I'm getting an intermittent "I/O Error" message during logging where all the inputs will suddenly go blank and in the CSV log all inputs will show as NaN.. but then will come back again. Can you please elaborate what this means? All the connections are tight from what I can tell, but even then, how would it stop working then inexplicably work again?
@martinraket
9 жыл бұрын
I have just purchased a Pod-300 but the menu "configure alarms" is not there. Do i have a old firmware version or am i missing something?
@powerBusa1340
Ай бұрын
I have pc5 in my hayabusa gen 2 2009 will this work?
@martinraket
9 жыл бұрын
I solved that very quickly, updated firmware and there it was. But what was the point of the warning lights with the old firmware anyways if you could not configure them? :)
@martinraket
9 жыл бұрын
Aha ok, i get it. Thanks for the very quick answers! :)
@jaydwright2399
9 жыл бұрын
Have the pod 300 installed but no data shows for speed or coolant??? How or what do I need to do to get it to work ,it shows rpm throttle pos exc.
@robertvondarth1730
2 жыл бұрын
Does the pod have an internal battery? I had mine running just fine for a while, I unplugged it for several months, now when I plug it back in it has a blank screen Thanks
@DynojetResearch
2 жыл бұрын
It does not have an internal battery Please reach out to our techs at customerservice@dynojet.com and they can point you in the right direction.
can it log EGTs on a snowmobile when used with PCV? (2016 M6000) Could I put another EGT sensor in a better place (closer to the cylinders) for a more accurate reading and still log that? It is kind of hard to peek down at EGT reading from the stock gauge as I'm holding the sled at WOT at 80mph. In short can I add another egt sensor and log that data with the pod 300 on a 2016 M6000
@DynojetResearch
3 жыл бұрын
Please email us at powercommandertech@dynojet.com and we can help you out.
@bobbynickerson7631
2 жыл бұрын
what is the point of having this?? will it increase my fuel mileage,maybe hp. as well,xcancelling rev limter,quicker response on the thorttle,will this work on a 08' can-am spyder? thnks.
@DynojetResearch
2 жыл бұрын
You've got that right! Unfortunately, we do not support the '08 Can-Am Spyder.
@kissubin
9 жыл бұрын
nice video+
@TheErsatzMode
4 жыл бұрын
Can this be configured to show fuel consumption in real-time (MPG)?
@DynojetResearch
4 жыл бұрын
No, it cannot. Here's more info about the POD-300: www.dynojet.com/power-commander-pod-300-display/
@TheErsatzMode
4 жыл бұрын
@@DynojetResearch, thanks. Perhaps this is a feature you could add to future products?
@DynojetResearch
4 жыл бұрын
We can definitely keep it in mind. Thank you for the suggestion!
@doremon4126
4 жыл бұрын
Is it Installed in Ktm RC 390 2020 or not 🙏
@DynojetResearch
4 жыл бұрын
Yes, if you have the Power Commander V for that bike (SKU #18-023) installed, you can use the POD-300: www.dynojet.com/power-commander-pod-300-display/
@rubio90r
9 жыл бұрын
Can u adjust the autone map with this pod 300
@jaydwright2399
9 жыл бұрын
***** installed pod 300 only data I can get to show is rpm,throttle position, engine speed,no coolant temp no speed ,I have the pcv only was wondering how to get all the data channels under pcv to read on the gauge
@seinfeld11123
3 жыл бұрын
dyno jet. lets innovate get something new going !!!
@DynojetResearch
3 жыл бұрын
We've got new stuff coming out constantly, Jack: www.dynojet.com/blog/dynojet-new-to-the-garage-november-2020/
Пікірлер: 25