I worked on one of these today too! Roll back safety kept tripping. Had to replace the solenoid that controls the self cleaning burner cause it was sticking open. We call it the wash burner. I blew my nitrogen thru the burners and orifices, lots of flour came out. Took care of the issue, mine wasn't nearly as bad though.
@restaurantrepairs
10 ай бұрын
Love it!! These will all eventually be converted to millivolt systems. This is a new location and owner I serve and he gets it. Next it iron muscle that junks out she gets a new pilot assembly, gas valve thermostat and viola!!! No more intelligence. Also none of this crap the way of removing all the burners and cleaning it annually. Great job man!! Thanks for sharing
@billbennett5437
10 ай бұрын
@@restaurantrepairs Thanks man! Unfortunately the ones I deal with have all the extra s..t and are owned by major chains who wouldn't allow such a conversion. At least they don't have as much extra crap as FM.
@hh-oq8gc
10 ай бұрын
Sometimes leaky tanks.... came acros some used to find crust inside on the back of flute till we found micro crack around the welds
@restaurantrepairs
10 ай бұрын
Ooh! Hadn’t considered that 👍🏼
@justanoldhandyman
10 ай бұрын
Good job Joe. What a mess.!👍
@harrydickson4575
10 ай бұрын
Nice 👍👍👍
@evelynperez7576
10 ай бұрын
Nice
@donwhite6713
5 ай бұрын
I need your wisdom. I have a pasta boiler with leaking burner tubes. I'm posting this here because pasta boilers are mechanically very similar to deep fryers. Have you ever tried repairing the burner tubes. Maybe weld them? Have you ever replaced the oil vessel. I have always thought this is a situation where it means replacement, but this machine cost $10k. Thanks in advance for any advice you can provide.
@restaurantrepairs
5 ай бұрын
Email me at joe@meadowbrookbrands.com and let’s get connected.
@Shrampion
9 ай бұрын
A solenoid is the same as a relay/contactor, right?
@DomManInT1
10 ай бұрын
Look like a lot of back flow there with gas/flame coming back out the front.
@80camaroguy10
Ай бұрын
we have one that is making that popping issue and shooting flame out the exhaust. could this be from the same issue? has new burners and baffles installed.
@restaurantrepairs
Ай бұрын
Is it like this style or is it more current with an electronic panel and display on the front
@andrewcastiglia9548
10 ай бұрын
Except for the fact that at the end of the video the pilot clearly gets blown out again and is only lit again by the flames from the burner tube... If it was out maybe a 1/2 second longer I bet the pilot thermocouple kills the gas.
@restaurantrepairs
10 ай бұрын
After the last clip I adjusted gas pressures down, and haven’t had any blowout or dropout issues since the repair on Wednesday.
@andrewcastiglia9548
10 ай бұрын
@@restaurantrepairs oikes 👍👍👍 top notch diag and fix.
@mattparker8304
10 ай бұрын
Any idea on the cause of the buildup? Is this LP or natural?
@restaurantrepairs
10 ай бұрын
That’s the REAL mystery here. It’s NG. Only a 2019 unit. I see this when the basket hangers are broken and they hang baskets direct on the chimney and oil streams down into it, but this unit had a basket hanger. I’m curious to get a rod into the #2 fryer and see if it’s similar. It IS a high volume location and that’s fryer #1 so the highest use but still…. 🤔
@davejohnsonnola1536
10 ай бұрын
Even with the hangar bracket, the tall cooks like to hang the baskets off the chimney. On our flat top the idiots like to scrape the spatulas on that flue. Have to search for fotos but took one Keating flat top out of service for deep cleaning and rebuild... removed 19 lbs of char and muck from underneath and in the chimney.
@mattparker8304
10 ай бұрын
I was expecting a 10 year old LP unit….if you end up finding out the cause make sure to update us
@restaurantrepairs
10 ай бұрын
@davejohnsonnola1536 definitely all the buildup on the stack supports your point. 👍🏼
@restaurantrepairs
10 ай бұрын
Will do Matt 😎
@thomasmann3560
10 ай бұрын
I hate that design, idk why, if pitco were gonna have flame sense and ignitors in the cabinet anyway why even have a pilot. You could just start the main birnwr and be done with it..
Пікірлер: 25