Parroting others great video sir. Now, off to fix my buddy's double-ot Box. Thanks chief.
@klassikats
2 ай бұрын
Thanks Kurt
@timtompkins150
Жыл бұрын
It's a pleasure to watch someone who knows the job. Thank you sir
@klassikats
Жыл бұрын
Your Welcome and thank you Kurt
@stevengetz9065
Жыл бұрын
The reason for the zip tie on the regulator is because the PCA Porsche club recommended it as a solution to the problem of the regulator not dropping the few millimeters. They proposed that the problem was caused by cable slack. It is a free possible fix so i tried it. It did not work for me so now ill install the URO regulator. Thanks for this great instruction.
@klassikats
Жыл бұрын
A zip tie will never repair a worn regulator. If there is excessive slack in the cable then the part is just worn out. Kurt
@johnorr7238
Жыл бұрын
Thanks for the regulator stopper tip, that detail saved my project.
@klassikats
Жыл бұрын
Your Welcome Kurt
@zumcrew
Жыл бұрын
Great video… replaced the regulator today without issue
@klassikats
Жыл бұрын
Nice work!
@christophergolden4713
2 жыл бұрын
great video, love the explanations about micro adjustments.
@klassikats
2 жыл бұрын
Glad you enjoyed it! Thanks for watching Kurt
@andrewmichaelcrook340
2 жыл бұрын
Thanks for your help 👍 I 'm about to do the same with my 986 only I have a right hand drive car Australia 🇦🇺
@klassikats
2 жыл бұрын
Glad it helped Kurt
@neiljohnson9537
Жыл бұрын
Great video, thank you
@klassikats
Жыл бұрын
Your Welcome Kurt
@dav44182
Жыл бұрын
Great video! But how do you remove the door handle cable ?? The little white plastic holder at the end of the cable is stuck !
@klassikats
Жыл бұрын
You just have to make sure that you are releasing the lock all the way. If the plastic piece is not coming out then the lock is not being completely released. Kurt
@catobandito6623
Жыл бұрын
My windows can roll down by the button but it doesn’t roll down when i open the door
@klassikats
Жыл бұрын
Then the micro switch on the door is most likely bad. Kurt
@kelleyhagan960
2 жыл бұрын
How do like the URO window regulator? I bought one for the driver's side but have not installed it. Please let me know. I would really appreciate.
@klassikats
2 жыл бұрын
Kelley, So far I have not had any problems with them. It is important though that you clean the window guide channels and also correctly adjust the window to ensure a trouble free operation. thanks Kurt
@kelleyhagan960
2 жыл бұрын
Thanks, I'll keep that in mind.
@zumcrew
Жыл бұрын
Just had to take out a URO regulator … unknown how long it was installed but looked fairly new The slots for the cable closest to the motor came apart
@kelleyhagan960
Жыл бұрын
Thanks for getting back with me. I just installed the URO window regulator about 3 weeks ago on my 986. I've had bad luck with 2 china window regulators. What I know now I would have bought the OEM window regulator for 265 dollars and been done with it. So much of the after market parts today is just complete trash. Hopefully this URO part will last awhile . Just go with OEM parts.
@stevens4689
Жыл бұрын
How do you program the window if the distance is off when opening and closing?
@klassikats
Жыл бұрын
The body module controls the amount of drop. However if the window is adjusted to high the window will not drop enough to clear the seals. Kurt
@departe5672
4 ай бұрын
Hi there!My after I have replaced the window regulator on my Porsche Cayman 987,I have this problem..the window goes up and down if I press on the button like impulse,the micro switch are ok on my car,I have done the test,but if I am pressing on the button for the window to go down, it's not stopping at the edge of the door frame ,it keeps going all the way down,and if I try to get it back up,is hitting the inside door frame,and I need to get it back by sliding a credit card and guide the glass and press the up botton,and all ok,but like I have said..I don't know how to make it stop before it goes all the way down and inside the door, passing the door frame limit...pleas help.Thank you!😊
@klassikats
4 ай бұрын
You are going to have to pull the door panel back off and see why the window is not hitting the bottom stop. Kurt
Пікірлер: 29