Thank You so much for taking the time to make this video. Very inspiring!
@WhatDennisDoes
6 жыл бұрын
This is excellent! I had wondered about extending the rails with another section but didn't know if alignment would be a problem - looks like you got that figured out.
@stephenanderson3056
6 жыл бұрын
It seems to work fine. You have to give it a little extra shove over the joint, but it does not affect the cut. As long as the rails and the wood don't meet at the same place it appears to work fine. I have one question for you Dennis. Where did you get the the bearings for your blade guides. Mine are affected by water. Yours appear to be stainless steel. Thanks.
@woodstockpotter
4 жыл бұрын
Thanks for the video! Nice assembly! Lots of helpful ideas!
@yoseflaurent3376
3 жыл бұрын
Thank you. There are some great ideas in your original design. Video is clear and we see everything well, like you really want to share your plan. Using wood in the tracks is good for lightness and portability. The axle of the tracks'wheels could be made longer for added stability on rough uneven terrain.
@stephenanderson3056
4 жыл бұрын
Some thoughts on improvements on my saw after using my saw for a while. I would lengthen the T on the tensioning handle for more pressure and make the shaft longer to clear the guard. I would also make the tensioning screw from Acme threaded rod as the current thread will strip after a while. I would weld a 1/2 inch socket to the end of the tensioning handle as the nut I used used is already wearing out. This allows the easy use of the torque meter for tensioning. Add extra short log dogs like the Norwood ones. I like their idea. I would replace the 3/4" Ts on the log dogs with threaded hex rods for more control. Any other thoughts you find are welcome.
@1rustytree
5 жыл бұрын
Nice Job!
@jakeowens1770
Жыл бұрын
This guy loves Predator n Pittsburgh more than i do
@sergepaquet3899
3 жыл бұрын
Really great sawmill, id like to have the plans if it still available, thanks Stephen.
@sergepaquet3899
3 жыл бұрын
sorry my email is fpilot172@gmail.com
@walterforsiethe2567
4 жыл бұрын
This would be a good project for me to make with my everlast welder. I've got quite a bit of wood I could put through it.
@stephenanderson3056
4 жыл бұрын
This was my first welding project. If I can do it anyone can. I can send you the plans of you wish.
@stevemiller5901
5 жыл бұрын
DON'T EVEN THINK ABOUT running a saw of this size without a guard. If the blade brakes it will saw your head off.
@maureenwalsh5178
4 жыл бұрын
Dear Stephen, I love this can you please send me a copy of your plans and a parts list. Also, how much did this cost to build? thank you Maureen
@stephenanderson3056
4 жыл бұрын
The cost is about $1000 buying everything new. Send your email address and I will send you the PDF copies of the plans.
@maureenwalsh5178
4 жыл бұрын
@@stephenanderson3056 my email is gonnawin58@gmail.com Thank you so much!
@rusticaio3119
4 жыл бұрын
Parabéns. Muito Boa
@stephenanderson3056
3 жыл бұрын
I don't monitor this site all day so if you requested plans and didn't get them please let me know.
@stephenanderson3056
4 жыл бұрын
I just got some pine logs. I was wondering if there are any special techniques i need to know when cutting them. Thanks
@craigslitzer4857
3 жыл бұрын
I can't answer your question, but maybe this video is a good starting point. kzitem.info/news/bejne/z4Oh12mDbGmAgWU
@stephenanderson3056
3 жыл бұрын
If you have requested plans for this sawmill and have hot received them please let me know. I don't check the site as often as i used to.
@stevetrifon3766
3 жыл бұрын
Can you send the plans or tell me how to buy the kit...satrifon@gmail.com
@chriss8206
5 ай бұрын
What did you use for your blade pulleys
@stephenanderson3056
2 ай бұрын
Iused Grizzley bandsaw wheels
@johnoyoo7838
5 жыл бұрын
Good work my friend. I live and work in Africa,I was wondering how much are the plans I would love to build this in Kenya.
@stephenanderson3056
5 жыл бұрын
Send me your email address and I will send you a set no charge. After my vacation
@johnoyoo7838
5 жыл бұрын
Stephen Anderson thank you very much Mr.Stephen. My email is John.mwatu88@gmail.com
@stephenanderson3056
4 жыл бұрын
I am trying to keep up with plan requests. If you have requested plans and I have not sent them please let me know and I will send them out. Stephen Anderson
@ericaman5393
3 жыл бұрын
Curious how I could get a set of plans for this. Quite the nice build and excellent video! I think your design might be an excellent jumping off point for me. Wikk3dsk4t3r@msn.com
@stephenanderson3056
4 жыл бұрын
Many people have requested plans. If you have and I have not sent them please let me know and i will send them. No charge. If you have received them I am curious to know where they went so if you would like to let me know I would be grateful for the info.
@EOtto
4 жыл бұрын
Could I get the plans please? Thank you Where are the wheels? Thanks from Bavaria Jett1503@web.de Sorry!!
@stephenanderson3056
4 жыл бұрын
@@EOtto The wheels are from the Grizzley tool company in the US. If you cant get them there you should be able to get similar ones there. They have self contained bearings with the drive pulley attached and have metric bearings.
@yasamogu
4 жыл бұрын
красава! спасибо! Balalaika, vodka, medvedi!
@hopechannelcat5462
4 жыл бұрын
just found your youtube site. do you sell plans? if so please let me know, thanks
@stephenanderson3056
4 жыл бұрын
I made the plans to design the sawmill. As they were already created I am glad to send them to anyone who wants them free of charge. They are in PDF format.
@EOtto
4 жыл бұрын
@@stephenanderson3056 Could I get the plans please? Thank you Where are the wheels? Thanks from Bavaria Jett1503@web.de
@danielanderson1396
4 жыл бұрын
Hello Steven can I please get a copy of your plans please... my email is da4530927@gmail..com thanks for your video and my wife said that you look like my dad.... Well I told her that you are a Anderson....
@stephenanderson3056
2 жыл бұрын
If anyone has requested plans and has not received them please let me know and i will send them.
@rickberg3535
2 жыл бұрын
How can I get a set of plans?
@stephenanderson3056
2 жыл бұрын
@@rickberg3535 Just give me your email address an I will email you a set. They are in pdf format
@barrybowman6929
2 жыл бұрын
I would like a set of plans how do I email you I'm not very computer savvy
@stephenanderson3056
2 жыл бұрын
@@barrybowman6929 Send me your email address and I will send you a pdf copy of the plans.
@stephenanderson3056
2 жыл бұрын
@@barrybowman6929 My email address is stephen.anderson58@gmail.com
@stephenanderson3056
4 жыл бұрын
Folks If you have requested plans and I have not sent them it is getting hard to keep track so let me know and I will send them.
@farmboyventures5285
4 жыл бұрын
Hi Stephen, I would like some plans. I have fabricated a carraige and trailer, only thing I'm stuck on is a way to tension the blade, and adjust the wheels. I am running 2 18.75. Great video btw!
@stephenanderson3056
4 жыл бұрын
@@farmboyventures5285 If you give me your email address I can send you a pdf of the plans. Some time in the future I hope to do a blade adjustment and tensioning video so stay tuned.
@farmboyventures5285
4 жыл бұрын
@@stephenanderson3056 thanks Stephen, its Trent.campbell@hotmail.ca, will do, keep up the good work!
@josereis2996
3 жыл бұрын
I need one like this. How much cost one like this?
@stephenanderson3056
3 жыл бұрын
Purchasing all parts new cost is about $1000
@timgiles9413
3 жыл бұрын
Could you tell us where you bought the saw blade wheels ? NICE
@stephenanderson3056
3 жыл бұрын
The wheels are from Grizzly spare parts. You need the wheels bearings and a few misc parts
@timgiles9413
3 жыл бұрын
@@stephenanderson3056 Okay, thank you.
@stephenanderson3056
3 жыл бұрын
@@timgiles9413 I would be glad to send you the plans with the complete parts list if you want. Just give me your email address.
@wilsonholandacavalcante181
3 жыл бұрын
@@stephenanderson3056 can you kindly send me the plans? wilsonholanda@hotmail.com Thank you
@thomasgardner5872
5 жыл бұрын
thanks a bunch
@cochranbm
5 жыл бұрын
I’ve been looking over both yours and Dennis’s and I’m curious if you don’t mind answering: what size diameter tubing and angle iron did you use for the main beam, track rails, and the uppers and all? And, where did you buy the wheels from and the wheel shafts?
@stephenanderson3056
5 жыл бұрын
I created a complete set of drawings and parts list for my sawmill while I built it. I'll send you a pdf copy if you would like.
@cochranbm
5 жыл бұрын
Stephen Anderson yes, that would be awesome and highly appreciated!
@everey3819
5 жыл бұрын
Hi would you be able to send me that pdf as well?
@everey3819
5 жыл бұрын
I was thinking about trying to build one capable of a 48" cut. Do you think that same 6.5hp harbor freight engine would do the trick, or you think I'd need to step it up? I also wasn't sure if there's a science to the size of the blade wheels.. if a bigger blade needs bigger wheels, or if I could just use the same wheels spaced further apart
@stephenanderson3056
5 жыл бұрын
Sure. When you get it done send Dennis and I a picture or video. Just tell me your email address so I can send the set of drawings.
@stanhorton9581
3 жыл бұрын
Can I get the plans?
@stephenanderson3056
Жыл бұрын
If anyone wants plans please let me know. I don't get to this site often to check requests. Send me an email at the address below. I am working some minor improvements and I will try to document them here also when I get them done.
@stephenanderson3056
5 жыл бұрын
To those folks I send drawings to: I thought I had included the parts list, but I didn't. If you want one let me know.
@TheDeniseennes
5 жыл бұрын
Send to me? diegors100@gmail.com 😀
@davidmiles
5 жыл бұрын
What do you estimate the cost of materials to build this is?
@stephenanderson3056
5 жыл бұрын
buying everything it cost about $1000
@intertanmintchanel8494
Жыл бұрын
please send ma plan of this sawmill
@stephenanderson3056
Жыл бұрын
If anyone wants plans just email me at stephen.anderson58@gmail.com and remind me you want plans. I usually reply within minutes of reading you request otherwise I forget.
@rmsumner
Жыл бұрын
Can we still get plans?
@stephenanderson3056
Жыл бұрын
Sure, just send me your email address at stephen.anderson58@gmail.com with the request so I remember what you want and I will send a pdf set to you . No charge.
@oldoldpilgrim7898
3 жыл бұрын
TKE?
@scor440
Жыл бұрын
Where gloves and he doesn’t ?
@stephenanderson3056
3 жыл бұрын
On vacation will send plans next week
@timgallagher7486
3 жыл бұрын
Awesome
@muttdawg61
5 жыл бұрын
Although a great video and build it’s a stretch to call that mill anything remotely close to being “portable” I can think of many other ways for the portability to be more practical
@priyatoshdebbarma6064
4 жыл бұрын
I want to this machine
@brianwalker2112
Жыл бұрын
Do you have plans.
@stephenanderson3056
Жыл бұрын
yes, I would be glad to send you a pdf set if you wish. No charge. The only fee is to tell me approximately where in the world you are. I have sent them literally around the world so it is fun to see where they went.
@stephenanderson3056
Жыл бұрын
Here they are
@FredFlowersCorozalPride
4 жыл бұрын
Looking for all the help I can get I was trying to purchase a sawmill to ship back to my country bellies central America but cannot afford a brand new one is there anyone on here that can help me to build one or at least to acquire the parts needed that I can ship back to my country just need to know the names of the different parts that I could maybe go and purchase at a Home Depot or other mail or store that sell these type of equipment
@stephenanderson3056
4 жыл бұрын
Could you send me your email address so I can send you the PDF plans and parts list for mine for this one
@AI_KENOBI
4 жыл бұрын
Do you sell these sawmills?
@stephenanderson3056
4 жыл бұрын
No Building one was enough fun.
@mintheman1
4 жыл бұрын
@@stephenanderson3056 I was wondering if you would email me a copy of your plans I would like to make a mill like the one you made my email address is (manishspurrell@yahoo.com) I really enjoyed your video
@morgansword
5 жыл бұрын
I know your brave but to no check all bolts on this machine is close to suicide to me as blades break even though they are new. The saw is running and you tighten the guide block and if the blade binds then snaps it will coil faster than a rattlesnake and this one can kill on the first bite. I am not sure how I did it but I watched to the end and I watched you make so many mistakes that osha would lock you up for your own protection... Maybe not osha but if someone watching sees you do it and then they get hurt when they try, good luck with home owners insurance. Those welds won't take the vibration that will eventually hurt or kill someone., no need to harp at you, it is already done.
Пікірлер: 138