I really appreciate you taking the time to make these type of instructional videos...so much to learn! thanks!!
@polznbladz3242
6 жыл бұрын
Thanks for telling me your thoughts
@dereksadler3105
6 жыл бұрын
Very useful. Definitely the best way to cut rubbers. But if you use one channel to cut rubbers for several channels of the same size they sometimes don’t match. Difference can be very noticeable. Need some good scissors please.
@christophermorrison3938
6 жыл бұрын
Informative video bob especially for new moerman users.Always enjoy your vids Cheers
@polznbladz3242
6 жыл бұрын
Thanks
@VenomCruster
2 жыл бұрын
What I like to do is take out the stock rubber that comes in the channel and not use it on windows, rather I use it as a template for cutting other rubbers. I simply use a piece of wood to line up the template rubber and new rubber to have them flush at one end, then I straighten the rubber because they usually have a curve, I mark the line then I cut with a dedicated rubber cutting tool called razor Bill.
@polznbladz3242
2 жыл бұрын
A rubber template.
@allaboutcleaning
6 жыл бұрын
It’s a special tool that needs to be handled a little differently. Knowledge is power. Keep up the good work!
@polznbladz3242
6 жыл бұрын
It's a bit like a temperamental girlfriend. You have to treat it nice or you don't get results
@allaboutcleaning
6 жыл бұрын
Polzn Bladz Your not kidding.... Lol
@allaboutcleaning
6 жыл бұрын
Great video once again... thanks for the tips!
@polznbladz3242
6 жыл бұрын
Thanks Alan. Your going to hear things you've never been told before in these series. No nonsense made up rubbish. Just the info you need to know everything about how to use this tool
@tommcdaniel4900
6 жыл бұрын
Informative audio. Impossible though, to actually see what was going on.
@polznbladz3242
6 жыл бұрын
You want to try seeing what you're doing with a cam strapped between your eyes
@aaron6841
3 жыл бұрын
I always have trouble getting my rubbers on
@JorgeChavez-xm2ew
6 жыл бұрын
Can't see anything.
@dkr0802
6 жыл бұрын
Great video . Keep up the good work. What rubber are you using. Thanks 👍
@polznbladz3242
6 жыл бұрын
Thanks Dave. I use Moerman soft
@flamadiddler
6 жыл бұрын
Polzn Bladz how many days use do you usually get with a Moerman rubber?
@DeekMacGibson
4 жыл бұрын
Hello Bob Can you tell me the video title you did about putting super glue on the end of the rubber to stop wear. Cheers matey 👍🏽👍🏽👍🏽
@polznbladz3242
4 жыл бұрын
Hi Deek, I can't find it, so I must had deleted it. All I do is spread a thin layer of super glue under the corners of the blade ends. I did it today for my 22 " as my rubber split so I glued it back and then sealed it. I used quick acting super glue
@DeekMacGibson
4 жыл бұрын
Nice one cheers Bob 👍🏽👍🏽👍🏽
@seantarras9171
4 жыл бұрын
Pined the rubber yesterday gtn a lot btr results bob a lots btr than the unger green clips the channel seems to clog up with the green clips
@polznbladz3242
4 жыл бұрын
I'm glad things have improved. Keep at it and you will be working quicker & better than all your competitors in a matter of days/weeks
@stephenhuskins920
5 жыл бұрын
It would help if you could see it
@polznbladz3242
5 жыл бұрын
Agreed. Eyesight is a wonderful thing
@gmlouieod
Жыл бұрын
Please review your videos before posting. Your camera is not aimed where you were looking so we cannot see what you are actually doing! Appreciate your information though.
@polznbladz3242
Жыл бұрын
For you-kzitem.info/news/bejne/wo-Yr4apbWirmqg&ab_channel=PolznBladz
Пікірлер: 28