That SRX is a straight up ripper! Good to see a video of somebody actually properly exercising one 🔥🤘🏼🚀
@MattMcHugh257
6 ай бұрын
Thing sure does rip!
@shikatok
7 ай бұрын
Funny to see that srx not only hold up but also get out of the hole faster than the newer sleds.
@MattMcHugh257
7 ай бұрын
The thing really rips good!
@inagoodschmude9550
7 ай бұрын
Funny no it’s awesome.
@shikatok
7 ай бұрын
@inagoodschmude9550 by funny, I mean awesome. I have a strong sxr 600 with mods, new skis/carbides, a rear riser kit,new springs, bars and I'm at 6000 miles and have no issue keeping up with new 700 sleds. Meanwhile, I dont have to drop the motor to fix something. Old triples are hidden gems, I'll keep mine until I can't ride it. No matter the smell or the oil cost/consumption.
@lost_marblesadv
7 ай бұрын
Ahh. Typical Yamaha Powersports of that era. Fast as hell, but didn’t handle for shit. I’m a die hard Yamaha fan, but you can’t deny they beat you up when the trail got rough.
@jeanettewest
7 ай бұрын
And the man riding it was kinda big looking compared to the new Pol rider.
@dawsenwhiteis868
7 ай бұрын
I love to watch people ride like this. This is the stuff that is actually entertaining, not some one out for a Sunday stroll with a max speed of 15 mph. Snocross, but on the trails! Rippin triple digits and pinning it out of every corner, keep it up! Love the content. Keep er pinned !
@MattMcHugh257
7 ай бұрын
Glad you enjoyed it!
@grantdubridge7995
7 ай бұрын
The is no working or skill in riding field trails. Get in the woods then you have fun.
@kevinjozwiak5696
6 ай бұрын
Amen brother!🔥🚀
@tomchalette1509
6 ай бұрын
Looks like the Yamaha spanked the Polaris 🤪😎🍻
@MattMcHugh257
6 ай бұрын
It did! 😂 every time we lined up it would be a different result tho. I’d like to get them side by side on a lake, I bet they’re basically the same speed.
@MattMcHugh257
6 ай бұрын
Oh boy thought this was the video I was on the srx and my bro was on the 800. Never mind! The srx is way faster than this 600!! Haha
@inagoodschmude9550
7 ай бұрын
SRX FTW what’s it setup like sounds like aftermarket pipes?
@MattMcHugh257
7 ай бұрын
Bender triple stingers on the stock triple pipes
@joshsims9267
7 ай бұрын
Which trail was this? Most of southern WI is all beat up now (if it's even still open)
@MattMcHugh257
7 ай бұрын
This was Jan 18 (Thursday), riding Washington county. I’m sure the trails are closed now that it’s above freezing and raining.
@davelawson5862
7 ай бұрын
God! That srx is gone!
@MattMcHugh257
7 ай бұрын
Way faster than the new 600s!
@grantdubridge7995
7 ай бұрын
I don't like it. Now I see why they make knee pads for them. The old sled doesn't need knee pads. And of course, it's set up too lift the skis constantly. That would be changed immediately. I see the Yamaha is set to do that also, that's why he didn't make a corner and had to slow down on every curve.
@MattMcHugh257
7 ай бұрын
Got any advice on how to keep the skis down on the srx? On the new sleds I’ve never ridden one that stays flat unless you’re hanging off it and I’ve been on many different setups. But I’m definitely curious what you have to say about the srx because it sounds like you have some experience.
@grantdubridge7995
7 ай бұрын
@@MattMcHugh257 I Believe you need to add blocks onto the transfer rods. Those are the two rods you see at the back with plastic spacers on the end. Bigger spacers don't allow the suspension to rock as much. They also look to have adjustable eye bolts holding the front straps. If you pull the straps tighter that should put more pressure on the skis.
@MattMcHugh257
7 ай бұрын
@@grantdubridge7995 thanks I’ll looking it.
@grantdubridge7995
7 ай бұрын
@@MattMcHugh257 My brother, who had an SRX, said that you only need to switch the spacers from one end of the bars to the other. If the longer spacer is on top. The longer spacer needs to be on bottom. He also said you can make the front spring on the suspension softer for more pressure on the skis.
Пікірлер: 28