Thanks Ray, i too are learning from trial and error, and with your videos you make things a lot easier to understand. I agree with you on this hobby it is so great
@TheGowkiel
3 жыл бұрын
Now I understand everything! Thank you :)
@nitrokyosho
2 жыл бұрын
Glad to help my friend
@bernatsantaeugenia6867
3 жыл бұрын
buen video aprendí un montón
@herschelrichardson6169
10 жыл бұрын
great post man im starting to get this whole heli thing i sure have the fever lol cant wait to get my align trex 450 next week and start putting it togeather im flying a WL toys V922 now but it was a rtf heli so getting my hands in there and setting up a heli is all new to me thanks for the vids
@isuavingalaff
11 жыл бұрын
hey ray,,,new subscriber from the uk here,excellent info for newbies like me...great help fella...thanks
@nitrokyosho
11 жыл бұрын
Try to reset the gyro and re set up the gyro again it sounds like you need to reset the end points
@HankinsMT
10 жыл бұрын
Thank you for your video! Learning all these new terms, percentages and angles etc. can be overwhelming... you have allowed me to learn and understand in laymen’s terms... I just bought the 130X by Blade and enjoying every flight... thanks again!
@MrRazorblood
11 жыл бұрын
Is a regular gyro i think, my heli originally was an align trex 450 Plus before i upgraded it.
@jrdahmani8142
10 жыл бұрын
I watched several videos on youtube to understand this concept and it's the first time I feel understand Pitch curves ... thank you very much
@vansonmafeet734
4 жыл бұрын
Awesome video, Thanks!! I needed that.
@nitrokyosho
4 жыл бұрын
Thank you very much glad to help
@nitrokyosho
11 жыл бұрын
we should get together and fly in the spring
@randyneighbour
11 жыл бұрын
im ok on my dx6i but i could use a bit of help adjusting the endpoints on channel 8 of my turnegy 9x
@nicklower4260
11 жыл бұрын
happy new year Ray to you and your family! please forgive me in the new year i guess i will be asking probably a lot of questions regarding set up. The isnt anyone close or near me within 100 miles of me to get my pro 450 set up via transmitter. i have understood your vids on thottle and pitch curves,however i dont wanna get off to a bad start. I have become very passionate about the hobby and intend sticking to it.just dont wanna get it wrong.lol . i guess its all a learning curve anyway.thanks
@MrRazorblood
11 жыл бұрын
Hi man great vidz very helpful indeed. I have an issue with my tail on a trex 450, when i try to adjust the pitch on my tail it moves completely to the left or right depending on the direction i try to set the trim. I have no idea how to solve this problem, please help me.
@Mrh168
11 жыл бұрын
it sucks that you guy's can only fly in the Summer ,, but at least you safe money on the Spares :) .. loe this Vids keep them comming
@anntekatch5246
8 ай бұрын
Thanks. That really helped!
@nitrokyosho
8 ай бұрын
Thanks my friend, glad to help
@Peaceondastreetssan
11 жыл бұрын
VERY informative .... You must be a teacher or something because I could never explain something that good lol.....
@nitrokyosho
11 жыл бұрын
no
@HIFONICSM3
9 жыл бұрын
Thanks man your such a huge help ...!!!
@nitrokyosho
11 жыл бұрын
we fly from march to dec 10 months. we take off jan and feb ,and by that time i need a break for the holidays and just to get away from it for awhile .then in march you come back feeling fresh and ready to go
@PerryCodes
7 жыл бұрын
These vids are absolutely awesome. Just picked up a Blade Nano CP S and am using a DX6i that I've had for a couple years... I had been flying the fixed pitch 120 SR for a while and could fly CP on the simulator. It was programming the transmitter that I had trouble with. After watching this series, I feel much more confident with programming my DX6i!
@bgorbeene58
11 жыл бұрын
Nice job again Ray... thanks P.S. I also live in New England
@joedecangi4102
10 жыл бұрын
Hi Ray, I have been watching your videos for the past 2 years. I have been flying electric helicopters for 2 years as well. I must say I enjoy your presentations where they are very informative. I do have an issue with one of my helicopters right now. Just so you know I do not fly in stunt mode, not ready yet. Do however fly open air circuit, and hover in any position , figure eights ect... Ok down to the point. One of my Blade 450x went down due to a high wind situation one day. I replaced all 3 cyclic servos. I went through the whole BeastX setup which was fairly easy. Book says to set min and max pitch values a -12 to +12 degrees. Anyway trying not to make this too long, the helicopter does not feel like it used to. It feels very twitchy, and uneasy.My pitch at low stick is -1.9 mid is +3.7 and high is +12. My throttle curve is 0,35,65,75,80. My dual rates have always been 100 and expo has always been 0. Leveled swashplate perfectly, all servos arms are 90 degrees in setup G. Helicopter does fly correctly just very uneasy. Cant put my finger on why. By the way, besides the 3 servos, I also replaced tail boom, belt, rear tail case, and everything in tail case, main shaft, feathering spindle with grommets. Any comments would be appreciated. Thanks.....
@nitrokyosho
10 жыл бұрын
honestly something like that i would have to fly to know whats wrong could be anything
@nitrokyosho
11 жыл бұрын
i need more info is it a regular gyro or fly barless
@OkieRCguy
11 жыл бұрын
Great information, thanks for sharing. By the way, are you familiar with the Audacity P60? I was wondering if you knew anything about it.
@UltraOffie
9 жыл бұрын
Thanks for sharing your passion. Best wishes always.
@aviasafe1
11 жыл бұрын
Great Videos . Thank you very much , for making me much more comfortable with my Hobby Tools .
@boy6named6zoen6
11 жыл бұрын
I finally get it.. Thank you for the lesson..had a lightbulb moment.
@PerryCodes
7 жыл бұрын
Am I THE ONLY ONE that can't stand the clear film that comes on plastic parts??? I peel that shit off immediately.
Пікірлер: 33