If you have a Porsche Boxster or Porsche 996 and your horn honks when braking or turning, or the horn keeps blaring uncontrollably, you may have worn out airbag bracket bushings. You do not need to purchase a new airbag bracket (Retaining Frame 993.347.088), you can repair the bracket by fitting $2.50 worth of #31 o-rings to supplement the worn out bushings. The O-Rings: amzn.to/2qYdBgW
Tools needed to repair the horn:
T30 Torx
19mm Socket
Wrench to disconnect battery negative cable.
If you have a factory radio, you will need your radio code
To make the horn repair, you will need 8 #31 o-rings, they can be purchased at home depot, lowes, menards, etc in the plumbing section, or you can buy them here: amzn.to/23xUacs
Every repair situation is unique. ZipZapDIY cannot guarantee that your repair will be the same as depicted in this video. You should use this video as one information source of many, and you use this information at your own risk. Any tools, parts recommendations links used in this video must be verified by you to be applicable to your situation. ZipZapDIY cannot be held liable for any results from your improper use of tools or repairs. ZipZapDIY highly encourages you to seek out multiple sources of information regarding the repair depicted in this video. There is no warranty expressed or implied warranty or guarantee that you will experience similar results. You are solely responsible for the safe use of tools and equipment during your repair.
zipzapdiy.com
Tools and Parts on Amazon: amzn.to/2on8iab
Негізгі бет Porsche Horn Repair, Horn Honks When Braking.
Пікірлер: 169