This is the best 987 door panel removal video on KZitem!
@robmoreland7461
5 жыл бұрын
Brilliant video! Highly recommend Skar Audio TX65 (6.5") ---> direct drop in / no need to drill / just break off small position post on the inside / solder and reassemble!
@tycoop7867
3 жыл бұрын
Do you need anything else but the speakers to install?
@robmoreland7461
3 жыл бұрын
@@tycoop7867 Nothing else!
@timgage3288
8 жыл бұрын
recommend door trim tool on the top piece (with the mirror adjustment on it) from the bottom, Then it is lifted carefully up and off. not done properly the plastic to hold top in will get broken and can cause a gap, or a slight shake (as seen in video). but no rattle since it is "snug" when the door is closed, but friend with boxter 986 notices a more significant gap than on the 987c.
@bousoukakusei
7 жыл бұрын
I watch this every day
@stewp.3298
2 жыл бұрын
Leave it to the English to deliver a thoughtful speaker presentation, wonderful job.
@mickquinn4781
Жыл бұрын
Great video. thanks and thanks to the comment help also.
@dlewis23
5 жыл бұрын
Great video. Will be doing this shortly to my 987.
@Chitown388
4 жыл бұрын
I wish the video shows the latches and/or clips that were pulled off so that we can understand how things can be detached. In addition, it looks like the stereo is not a Bose system that uses fiber-optic sound signals and not the traditional analog signals for the speaker. In other words, a special kind of replacement speaker might be needed for the Bose system.
@filipmitf
Жыл бұрын
Thanks for the great video. Any idea on how I could find out which speakers would fit my 987 Boxster? Greetings
@user-cz7yp5br4o
4 ай бұрын
감사합니다.
@selfatri8895
5 жыл бұрын
was really helpful thanks very much
@John__Doe__
8 жыл бұрын
Thank you so much!
@barney1352
7 жыл бұрын
Well done ......like vids like this
@mephipps1
9 жыл бұрын
What the speakers that he used. Can you buy these in the US?
@jeffreyroberts7438
Жыл бұрын
Brilliant!👍
@rocapinturesSabadell
10 жыл бұрын
muy buen video felicidades
@1988p911
5 жыл бұрын
This video is invaluable for replacing the speaker or pulling the door panel on a 987 Boxster. The only 2 updates that I'd add are: 1) when pulling the sail panel (1st item, triangular at the top of the door front of the window) only pull the bottom, then once the bottom has popped off, then lift up. The top should be a slot that slides down over a little tab, so don't pop the top of that panel straight out. 2) to remove the round hole cover under the door handle, just press in on the bottom and the top should pop right out. There shouldn't be any need to pry anything out. For the location of the tabs/clips that hold the door panel on, a google image search came up with the following which includes arrows pointing to the clip locations. 4.bp.blogspot.com/-rZ1qJ6GsVeA/WhI0tfamLuI/AAAAAAACDnk/-qyiaxhtUS0HAnxWuckgD6u-Nqv6K4CYACLcBGAs/w530-h328-p-k/doorPanel1.png
@JOATiDetermined
4 ай бұрын
Is yours the Bose or base sound system? Also, I noticed that you have the speaker option that doesn’t have the midtown above the 6 1/2 inch speaker in the door. Anyone here happen to have any advice on replacing that speaker as well as the 6 1/2 half inch?
@OJA94
7 жыл бұрын
Thanks!
@christosmachairas8447
2 жыл бұрын
Good day. Since you replace only the doors' woofers how they co-operate with the existing dash tweeters?? Isnt any problem?
@BrianSullivan
9 жыл бұрын
All went well until the panel removal point. It just won't budge. Maybe if I knew the position of the hidden clips? Any guidance ?
@villaman4818
5 жыл бұрын
Hi..good video..thanks...will use it to help upgrade mine. do you have the part number or better still the link please ?
@user-sv4lx8tw8s
7 жыл бұрын
very nice
@Ernestom5
Жыл бұрын
90rms for the Vibe woofer, what does it mean?
@tanahiro26
9 жыл бұрын
what kind of speakers use for the door, 6.5" or 7 or 8? because 6.5 is too little
@georgew5209
11 ай бұрын
What is the speaker brand and model?
@peterstewart6391
8 жыл бұрын
Have you changed the speakers in the dash?
@adele3078
3 жыл бұрын
Did you disconnect the battery. I read that one should disconnect the battery. Is this necessary?
@darrenwitcomb2056
3 жыл бұрын
Hi. In this case no as it was only the speaker I was changing. In most cases it is advisable to disconnect battery for any electrical work but as the speakers are passive wires and not electrical I did not disconnect battery and helps when re fitting to play radio to test new speaker before the door panel is refitted.
@theonguyen3970
5 жыл бұрын
Porsche's specs said its 200mm = 7.8"?? don't you need a low pass filter?
Пікірлер: 32