 Take care y'all
@AkOverload
Жыл бұрын
Thank you it answered my question
@Smallbore2wheels
5 жыл бұрын
thanks for the very in depth video
@vincetboltusa4917
4 жыл бұрын
Thanks for watching
@snowst400
4 жыл бұрын
Wow I’m just blown away u guys are number 1
@kmx509
2 жыл бұрын
EDIT: Sorry we were idiots and figured out the major issue on forums. Turns out Lifan motors require people to buy an oil cooler and we didnt get one nor be told we needed one. Motor still runs but we put assembly lube in there for now. We are going to get a new head and get an oil cooler. Sorry for the waste of time. Hey, im back with a more serious question. I got my motor and the clutch is better but we opened the cam area up to adjust the valves. We did them and the exhaust valve was really loose. We got that done and we opened cam cover and it was BONE dry. We looked at the cam and it was so dry it was grinded down atleast a millimeter. We are thinking it was the oil pump??? Please give us your opinion on what happend.
@skydenfukunag8241
6 ай бұрын
More please😂❤
@WorksForMeBro
4 жыл бұрын
Very helpful video gentlemen. Thank you.
@Stevesbc406zz
2 жыл бұрын
Hey guy thanx great vid thumbs up
@ronaldclark7373
2 жыл бұрын
Brilliant video, I have a CWR 140 it’s a fantastic and very fast bike in my little monkey bike.
@robertshrum5209
3 ай бұрын
Tbolt USA Rocks I can't wait to upgrade my Laser 6 moped just not sure what route to start
@jordanward473
Жыл бұрын
goiod video very goopd ionformation,chers guys
@patty2Strk
2 жыл бұрын
Apollo rxf (yx)140cc open 14/12 With 97hrs on it I'm 280lbs thing is just a monster !
@mattDIY
2 жыл бұрын
Good job 💐💐💐 good luck
@user-Merovingian1980
5 ай бұрын
i hope your both still alive great video
@hashtag_moto_
5 жыл бұрын
Very informative video thank you you guys are great
@williamcullum6676
5 жыл бұрын
Great Video!!!
@vincetboltusa4917
4 жыл бұрын
Thank you !!
@peddeler2
4 жыл бұрын
I bought two Piranha 125cc engines from Tbolt for my 1991 and 1992 ct70s. Very similar to the 140cc engines. If you are installing these on a 91 thru 94 CT70, the cool thing is that the stock stator plate from the original 72cc engine is interchangeable with that stator plate for the Piranha engine. Swap the stator plates and it becomes plug and play, no need to modify the wiring. Im running mine with all the stock Honda electronics with no issues. There is no lead for the neutral light though. This was for the 125cc piranha, I believe its the same for the 140cc kzitem.info/news/bejne/y32it3-JamN0Zoo
@jevinhauke974
Жыл бұрын
Ink lp00 90cc 8 m 987pjl lol jl pl k9😅you 7😅009p0 p 000😮p it m is m😅p😅looked ikn,kiln, 7j on map p 0p😊01 2😮op😢05p565p09 I I'm😢😮0ex 01 250ex 7kp😢😢😮😢4p0809 pl00p5555555555 p0650
@scottcooper1004
Жыл бұрын
Wish you guys to do a video on that same motor for 140 piranha but show us how to hook up our lights and make sure battery stays charged. That’s a huge problem with these engines
@damorej416
4 жыл бұрын
I have a 2012 pirahna with a yx140 engine. I race it quite a bit and run it hard everytime I ride it and she starts up without a problem everytime. I’ve recommended piranha bikes to tons of my buddy’s and recently sold my 12 because I purchased a 18 with the 12&14”wheels. One thing I noticed is my 12 had the oil cooler on it. Wondering if this is a good option for these newer bikes or do you think it’s not necessary?
@remi009340
2 жыл бұрын
My Lifan style 125 is shot and TBoltUSA isn't shipping Piranha 140's to Canada now because of COVID? 😩😩😩 My poor CT70 needs love!!!
@eliveiak1089
5 жыл бұрын
Just ordered a pull starter from you guys today(Friday) before 4pm est, and I bought priority shipping. Should I get my pull starter by Sunday?
@enricomashall7498
4 жыл бұрын
I love this video, I have a honda cub 90cc, and I'm interested in getting one of these 140cc engine with the full setup that's why you're in and everything, I would like to make contact with you guys.
@ErikSutphinPhotography
3 жыл бұрын
I'm doing the same swap just got my engine today
@brian636
Жыл бұрын
🫡
@user-Merovingian1980
5 ай бұрын
solid engine the yx140 but bare in mind they can be a bitch to start even set up right don't just kick it make sure to go past the tdc before trying to kick they will strip kick start gears otherwise
@oogie-boogie
5 жыл бұрын
you dont have a prob on a honda 50,,,with the head of the motor hitting the front tire?,,i have a lafin 140 and its verry close to the front tire on my bike
@vincetboltusa4917
5 жыл бұрын
The Piranha 140cc is 15mm longer at the head (just ove a 1/2 inch
@JboneApocolypz
2 жыл бұрын
is this good for SSR Pit Bikes? Great video thanks for taking the time to make it.
@hybridEP3
3 жыл бұрын
Anyone running a v2 head on this motor? I bet it would be ridiculous on a crf50
@KFLY67
2 жыл бұрын
Hey are you guys based out fo Portland, oregon?
@prestongriffin416
8 ай бұрын
will it be good for a honda trail bike step threw 1963 c105 will it fit i do trail riding off road steep hills thank you Preston
@frankminneci2966
8 ай бұрын
After break in can I use synthetic oil
@TBoltUSA
8 ай бұрын
After break in synthetic should be fine
@MrAlexander137
4 жыл бұрын
What’s better a Daytona or Piranha 140?
@pitgroove.37_66
3 жыл бұрын
If it's sheer power and torque that you want, DAYTONA all the way! If it's fun and versatility that you need, then maybe the piranha 140 is the better route
@bobbykately9621
4 ай бұрын
So what are the benfits with the trc ez-start performance cdi exactly? I know u said kickback but is there any other way to correct that or only the cdi box?
@94julius84
4 жыл бұрын
I do not have the ground connection to connect to frame I have the plug ins from the stator. Should I just plug in the ground from the stator and cdi together or bolt them to frame?
@gmoney4797
3 жыл бұрын
Looking to put one of these in a 1980 Honda C70. Will it fit without modification? The bike is 6v but I plan on completely rewiring.
@matryan3532
Жыл бұрын
I have an SSR SR110. I know this engine will fit my bike, but I’m curious if my pro circuit T4 will bolt up?
@brandoneckland6668
7 ай бұрын
where do you find the tank spacers at? i want to put one of these motors in my xr50
@cadeblain2265
7 ай бұрын
Do you have any videos on the pitster pro 140cc semi auto ??
@Tuckem2STOGS
3 жыл бұрын
I like to break them in with rotella t4 high in zinc
@JimmyGangi
3 жыл бұрын
When will these be back in stock!?!? Can’t find them anywhere
@aleemrahim6846
3 жыл бұрын
This will fit in Apollo 125cc from no problem no modifications?
@timrr2010
4 жыл бұрын
Will you get anymore of these or have they been replaced by the electric start version? I noticed they are sold out on your site
@TBoltUSA
4 жыл бұрын
Mass layoffs + Stimulus Checks = sold out engines I'm positive that we will get more piranha 140s in the future. but within a few months and entire years worth of engine sold out. The supply chains were never ready for this.
@robertmacias4690
3 жыл бұрын
Do you have a video on how to wire up lights for a 140 piranha?
@prestongriffin416
8 ай бұрын
add on can you get it in semi automatic?
@mlow587
4 жыл бұрын
What kind of Hp can I expect from this 140cc ?
@monkeyfool4532
4 жыл бұрын
M Low 12 HP is what I’ve heard
@twinturbo3470
3 жыл бұрын
why does the kit come with 2 carburetor heat spacers?
@kerm9807
3 жыл бұрын
Dear Team Have you tried a 26mm Nibbi carburetor on a 140cc?
@karlvalem
2 жыл бұрын
Hi! Can you answer my question please!! Does it fit into YCF 125 2013
@alvarocerritos
5 жыл бұрын
Will 10W-40 FULL synthetic work on pit bike engines?
@vincetboltusa4917
5 жыл бұрын
Not at break in especially We Never suggest synthetic ever
@alvarocerritos
5 жыл бұрын
@@vincetboltusa4917 what does NON synthetic do compared to FULL synthetic?
@TBoltUSA
5 жыл бұрын
We should just never using synthetic during break-in, it's been known to cause the cylinder to be glazed, The rings don't see properly, And your engine will more likely smoke. also your clutch may slip with synthetic as this is a wet clutch engine.
@alvarocerritos
5 жыл бұрын
@@TBoltUSA even with a yx150 klx-style engine that I'm getting?
@m3rkinfiniteofwgkta
2 жыл бұрын
Could i put one of these on a honda z50?
@VDM32
Жыл бұрын
Does this yx 140cc come with the z40 racing cam?
@jaybankz6302
4 жыл бұрын
So the two yellow don’t connect with nun
@squirrelmodelkits8499
Жыл бұрын
will it fit in a jr 50
@zachangelo7670
4 жыл бұрын
my 140 ran great for about year and a half. now it starts for about 3 seconds and dies and wont start again but will just repeat exactly the same thing and flood itself.. any ideas?
@cameronb9862
4 жыл бұрын
Take apart carb and clean it
@kmx509
3 жыл бұрын
Hey, got a serious question and i hope you guys can answer it. I Recently bought a Lifan 140 (im hoping they are similar) And when we got it in we realized the clutch is EXTREMELY hard, if you got any answers let me know immediately!
@TBoltUSA
3 жыл бұрын
First thoughts are it might need some break time to let the plates get lubed up better. I'd suggest emailing contact@tboltusa.com dad might have a better idea. -jr
@kmx509
3 жыл бұрын
@@TBoltUSA Yeah, i figured. We got the engine into our quad and we pulled the clutch in and we were confused. I Rode it around and broke it in, the clutch felt a little better but we will see. Thanks!
@Markonacr250r
11 ай бұрын
Will a regular aftermarket cdi box work? The same as the one in the video?
@user-Merovingian1980
5 ай бұрын
yeap
@anthonylongoria5917
4 жыл бұрын
Would it fit a cfr 50 style frame looks identical
@TBoltUSA
4 жыл бұрын
Yep. That's one of the most common applications!
@robberman6403
4 жыл бұрын
can you guys do a install video that would be sick!
@TBoltUSA
4 жыл бұрын
We have a basic engine install video: kzitem.info/news/bejne/pWqh12aObGeZd5w
@grilledtomato5499
2 жыл бұрын
What size front sprocket comes in this motor
@makoafonoimoana9917
3 жыл бұрын
Could this fit on a taotao dbx1 and if so, how would I do that?
@frankminneci2966
8 ай бұрын
Where are these made ? USA ?
@jered2177
3 жыл бұрын
Good engine for swap in a kymco k pipe?
@MrAlexander137
4 жыл бұрын
Do you guys ship to the UK?
@jevinhauke974
Жыл бұрын
Does the dial.adjust the rev?
@sickduck66
4 жыл бұрын
Second question. I have a cr125 mount on my kart will this fit?
@D-Day-fb3pw
4 жыл бұрын
Awesome! How much is it? Base price, No extras...
@dirtracing1
4 жыл бұрын
mike harmon I paid $480 or $500 for mine
@sickduck66
4 жыл бұрын
I had a question I'm making a go kart and I was thinking about useing a Piranha 140cc 4 speed. I'm not trying to race just somthing to have fun on for not super expensive. Is this a good little engine? I'm 200lb will it be strong enough to push me
@MACKTOP666
4 жыл бұрын
That engine is around 11 whp a stock gokart is around 7-9hp hp to the crank and had no transmission. The piranha 140cc is about twice de Power and you Gotta have 4 speed. Its gonna rip
@sickduck66
4 жыл бұрын
@@MACKTOP666 it's crazy that you just sent me this reply because I'm seriously debating on ordering this engine right now as I'm typing this. It's in the shopping kart
@inkcapblack
3 жыл бұрын
Does anyone know where this engine is manufactured
@st.paulmn9159
3 жыл бұрын
Replace my 2018 coolster m-125? 42 mph. I want 65.
@G-Boyz.Outside
4 жыл бұрын
I would like to put the 160 in my 50
@awaisekhan9919
3 жыл бұрын
Sir what is its price please
@mocomoto8951
4 жыл бұрын
Anybody put this on an xr70? if so did the stock exhaust seem to hold the engine back so much that you got an aftermarket pipe?
@TBoltUSA
4 жыл бұрын
We've had tons of guys put the piranha 140 in an XR70. many of them use the stock exhaust and then get it aftermarket pipe a couple months later. The stock pipe keeps it a lot quieter but an aftermarket pipe definitely improves performance
@anthonyspadaro7731
3 жыл бұрын
I have a spare Piranha 140 I want to put into a 1988 Z50r. Do I need the tank spacer kit for that as well or does that only apply to the CRF50?
@NasdaqManiac
2 жыл бұрын
Hey Anthony did you ever figure out your question? I'm in the same situation
@anthonyspadaro7731
2 жыл бұрын
@@NasdaqManiac I swapped the 140 in and it went in just fine. The only issue I had was the petcock for the gas tank is right where the carb sits. I had to get creative and extend the manifold a bit to push the carb rearward of the petcock. other than that, it was a super easy swap.
Пікірлер: 160