Get your Trash can here Polaris.trashcan@gmail.com
@ronwitt1
10 ай бұрын
Todd your stuff is great. Watch them all. Love it. You do know you have a disease with no cure. I only have a mild case. You got it bad. Best part. We enjoy it !!!
@toddclyne3493
10 ай бұрын
I hope a cure is never found 🤣🤣🤣
@brandonhanson8682
9 ай бұрын
Glad to see your finally doing a monoblock. I've been riding monos for years.
@willsgarage2092
10 ай бұрын
Wetting the ol back neck down tearing the motor down awsome video bud 🍻 cheers
@toddclyne3493
10 ай бұрын
🤣🤣 love that saying
@MidnightPolaris800
10 ай бұрын
Those monoblocks sound wicked with just a can...with triples and stingers i think they are in the league of best sounding triples
@toddclyne3493
10 ай бұрын
Should be epic when we fire it up
@gregmcnamara9229
10 ай бұрын
For your 1st mono block disassembly you made it look easy. Im also impressed with tge shape of the rotating assembly for 6500mi. Goes to show proper maintenance and good oil go a long ways.
@toddclyne3493
10 ай бұрын
Absolutely
@kriegsy69
10 ай бұрын
Those monoblocks will run a long time with good oil and a bit of maintenance. I had a 93 special that i sold to a buddy. Last i heard it had over 23k miles and never been apart! Dad had a 97 limited, and it had 16k miles on it before he traded it in. Good luck on the build!
@toddclyne3493
10 ай бұрын
They definitely will go and go
@triplehelper6944
10 ай бұрын
I had a brand new MXZ 583 in 97. There wasn’t a Polaris that could touch me. But I only work on Polaris triples now. They are good engines as long as you know how to make them sing.
@toddclyne3493
10 ай бұрын
A properly tuned ultra should have given you a good run 😁
@airman6822
10 ай бұрын
My buddy had a new 96, I think, XLT. Back in the day they had wrist pin issues and his was fixed under warranty. I had the sled for a while and he has it back with about 6k on the clock. Still a good runner. Cheers!
@toddclyne3493
10 ай бұрын
If done right they go and go
@taylorbordelon7964
10 ай бұрын
Keep the updates coming. We’re excited to follow along.
@toddclyne3493
10 ай бұрын
I sure will
@just_in_time5518
10 ай бұрын
So nice to see you boys working on sleds again! 😁
@toddclyne3493
10 ай бұрын
It's been awhile
@richsharp1524
10 ай бұрын
Love the dimple die That’s a great look 😊
@toddclyne3493
10 ай бұрын
Thanks
@jdomres7506
10 ай бұрын
Looks like an ultra 680 motor . I love the old triples
@toddclyne3493
10 ай бұрын
XLT 600
@Mburin_B
10 ай бұрын
Those engines were good as long as you didn't over rev them. The crankshaft would come out of time from harmonic vibration there just pressed together, I drilled and pinned the crank on one and then welded the pins in tuned the clutching to max out around 10k had tripple pipes on it thing was a beast, would beat new 850s off the line to 50mph I just sold them 2 years ago
@toddclyne3493
10 ай бұрын
Nice
@glennsprague8767
10 ай бұрын
What a great engine to start with todd.cant wait to see it all mocked up, looking good,👍
@toddclyne3493
10 ай бұрын
Sending the cylinder off tomorrow. I'll be getting the chassis painted soon and start reassembly
@matthewbegin3462
10 ай бұрын
What a great build!! Thanks for bringing us alogn.
@toddclyne3493
10 ай бұрын
Enjoy
@tr4415
10 ай бұрын
Nice-looking weld you did on that motor mount ...
@toddclyne3493
10 ай бұрын
Thanks buddy
@lesterburritt2038
10 ай бұрын
Can't wait to see it all come together
@toddclyne3493
10 ай бұрын
Slow but will happen
@emmanueldelescaille731
10 ай бұрын
Nice to see you guys in the shop again working on sleds
@toddclyne3493
10 ай бұрын
It definitely feels good
@jaymoe5.7
10 ай бұрын
Can't wait to see this thing come together! Excited to hear those AAEN pipes come to life too since I never got around to running my XLT with them on since I didn't wanna cut up my nice hood haha.
@toddclyne3493
10 ай бұрын
Heck yeah
@shawnbuckendahl1968
10 ай бұрын
First mono block in the shop? Are you sure there's enough to your shop to contain all those ponys?😂😂
@toddclyne3493
10 ай бұрын
🤔🤣🤣🤣
@thomaspeterson5867
8 ай бұрын
Sure enjoy your videos love Polaris!
@toddclyne3493
8 ай бұрын
Glad you like them!
@neilsevery2209
4 ай бұрын
Love your videos!!!!
@toddclyne3493
4 ай бұрын
Thanks
@williampeterson6025
10 ай бұрын
Gunna be sweet build thanks for the shoutout
@toddclyne3493
9 ай бұрын
You bet
@jeffpine3036
10 ай бұрын
brings back memories of hating, 1st loving the mono block. then hating it. seems like I rebuilt more XLT's then any other Fuji motor. this was it before the storm 800 triple. well you had the 650s which were great. my dream triple would be a early 600 Fuji 1985 or 1986.
@toddclyne3493
10 ай бұрын
I had great luck with the two mono blocks I owned in the 90s
@Mattslawnmaintenance
10 ай бұрын
HES BACK!
@toddclyne3493
10 ай бұрын
Finally 😂
@nuttersspeedshop
10 ай бұрын
Gotta love the XLTs!
@triplehelper6944
10 ай бұрын
Go big nutter
@toddclyne3493
10 ай бұрын
This should be a special xlt when done 😂
@brianwilber4347
10 ай бұрын
Everyone bashes the xlt but I loved my 96 xlt special with the x-tra 22
@brianwilber4347
10 ай бұрын
I meant x-tra 12
@toddclyne3493
10 ай бұрын
It was the number one selling sled for a good reason
@brianwilber4347
10 ай бұрын
@toddclyne3493 many say they were slow, but mine ran really well, it did have pipes and clutch work
@WisconsinHunter2008
10 ай бұрын
Haha you have the same can coosie we got lol, some guy at haydays gave us some
@toddclyne3493
10 ай бұрын
That's where this one came from 😂🍻🍻
@WisconsinHunter2008
10 ай бұрын
@@toddclyne3493 🤣
@user-yv3sv4ts9s
9 ай бұрын
🎉
@roadhammermike757
10 ай бұрын
Hi there Todd how much for a trash can I have a 97 storm we have to be careful up here in Ontario Canada what's your thoughts on how loud it is? Great content by the way Mike Cormack 😊
@toddclyne3493
10 ай бұрын
polaris.trashcan@gmail.com
@johnstrandell3863
6 ай бұрын
Hi, what can cause a camshaft to move to one side, I got an XLT 600 from a friend, he told me that the engine lost power and after a few meters the engine locked up.
@toddclyne3493
6 ай бұрын
No camshaft in a two stroke that I know of
@michaelaudy6415
10 ай бұрын
I was thinking how clean the innards look during the tear down. Sometimes you can’t judge a sled by the odometer
@toddclyne3493
10 ай бұрын
I agree
@davewashburn2227
10 ай бұрын
Where does one get grease fitting for the sleeve where ski shaft goes
@toddclyne3493
10 ай бұрын
Amazon or auto store. It's a press fit fitting
@davewashburn2227
10 ай бұрын
@@toddclyne3493 thanks
@chrisbetter9806
10 ай бұрын
What's on the lift in the next bay?
@toddclyne3493
10 ай бұрын
29 Ford roadster
@Z-Bart
10 ай бұрын
What years did they make that mono block?
@toddclyne3493
10 ай бұрын
92 to 2000.
@jordangryg5442
10 ай бұрын
what is a mono block boys
@toddclyne3493
10 ай бұрын
😁
@Mattslawnmaintenance
10 ай бұрын
It wants to come so bad.... thats what she said!
@toddclyne3493
10 ай бұрын
Always 😂😂😂
@darylhomegren2943
10 ай бұрын
I drilled out the 6 bolt pattern in a piece of 1/4 " thick piece of metal put the 6 bolts in and just evenly tighten up like a head bolt at it pops right off never use only 3 easy way for anyone who doesn't have a welder to make a puller simple and effective
@toddclyne3493
10 ай бұрын
Awesome
@danbenson5319
10 ай бұрын
I had an 800 storm. Had every mod known to man. It was fun and fast until something broke. And something always broke.
@toddclyne3493
10 ай бұрын
I think that just comes with snowmobiles in general 😆
Пікірлер: 82