Man I just got these about a month ago and they are really good looking speakers and their sound is really Really good !! Thank u for the Deep,unboxing man ! Their Bass is so clean 🔥🔥🔥
@shamrock4840
2 жыл бұрын
How are they for action movies
@RockCity1111
2 жыл бұрын
@@shamrock4840 they are actually great but overkill for surround unless u really want them. Great for front channels with or without a subwoofer. It's a great speaker
@shamrock4840
2 жыл бұрын
@@RockCity1111 you still have ? Yes they’d be fronts . It’s these or 603 S2 B&W
@shamrock4840
2 жыл бұрын
606 S2 not 603
@fatboyvin
2 жыл бұрын
which amplifier are you using? i wonder if the audiolab 6000a will be okay for these speakers? Or from your experience or research, what do you think is the best amplifier for these speakers? Kindly help.
Ενα μεγάλο μπραβο για τις παρουσιάσεις σας και τα deep unboxing!
@RanTausi
2 жыл бұрын
Many thanks for sharing the great video. greetings and Mary charismas from Israel
@hxosplus
2 жыл бұрын
Thank you. Same to you.
@andrejensen7837
Жыл бұрын
And by the way the tweeter is allmost a copy of the scanspeak ringradiator . Guess the patent ran out. Amazing you can get that quality for that price .
@andrejensen7837
Жыл бұрын
The shape of the woofer surround help the airflow
@tedbrookins
2 жыл бұрын
Well done! Thank you very much!
@WigandKleine
2 жыл бұрын
Hey man how did you get the rings off to demount the woofers? An do you have a picture of the whole crossover? Thanks so much.
@johnnyhiett
2 жыл бұрын
Thank you for the only teardown of the R200! I just bought these and like everything but the tweeter. Do you know how to remove the tweeter? I wanted to test them with a different tweeter before I decide what to do. I have a speaker selector switch, so I was comparing these to Polk SDA2, Sony SSCS5, ESS AMT1, etc. Amp is Denon PMA1600NE with Denon DCD1600NE SACD deck.
@hxosplus
2 жыл бұрын
Just remove the ring with your hands.
@justinking5964
2 жыл бұрын
use cloth to cover the tweeter.
@johnnyhiett
2 жыл бұрын
@@justinking5964 hi, I did start with 4 ply of Swifter sheet,3, 2, 1 ply. 4 or 3 ply cut the piercing radiation but also killed some needed treble. Crutchfield was sympathetic and only charged $12 to return shipping them. It's a real shame since they were beautiful, solid, the best tight bass.
@justinking5964
2 жыл бұрын
@@johnnyhiett thx. I am not native spearker but I can see you like this speakers becasuse of the great bass sound?there are many solutions to reduce the harshness of twteer i assumed. For example, using a patch of plastic or try water glue ?
@johnnyhiett
2 жыл бұрын
@@justinking5964 hi, yes there were many ways to reduce the treble of the ring tweeters... but they are just bad for smooth sound or good imaging. It made no sense for me to pay for a bad new speaker. So now I'm refurbishing some 45 year old ESS Tempest, 8 inch 2 way speakers. They have the mid sized original Heil AMT tweeters. I had one membrane factory replaced last year. I just got Hivi F8 woofers from Parts Express for the cabinets, $60!
@yvesboutin5604
2 жыл бұрын
The crossover seems very complex with many iron core inductors. They tried to save a few bucks by skipping on quality component. How sad! Thanks for the video.
@RockCity1111
3 жыл бұрын
I'm the one who asked you to do this Deep unboxing and I appreciate it so much. I had a question. What receiver or amp did u use to sound test these R 200s ? I bought them a couple months ago but haven't heard them yet because all the Av receivers have been out of stock. I have heard they might be hard to drive . Did u play them on a Receiver ? I'm looking at buying the Brand new Yamaha Rxa4a 110 watt and I figure it would have enuff power to push them pretty good. Thank u Good sir !!
@hxosplus
3 жыл бұрын
Hi, the amp is a Rotel one. But Yamaha, Marantz, Cambridge Audio are excellent choices as well. Check the Harman Kardon Citation Amp, a marvelous choice.
@RockCity1111
3 жыл бұрын
@@hxosplus Ahhh. Thank u !!🔥🔥🔥
@ПавелСтекольщиков-ы5л
2 жыл бұрын
rotel 1552mk2 +dac ,Marantz 6007+,audiolab 6000a(maybe a little cold)
@AudioElectronicsChicago
3 жыл бұрын
special woofers
@hxosplus
3 жыл бұрын
This speaker is extremely good designed.
@sturdyvw
3 жыл бұрын
Looks like a shitty stamped steel basket but the lower venting of the spider and pole piece is smart, hardly new or high tech but hey they are cheap speakers.
@danielcarlsson615
3 жыл бұрын
Nice video. Always fun to see how they are built. But the crossover isn’t good. Bad parts for most of the components. And a lot for a 2 way speaker too.
@RockCity1111
2 жыл бұрын
I'm going to take one of mine apart to see the tweeter if it's possible. I wanted to know if it had a heat sync like the Bowers and wilkins s2 606 ?
@hxosplus
2 жыл бұрын
Don't think so
@RockCity1111
2 жыл бұрын
@@hxosplus thanks. I saw a cut out picture of the speaker externals and the bracing and it doesn't look like it. I just ordered a Yamaha Adventage Rxa4a this morning after waiting 6 months for them to get them in stock at Crutchfield. Thank u for always being there when I have a question
@ManosPairis
3 жыл бұрын
Σύμφωνα με τις προδιαγραφές, πρέπει να είναι δύσκολο φορτίο. Πόση είναι η ελάχιστη απόσταση από τους πίσω και πλαϊνούς τοίχους, που χρειάζεται αυτό το ηχείο; Πολύ ωραία κατασκευή, σχεδιασμός και σημασία στη λεπτομέρια, πολύ καλή και η τιμή του.
@hxosplus
3 жыл бұрын
Θα διαβάζετε την δοκιμή του στο τεύχος του περιοδικου hxos+ που κυκλοφορεί σε λίγες ημέρες www.hxosplus.gr/
@alainduquenois3812
2 жыл бұрын
Pourriez vous faire un unboxing sur des wharfedale Evo 4.2
@RockCity1111
5 ай бұрын
Hi 👋 how do u take the woofer out ? I need to pop off the cover to get to the screws but dont know the way to pop off the cover to get to the screews. I blew my woofers and need to replace them. I loved these speakers. 😢
@hxosplus
5 ай бұрын
Just pull it out with your hands.
@RockCity1111
5 ай бұрын
@@hxosplus thanks. I just didn't want to break it.
@Quietprofessional1
Жыл бұрын
Considering the price of these speakers they have cheap stamped baskets for the woofer cheap iron corn doctors these speakers are cheaply made and they're charging a pretty good premium for them I'm kind of disappointed.
@jerryjohnson3801
3 жыл бұрын
I have a bad woofer how did you get it out,
@hxosplus
3 жыл бұрын
It's easy, just pull out the ring with your hands
@MangBentot
11 ай бұрын
Is the woofer made from cast aluminum basket or polymer
@hxosplus
11 ай бұрын
It is stamped steel. Metallic frame.
@MangBentot
11 ай бұрын
Well atleast its a steel...good to hear that👍
@HomeCinemaJunkie
2 жыл бұрын
Now I understand why they dont show the drivers more on the web site = stamped basket... dealbreaker for me.
@johnnyhiett
2 жыл бұрын
Even tho they are cheaply made woofers, they sounded better on the fast attack and decay bass than anything I've tested. The cabinet must have perfect tuning and good spectral decay.
@1980easyboy
3 жыл бұрын
What is the best affordable Bookshelf for you? Have you tested Heco Elementa 300, too? I own Them and would Like to know what could be better. And they are really awesome. Kind Regards
@hxosplus
3 жыл бұрын
This Polk is very good and the KEF LS50 meta as well.
@siriosstar4789
2 жыл бұрын
What exactly is a " deep unboxing " ?
@hxosplus
2 жыл бұрын
Looking inside the speakers
@siriosstar4789
2 жыл бұрын
i see, thanks . that's a lot more interesting than watching someone open a cardboard box .
Пікірлер: 65