True porcelain tile is the same colour throughout the tile and surface , the tile you're using has the same colour glaze as the body (glazed porcelain ). This means that if it chips, there is less chance of seeing it compared to light body porcelain and dark surface glaze. Thank you for the video.
@rdy4trvl
Жыл бұрын
Great demo. Just a question on the bullnose - this would seem to work great where the tile surface and porcelain are the same color - like your gray example (very nice) but I'd guess it might not always turn out as nice as yours did. Something to keep in mind when selecting tiles.
@Dazmpower
Жыл бұрын
Very good video and really helpful
@mattmason7554
2 жыл бұрын
Awesome information.
@shanemacintyre3200
Жыл бұрын
Nice!
@georgeb9651
3 жыл бұрын
Great job, where do you get the p egg ofile wheel. The big box stores did not have them.
@arrowheadtileandstone8973
3 жыл бұрын
Amazon has them if you don’t have a local Dal Tile or Tom Duffy.
@user-jx2zz4lb5d
2 жыл бұрын
Great and to the point video, what speed setting/rpm on the grinder are you using?
@arrowheadtileandstone8973
2 жыл бұрын
For these dry pads I usually stay around setting three or four which is about 6800 to 7800 RPM I believe. Keep it around level two (4000 RPM) for the profile wheel. I’ll double check the RPMs when I get back to the trailer later.
@user-jx2zz4lb5d
2 жыл бұрын
@@arrowheadtileandstone8973 i appreciate the response mate.
@davidw9025
2 жыл бұрын
Very helpful. What, no eye protection?
@oddopops1327
4 ай бұрын
👍👍😉
@Charlieant2887
3 жыл бұрын
Do you recommend doing this on shiny porcelain tiles?? Looking options for stairs when they dont come with bullnose..
@arrowheadtileandstone8973
3 жыл бұрын
Yep absolutely, you’ll need to Go up to a 1500 or possibly even 3000 grit dry pad if you’re really wanting to make it shiny.
@caseyjeremy1602
2 жыл бұрын
I know im randomly asking but does someone know of a trick to get back into an instagram account..? I stupidly forgot the password. I would appreciate any help you can offer me!
@lianbenton9174
2 жыл бұрын
@Casey Jeremy instablaster :)
@caseyjeremy1602
2 жыл бұрын
@Lian Benton Thanks so much for your reply. I got to the site on google and Im in the hacking process atm. Seems to take quite some time so I will reply here later when my account password hopefully is recovered.
@caseyjeremy1602
2 жыл бұрын
@Lian Benton it worked and I now got access to my account again. I'm so happy:D Thank you so much you really help me out!
@k80kay
2 жыл бұрын
Will this attach and work on a ryobi angle grinder?
@arrowheadtileandstone8973
2 жыл бұрын
Yep it should attach to any angle grinder. The only thing you’ll want to make sure is that it is a variable speed. Technically you could use it with a standard grinder but it’s dangerous and spinning too fast. I’ve used it on standard grinders in the past but it is super risky and not supposed to at that high of RPM
@bruce6364
10 ай бұрын
You Da Man
@arrowheadtileandstone8973
10 ай бұрын
👍
@ninaalexa6163
3 жыл бұрын
What brand is the profile wheel your using
@arrowheadtileandstone8973
3 жыл бұрын
Alpha, from Dal Tile
@LeoSal
3 жыл бұрын
Could you list the equipment used?
@arrowheadtileandstone8973
3 жыл бұрын
5 inch Makita SJS variable speed grinder, 3/16” stone profile wheel, 400 grit dry polishing pad and 800 grit dry polishing pads with Velcro backer. Most Dal-Tile sand Tom Duffy carry the pads/etc. Home Depot online has the best deal for the grinder.
@chapothakid5080
3 ай бұрын
Not really round but yea..
@ninaalexa6163
3 жыл бұрын
Dal tile doesn't sell this I'm in Michigan. Is there a link u can send me so I can purchase off Amazon or something
I don’t see the Alpha on Amazon but one of those other ones will work they just won’t last as long.
@ninaalexa6163
3 жыл бұрын
Ok, thank you
@rintutileswork5191
3 жыл бұрын
I want this product so plz address
@arrowheadtileandstone8973
3 жыл бұрын
Go down to Nina’s comment. The info should be in her comments
@robinbuchan6233
2 күн бұрын
no face mask no hand protection no eye protection it's likely he will need arm protection
@tomnapper101
2 жыл бұрын
doesn't look like it bullnose to me a better of with full router 👍
@arrowheadtileandstone8973
2 жыл бұрын
You should make a video and post it, I’d love to see how you do it 👍
@tomnapper101
2 жыл бұрын
@@arrowheadtileandstone8973 old stone mason from London I dun lots of bullnose on Portland Stone York stone l limestone at end doing porcelain I would use a vanity blade top bottom on porcelain i make like a make a wedgie shape put full router on it padd it down 120 git 220 git 320 git finish it off I' no a little bit about it I wasn't criticizing I was just want to help 👍
@arrowheadtileandstone8973
2 жыл бұрын
Oh for sure! I wasn’t offended :) always ready to learn and improve
Пікірлер: 43