▶ C'mon over to bit.ly/44Vf06I where you can order this PLCnext Technology Starterkit directly from @phoenixcontact1923.
=============================
▶ Check out the full blog post over at
realpars.com/plcnext-engineer
=============================
⌚Timestamps:
00:00 - Intro
00:53 - Download PLCnext Engineer
01:45 - Start PLCnext Engineer
02:41 - 1) Create a new project
03:49 - Select your controller
04:36 - 2) Establish Ethernet communication
04:47 - Connect the Ethernet cable
05:05 - Set the IP addresses
=============================
This is the second of a series of videos about the Phoenix PLCnext Starterkit, and we’re going to take you through the steps of creating a New PLCnext Engineer Project. If you are interested in a powerful but inexpensive PLC, you might want to consider the PLCnext Starterkit.
If you haven’t already done so, download and install PLCnext Engineer which is the programming software for the PLCnext Starterkit.
You can easily download PLCnext Engineer by following this link:
www.phoenixcontact.com/en-us/...
The first thing to do is start PLCnext Engineer.
We’re going to accomplish two things in this video.
1) First, we’ll create a New Project.
2) Second, we will start establishing Ethernet communication between the PLCnext Starterkit and a laptop or personal computer by configuring the laptop Ethernet port and setting it to a fixed IP address.
1) Let’s start a New Project.
Starting a new project is just like opening a new document in Word. So, to start a new project, click File, and then click on New Project from the drop-down menu.
A Folder called Project will appear under a window called PLANT. By default, when a NEW project is opened, PLCnext Engineer automatically assigns the name PROJECT1.pcwex. That name can be changed at any time.
First of all, we need to include details about the PLCnext Starterkit Controller.
Secondly, we need to ensure that Ethernet communication is properly established between the PLC and the laptop.
Thirdly, we will include information about the I/O modules currently mounted on the Starterkit. This third step is referred to as Configuring the I/O and will be explained in the next video of this series.
Under Components on the right side of your screen, drill down through the Network folder to the Controller folder.
As your mouse hovers over each Controller listed, more details about the controller will be shown. Be sure to select the controller that matches yours.
Note that Article Number and Order Number are the same things.
Once you select your controller, drag it over and drop it into the Project folder.
2) Let’s move on to our second task and begin the process of establishing communication between the PLC and your laptop.
Connect the Ethernet Cable between the PLC and the laptop.
The PLC and the laptop communicate to each other via the Ethernet Cable if the respective IP addresses are set correctly. So, our first job is to set the IP addresses.
Let’s start with the laptop. We’re going to go through the steps to set the laptop Ethernet Port IP address to 192.168.1.1.
Click on the Microsoft symbol. Click on Settings. Click on Network and Internet. Choose Ethernet from the choices listed. Over the right-hand side of the screen, choose Change adapter options.
=============================
PLCnext Tutorial for Beginners - Part 1 | What’s in the Starterkit Box?
realpars.com/plcnext-starterkit
PLCnext Tutorial for Beginners - Part 3 | Configure the I/O Modules realpars.com/phoenix-contact-...
PLCnext Tutorial for Beginners - Part 4 | How to Easily Create Ladder Logic Programs realpars.com/plcnext-ladder-l...
=============================
Missed our most recent videos? Watch them here:
realpars.com/turbine-flow-meter
realpars.com/sinking-output
=============================
To stay up to date with our last videos and more lessons, make sure to subscribe to this KZitem channel:
bit.ly/realpars
=============================
TWEET THIS VIDEO ctt.ac/TVnac
=============================
Follow us on Facebook: / therealpars
Follow us on Twitter: / realpars
Follow us on LinkedIn / realpars
Follow us on Instagram / realparsdotcom
#RealPars #PLCnext #automationengineer
Негізгі бет PLCnext Tutorial for Beginners - Part 2 | Create a New Project and Configure Ethernet Port
Пікірлер: 30