Hello! I watched a lot of videos on the subject. I do not speak English well. Your video can also be used without sound. The best! Thanks! Cheers!
@shiloh6627
Жыл бұрын
Clean and quick maintence instructional, would love see more mate!
@fredrik1611
6 жыл бұрын
Make more Of vidoes like this. Its Nice to have when you are a beginner in this 🤙🏻🤙🏻🤙🏻
@steviefix6870
3 жыл бұрын
Your a star! Easy and well explained. Who’s disliking this video seriously!
@motormax6048
2 жыл бұрын
Because he adjusted the valves on the fire mark rather then top dead centre
@motormax6048
2 жыл бұрын
Because he adjusted the valves on the fire mark rather then top dead centre
@broncobill861
4 жыл бұрын
Cheers lad helped me confidently adjust my valve clearances 👌
@jamiewilson7733
4 жыл бұрын
Tryed this sound like a can of nails! inlet 0.02 exhaust 0.03/4 bikes perfect 👌🏽
@sorbend9480
4 жыл бұрын
What ccm
@motormax6048
2 жыл бұрын
I went with 5thou outlet and 4thou inlet adjusted from cold 6thou for outlet makes them tap and sound like shit
@brandnew8879
6 жыл бұрын
He is wrong for the timing chain, need set at T line, not F line🤔
@gavinmcvey8177
5 жыл бұрын
Mine is a yx140z2 my cam plate is different from his that's a old skool flywheel
@gavinmcvey8177
4 жыл бұрын
That is a yx gen 2 engine the first generation yx 140 had two sprocket bolts😎🇬🇧
@high_lyfe8546
3 жыл бұрын
Mine is a first gen yx140
@scottmadden950
7 жыл бұрын
awesome video mate best one ive seen by far
@crcmoto3751
7 жыл бұрын
Scott Madden I agree! thanks!
@QuantumMotorWorks
8 жыл бұрын
thanks for the video. professional....definitely need those intake and exhaust valve clearances. Thanks!
@motormax6048
2 жыл бұрын
Don’t adjust them to fire on the flywheel u want to set them at top dead centre
@benhelmuth9129
8 жыл бұрын
This backing track is SICK!!!
@karltravis8419
3 жыл бұрын
Best video on KZitem thanks
@SamiAnderson
9 жыл бұрын
good work on the vid and thanks for sharing for the rest of us mate.
@waiguolaoshi7231
8 жыл бұрын
Thank you from UStralia brother
@jamiewhitfield4498
11 жыл бұрын
Thank you very much very helpful some idiot had totally set them well wrong before I got the bike.
@wolverhamptonbiker2132
7 жыл бұрын
damn thats a clean bike. well looked after
@gavinmcvey8177
4 жыл бұрын
Mate that's a demo bike they sell everything you need to build your own bike from ground up 🇬🇧🇬🇧
@Yama-kid187
Жыл бұрын
Please do a video on how to set your carb up and adjust the airflow/idle screws. Can't find a decent video to explain it properly. More maintenance videos PLEASE
@np2185
8 жыл бұрын
Excellent video! Very well done and very helpful!
@Pitter_crewzz
11 ай бұрын
What are the tappet adjustment mm clearance on the z155 160cc
@mtbridingog9083
7 жыл бұрын
i have a question if i can her a little bit of tapping from my engine can i do this to stop it from make a straight noise like i think its the rod a little bit
@CRUMBIKERS12
10 жыл бұрын
@Dean Evs Yes it does my oil out bike just stalled when I was riding in a field and just would not start what I did to get it working back to its full potential was remove all the petrol and all of the engine oil, remove the carb and clean it out with white spirit, put the carb back together after clean and add back on to the bike, I then removed the spark plug and cleaned that with petrol and cleaned inside the hole, I then followed this guide to adjusting the tappets as shown in the video I then fitted everything back together and the bike started and went better than ever :)
@jay7264
7 жыл бұрын
you do not need to remove the stator cover or cam sprocket cover either. just remove both valve covers and spark plug. then kick over the engine until one valve opens then udjust the opposite valve.
@wmurphy1979
6 жыл бұрын
jay7264 its very important that the bikes at tdc but u r right no need to take off cam sprocket cover just fly wheel needed also that bike must have been new and dry cause if the correct amount of oil was in it when he took off exhaust valve cover itd have pissed out
@Dav37558
7 ай бұрын
Can be done with the gear lever still on just done it push it down out of the way
@user-dv8yn6hu8q
Ай бұрын
Why did you set it on the f mark? I was told the t mark! T is tdc? F is for when it the fly wheel tells the bike to fire? I'm confused more? Am I as per usual over thinking it just my bike has the f and t?🙇🙇🙇
@ipwnxdemonzz4223
5 ай бұрын
My pit bike takes ages to start when cold do I need to do this ?
@hty7167
8 жыл бұрын
Very inaccurate. 0.04 and 0.06 will make your motor tick like a time bomb. Always go 0.02 or 0.03 like Honda did.
@gavinmcvey8177
4 жыл бұрын
That engine is different than a Honda cub engines cam timing is well different stomp use the z140cam higher lobes big valves he's going on the service manual from stomp if you check out the kayo website that is the manufacturer of stomp pit bike frames stomp get yx engine manufacturer to put a w racing brand cam in to it at the factory with stiffer springs and retainers basically the engines are race engines not standard by any means his engine is second generation yx engine you have 123 generation engines different years of production mate I checked with mine and mine has f,t on the flywheel t is spot on with the timing on the flywheel and cam but it is set at what he's talking about and mine is nearly brand new aswel
@katluke
Жыл бұрын
@@gavinmcvey8177 So when I set the timing do I use the F mark or the T mark on the flywheel as mine also has both markings ? Thanks for your time . 👍🏻
@shawnlibby675
Жыл бұрын
Times have changed so it depends on the company and motor design
@JonesYHF
Жыл бұрын
@@katluke T
@djhewecko123
6 ай бұрын
i thought that
@amandaonderko637
4 жыл бұрын
I respect the background music
@leesmith4634
6 жыл бұрын
Would you be able to do a top end rebuild on a yx 140. There are loads about but just to make sure we all do it the right way. Great video btw
@dubsquad1075
Жыл бұрын
What do u mean by the line closets to the lair I have a T mark and an F mark
@asapferbs8813
3 жыл бұрын
Yo this video help a lot. Thanks !
@Nevinhattle
5 ай бұрын
Do I need to drain oil first?
@636moudy
3 жыл бұрын
Very professional video with great advice, cheers mate!
@henrychuong2699
10 жыл бұрын
My fly wheel marking doesn't match the marking on the cam sprocket. help?!
@mrkennethporter
Жыл бұрын
What are the torque specs on the engine covers?
@benpeach6706
7 жыл бұрын
I have a stomp 140 and I was wondering if you are able to just turn the flywheel or do you use the kickstart?
@ulysees08
4 жыл бұрын
If in gear I would imagine you can just rotate the rear wheel.
@filipkawulok4309
4 жыл бұрын
It's nonsense! when adjusting the valve clearances, the motor must rotate to the T position, I adjust the clearances IN 0.05mm and EX 0.05mm, when using IN 0.10mm and EX 0.15mm the valve tappets are knocking jackhammer ! I apologize for any mistakes in English I'm from the Czech Republic
@shabibajwa9816
5 жыл бұрын
Awesome video👍 keep it up mate
@samirbomen6056
6 жыл бұрын
عمل روعة جيد صديق كيف تركب تلك القطعة لتبريد الزيت وشكرا لك كثيرا انك مبدع
@dubsquad1075
Жыл бұрын
I have 4 lines on my fly wheel I have 2 unmarked 1 with F and 1 with T in that order anyone know which one I line up with the fly wheel marker
@samirbomen6056
6 жыл бұрын
عمل رائع جدا اخي لو سمحت ان تعمل فيديو كيف نعمل تلك مبرد الزيت وشكرا لك كثيرا
@hazr4139
11 жыл бұрын
means its in gear if the bikes started and the back wheel is locked, the wheel will only move once the bikes running if thats what you mean?
@BadPanda5
9 жыл бұрын
What is the song called?
@tomtom7776666
5 жыл бұрын
Is it the same for a demonx 170 xlr2 thanks
@thecrazymanfromireland
6 жыл бұрын
Super video thanks for sharing
@spambunny123
4 жыл бұрын
This needs updating badly for your newer bikes!!!
@speedyboi349
3 жыл бұрын
Looks like a very nice vid I never have done this myself but i have seen it and its very similar to what i saw Great vid bro🤘
@gamercat7004
8 жыл бұрын
hello my pitbike has a problem with a oil leak on my spark plug tip inside it shuts down while riding and downshift a gear and I think it shouldn't be doing that it. would be great if u can help me with this I haven't ridden it for a long time
@deancottrell3978
9 жыл бұрын
Hi guys I was just wondering if you could do a video on how to install a quarter twist throttle?
@wibisk7175
7 жыл бұрын
that is honda c 100 engine. legendary engine.
@Dirtbikeboy557
11 жыл бұрын
What does setting the timing mean does it have to do with the idleing ir the bike
@ulysees08
4 жыл бұрын
Matching the rotation of the crank/movement of pistons to the valve movement. The tappet clearance is to allow for heat expansion.
@Jack-ns5zc
2 жыл бұрын
Will these need to be set the same for a 125
@Mr10usdad
2 жыл бұрын
What if the cam is lined up but the flywheel is not?
@joeythomas1373
2 жыл бұрын
Then your timing is out
@jamofalltrades9527
6 жыл бұрын
grate video thanks
@lespaulplayer23
3 жыл бұрын
Sounds like a dumb novice question but when you are lining up the marks on the flywheel and the casing, which mark on the flywheel do you line up as there are several including a "T" and an "F" along with a few other marks. I'm new to all this and just want to broaden my knowledge. Thanks 😁👍🏼
@maxer1694
2 жыл бұрын
T
@alexanderclifton3385
4 ай бұрын
Ignore what he said line it up with the t
@cricketol
4 жыл бұрын
if you dont set them right can there be some popping ?
@henrychuong2699
11 жыл бұрын
my cam sprocket and flywheel don't line up together, if the flywheel is aligned with the engine marking then the cam isn't and vice versa. is this a problem, if so how do i fix it?
@jameshalford4699
3 жыл бұрын
Did u solve it
@ianlatta5308
3 жыл бұрын
You should remove this video you have set the timing to fire instead of top dead centre
@k-editions7289
3 жыл бұрын
that’s what i thought haha
@mw2freak613
11 жыл бұрын
Hey guys I have a 125 Loncin pit bike and the rear caliper locked up on the disc and now it will only go backwards and then my dad thought it might need brake fluid but we put somem
@AusModernGaming
Жыл бұрын
Perfect!
@high_lyfe8546
3 жыл бұрын
Anyone know how to set the cam mines popped out? Do I gave to adjust the tappets to install cam back in
@dasiliahuyler6684
7 жыл бұрын
Hey my car engine is running lil rough/Shaking n turning off and making a tapping noise do u think it could be my tappets that's making it run rough n turn off
@odegardracing
8 жыл бұрын
i have a ssr110 would the work the same way you did yours
@mtbridingog9083
6 жыл бұрын
Can i use the same measurements in the fillers you used im saying can i used the same 1s you used in this video
@mtbridingog9083
6 жыл бұрын
I have a 125cc pitbike engine
@MRONETEN
Жыл бұрын
will those settings work on a YX110 mate?
@deano386
10 жыл бұрын
would this stop a pitbike from starting?
@Y0UP4
2 жыл бұрын
is this a yx 140cc engine?
@static20010
8 жыл бұрын
U know where I can get part for my pitbike. I have a 125cc apollo
@karlshirley1405
9 жыл бұрын
Hi i have a 110cc semi auto pitbike have changed the piston and rings has got spark but won't run any ideas to try
@user-dc9qb9oh5x
9 жыл бұрын
Have you tested for spark by putting in against the engine?
@JondavKTM
9 жыл бұрын
Blocked pilot jet? Clean carb out to start with. Check idle speed adjustment and air/fuel mixture screw. Turn it all way in till very lightly seats an then come back out 1.5 or 2 turns, the bike will now run to then be able to adjust precisely by listening to the engine.
@speedtoast
11 жыл бұрын
Hi do you know if its the same for yx160 motor? Great vid
@111jkjk
2 жыл бұрын
Barely need to remove anything and no shims. I wish all bikes where this simple to adjust
@paulmenzies9067
2 жыл бұрын
Hi mate got a m2r 140 done a top end rebuild put it all back together new gaskets set timing as soon as I do head bolts up engine will only turn half way in both directions then have a banging sound if I undo the head bolts it spins fine any ideas.
@paulthemachinst6545
Жыл бұрын
Timing is set wrong. Valves are hitting piston.
@TheJameshemsley
9 жыл бұрын
i have a 150cc chinese bike and i have no idea what the clearences need to be!?!?
@Rubensolanogo
9 жыл бұрын
does someone know where to found the AGB 29 user manual? I need to regulates the tappets but I don't have the necessary specifications...
@qureshiautosofficial
7 жыл бұрын
Ruben Solano give me manual on my email nabeelahme0786@gmail.com
@omarmontana1969
3 жыл бұрын
i need a orion agb 37 crf1 manual mate
@RUBITOFF
6 жыл бұрын
Will this be the same on 125 lit bike
@mizrrainbernal460
10 жыл бұрын
I have a ssr 125 by chance do you know the valve clearence
@toddmiller1933
8 жыл бұрын
Hi can you tell me the tappet clearance for a demon x 160 please
@everthingoutdoors8181
4 жыл бұрын
I dent in my bike to get this fixed and it came back even worse and barely starting anyone have tips so I dont fuck it up
@mtbridingog9083
7 жыл бұрын
my bike has a lost of power the other day i was riding in 3 rd and she tried to lock up and theni shifted into 4th and she cut off im not sure why i changed the oil out but it was brand new and i refilled with newer oil and still had the same problem the bike smokes like a 2 stroke and its a 4 stroke it wont reach full not even half rpms and i changed the spark plug because it was black but im gonna take it apart maybe today to see whats up with it because she has never acted this way its an 4 month old bike and she just started acting like this yesterday
@jimmywhitlow7174
4 жыл бұрын
It might have too much oil in it or it needs new rings.
@mtbridingog9083
4 жыл бұрын
@@jimmywhitlow7174 it was the stupid timing chain ..
@connorwilson8078
7 ай бұрын
Gasket failure gaskets are cheap, could be piston ring , cheap fix 😊
@benlawton5420
7 жыл бұрын
I do this until i feel some resistance but it still makes a ticking noise from the head but all the vids I watch of the z40 140 make the noise.
@mototommy5525
3 жыл бұрын
No engine is silent
@robertlongley6115
Жыл бұрын
When and how do you know if they need adjusted
@graveysnipes350
7 жыл бұрын
What do I set a 125cc pit pro tappets tk
@zahidimoad4689
10 жыл бұрын
can I use 0.1 et 0.5 for dirt bike 125cc help pleazzzzzzzzz
@zahi9460
5 жыл бұрын
Thankyou
@LSSWAPIT1978
7 жыл бұрын
Was that motor a piranha 140?
@afkgang5076
3 жыл бұрын
I didn't do nun of tht kust the valve if its timed its timed
@TheManCaveMetalFab2580
Жыл бұрын
Your timing mark looks like an F for firing that can be confusing because you definitely do not want to get T for timing and F for firing confused🤔
@insidegamzzz3902
10 жыл бұрын
i have a stomp demon x 125cc this helped
@greenstomp7695
9 жыл бұрын
what problems were you getting for you to adjust them mate, gonna do mine Saturday...... mines just overheating and being a bitch to start :L
@insidegamzzz3902
9 жыл бұрын
the carb and tappets
@insidegamzzz3902
9 жыл бұрын
hard to start
@greenstomp7695
9 жыл бұрын
did it keep cuttig out after like 45min riding and donst start for like 3 hours its the offroad stomp i have thts doing it
@Morcego538
7 жыл бұрын
wht is the valve clerance for my pitboke terra-moto 125cc? does this measurements fit all pit bike cc??
@jameshalford4699
3 жыл бұрын
Did u ever find out mate
@Morcego538
3 жыл бұрын
No, I ended up not tuning the valves the bike is waiting for new parts, but wen I do I will come back and tell you. You own a terra-moto pit bike too?
@jameshalford4699
3 жыл бұрын
@@Morcego538 i own a kxd125 but i tuned the valves to .004 .006 like stated in this video but its doesnt sound right, but it ran fine no issues so i upgraded my carb from pz19 to the 26mm one and now it runs terrible so iv ordered another pz19 brand new carb
@Morcego538
3 жыл бұрын
@@jameshalford4699 Maybe a 26 mm carb is to big for yours to much air intake, but I now that wen you install a bigger carb you need to change the jet screw to a bigger one, and install a bigger filter too, to let more air intake and more gas, mine is running on a mikuni 24 mm it’s the one that came from stock with her and an airfilter that looks like a UNI filter but I’m not sure if it is really a UNI, and it works really good alot of power, and makes a really good sound. There are carburetor kits that come with all this parts you need to change, the jet and all that.
@jameshalford4699
3 жыл бұрын
@@Morcego538 i wasnt bothered about power mate im happy with it standard as i only use it for stunting in the car park i needed a new air filter so it was only like a extra £10 for a bigger carb so i thought id try it so i jusy ordered another pz19 which is the standard i beleive
@salami99
9 жыл бұрын
welcome to pit bike . rekt
@LifeOnTheRoadNoFixedAbode
5 жыл бұрын
could really do with the same sticker set thats on this bike for my crf70 demon x d link 125 and i cant find them anywhere , could you point me in the right direction please, would be very much appreciated
@alexscott5990
Жыл бұрын
There is no crf70 dlink
@toddmiller1933
8 жыл бұрын
Hi can you please help me with my demon 160x tappet clearance I need for it plz :)
@parlixsoul5331
7 жыл бұрын
how did you make that stand?
@spyropyro3159
5 жыл бұрын
My manual for my ycf sp2 150cc says 0.10 on both intake and exhaust??
@ernstl5682
5 жыл бұрын
Then do so if its in the manual just do it
@johndoherty8681
9 жыл бұрын
hi there can i run a 125cc piston barrel on a 110cc valve head and can i use a 140 valve head on the 125 piston barrel thanks for any infio on this
@AndreaPaesetti
3 жыл бұрын
Which torque you’re using to close valve cover and flywheel cover?
@dazb3349
2 жыл бұрын
180nm 😄
@danielkerr4100
2 жыл бұрын
just tighten it until you cant lmfao
@Kwtints
11 ай бұрын
.006 for both intake and exhaust
@dannyblack8704
4 жыл бұрын
My vavles are too tight can not even put feeler underneath. Help !!!
@sylvainitsjustsyl4549
3 жыл бұрын
Well you got to open them first so you can get the feelergauges in and then you tighten the adjustment,🤦♂️just use your common sense man
@kacper3501
6 жыл бұрын
valve clearance in 0.10 ex 0.15 or maybe in 0.10 ex 0.10?
@mohammadjawadrezaee9694
2 жыл бұрын
Hello everyone. I have a semi-automatic clutch motorcycle, and when you handle it, sometimes the handle pedal becomes very adjective and does not go down at all. After two or three handles, it becomes normal and becomes an adjective again. If anyone has experience in this field, please Help. With the same engine
@bullionbouncer5080
8 жыл бұрын
I have a taotao 110 semi auto I know it's not the best bike but does anyone know anything about them and what brand parts I can buy or if its almost the same as all the rest
@dangerousyvette9916
8 жыл бұрын
I just bought the same bike nd need help
@bullionbouncer5080
8 жыл бұрын
+Dangerous Yvette what issues are you having with yours
@garylowe8601
7 жыл бұрын
my stomp 140 has a carb problem. it runs fine up the revs but when you try an max it out it sounds like it's hitting a rev limiter and won't give more power. it's only just started doing it. any suggestions would be great. thanks.
@bigsmoke8576
7 жыл бұрын
Gary Lowe do you know where the ecu is. Just follow the wire up from the spark plug. Make sure they are all pluged in tight and not loose. Thats whay was wrong with mine
@christianlemonade5355
6 жыл бұрын
Big smoke yes that’s what’s wrong with mine I’m going to try and follow the cable to the ecu.
Пікірлер: 214