this is a top 10 video for flight simmers wanting to start out in great shape.
@Perspectologist
3 жыл бұрын
This is awesome. I’ve been wanting to get into flight simulator. I would want to use physical controls so this approach is very appealing to me. Thanks for sharing.
@mvukkaz4899
3 жыл бұрын
Good save at 4:34 Suzie!!! Looks great.
@paulangus715
3 жыл бұрын
Fantastic result @Mark Susak!
@TheGbow0704
3 жыл бұрын
Very cool Mark
@Stoney3K
2 жыл бұрын
Honestly, that handheld router is one of the best tools to have on a battery, because you're always having to use it in awkward corners. Also, that duct tape will leave some nasty sticky residue if you remove it. That's the downside of it holding everything in place so well.
@MarkSusak
2 жыл бұрын
I would have to agree. Circular saws you can manage, but for a smaller trim router for corners, curves even indented work, cordless is fantastic
@Bill.L.Carroll
3 жыл бұрын
Well done mate, even if there was an obscene amount of glue used! 😉😆 Now, to quickly whip up a riser for the monitors. 👌🏽 Looks great. 👍🏽
@homeworxchannel4120
3 жыл бұрын
Excellent idea. I have two set ups one for dcs and flight sim! This would work perfect! Glad to see another flight sim and woodworker! Will have some more flight controller cnc stuff on my channel!
@homeworxchannel4120
2 жыл бұрын
@G us are you on discord?
@flybobbie1449
3 жыл бұрын
I built a laptop sim. Metal box same size as laptop, two inches deep. Got old tomahawk control wheel. Alternat cut a broom handle. Attached to cupboard clothes rail 1 inch dia., used it's mountings as the two bearings. Inside bungy cord. The Leo bodner usb module. Used it's analogue inputs for pitch roll throttle mixture, trim, using potentiometers. Toggle switches for other inputs.
@jeffvijn5338
Жыл бұрын
Tx Mark, splendid advice. After viewing your video I plan to build me your portable cockpit, incl 2 saitek panels (switch and ap) . And after the vid of George Findlay also on youtube i went for the IpadMini 1 on dutch Marktplaats. Now proud owner of 3 of them ipads, for ca € 30 each, and the remote flight bundle installed. The 3 ipadsM also in your cockpit. Tx very much ! grtz Jeff, The Netherlands
@nothsim
Жыл бұрын
Great job.
@atefxf
2 жыл бұрын
Once you got the flip-top out it was like a light-bulb was being lit inside of my brain xD I was like, *_ooooooooh that's where I know this dude from haha_*
@MarkSusak
2 жыл бұрын
Haha thank you :)
@PanRider939
2 жыл бұрын
Wow that's neat. Note, if you use one of the cockpit instrument panel apps on your tablet in place of where the maps are sitting, you don't need the cockpit view on your monitor. Lift your monitor up level with the top of your cockpit, and get more visuals.
@JenniferinIllinois
3 жыл бұрын
That's an awesome portable cockpit setup. I'm trying to figure out what to do about my own cockpit.
@kenz122933
Жыл бұрын
Excellent !
@codingvio7383
3 жыл бұрын
He buttered that landing.
@djtaylorutube
3 жыл бұрын
Nice. Not sure if you've noticed but the bottom of the yoke has some threaded inserts that you could have screwed into from below. I'm going to have to do something similar and had been thinking about what to do because I have the same scenario and ideally, want to just plug in one USB cable and not have to keep bolting individual bits to the desk and disassemble afterwards.
@jerryheritage
3 жыл бұрын
The main point is whether it works a not, not so much about the messy wiring. Even if the wiring is going to be neat but things aren't working, what is its use? This cockpit is awesome! love it!
@TheGbelcher
2 жыл бұрын
Well done, sir.
@cappyky
3 жыл бұрын
Good to see you using a push through tool on that table saw.........too many "big shots" can't go bowling anymore.......good for you brother. +++++ AND AGAIN.....do not reach over a spinning blade...LET IT DROP......it's not going to run away......Great project!
@triforcegamerz7150
3 жыл бұрын
Thumbs up for the whisky🥃👍🏼👍🏼
@Charlie_Echo
2 жыл бұрын
Cool build! Thanks for sharing
@papagen00
3 жыл бұрын
even more portable -- laptop + VR headset
@IowaHammer
11 ай бұрын
Love it!
@helicopterovirtual-msfs6254
4 ай бұрын
Fantástico.
@zodjenkins2595
3 жыл бұрын
all set up! nice one
@georgesmith651
8 ай бұрын
Very nice build, can u say what is the device with several keys positioned above the yoke, thanks for your video.
@TheDakRadz
Жыл бұрын
You did great on the actual, bigger wood pieces during kerf bend cutting, but the way you grabbed for the smaller test pieces rather negates the pushblock you used for safety Just a helpful suggestion, as "Ol' Ace 9 Digits" isn't much of a callsign 😉
@Millisekunde
2 жыл бұрын
yeah, great job
@shauncb
3 жыл бұрын
I don't comment on much, but this was nice my dude.
@caioviniciussantosesilva4872
2 жыл бұрын
Awesome job mate!!
@rampasture
3 жыл бұрын
do you have a material list for the buildout?
@CRAZYHORSE19682003
2 жыл бұрын
Can I recommend wall mounting you main monitor so it is above your cockpit. We have the identical three pieces of gear, yoke, MFD panel and switch panel. I would love to make something like you have to hold everything. I would lve to see a demonstration of how you use your stream deck with flight simulator, it might be something I would be interested in getting. Check out my setup and let me know what you think.
@LTDigital
7 ай бұрын
Is the completed cockpit sitting freely on your desktop? If so, doesn't move when you pull on the control yoke?
@Kannofant
3 жыл бұрын
Excellent idea *TOP*
@twitchprojectx932
2 жыл бұрын
ohhh, did not know you could use the streamdeck with xplane.... makes sense that you could, though....
@VaupellGaming
2 жыл бұрын
Nice!
@kiyanoroudji9499
2 жыл бұрын
Hi how did you get the 2nd monitor above to show the map?
@philemonboileau4258
Жыл бұрын
what are the measurements (width and height)
@-knight-7008
3 жыл бұрын
i love it
@Lindastyle
3 жыл бұрын
HHAHAHAHA he's gonna bend wood. Like that won't snap or something... oh wait what?! That's a genius way to bend wood. 😱
@lukebraddford3287
3 жыл бұрын
What you built looks fantastic, what's the map your using on the second monitor
@davislegal
2 жыл бұрын
Hey Mark, what measurement are the spacing for the cut marks? I'm planning on doing the same thing.
@SANDERVANDERVEEN_
3 жыл бұрын
that looks great, but you barely see anything on your monitor this way I guess?
@johncrichton4341
3 жыл бұрын
Hay Man - really nice setup - love that you made it yourself! BTW, what are your desktop speakers called??
@MarkSusak
3 жыл бұрын
Thanks! They are from Edifier, not too sure of the model though. They are pretty good. I was using the Logitech range for years. So happy I bought these
@stevegarrett9533
2 жыл бұрын
What flight software are you using?
@clausfrlund6092
3 жыл бұрын
Fine video but someday you will be loosing a finger on that saw.
@Deniskamir
3 жыл бұрын
What is iPad iOS app you use for MSFS2020?
@WarriorPleb
3 жыл бұрын
good effort mate, where do i get one? ;)
@gabiitou
3 жыл бұрын
What are the dimensions
@iseverynametakenwtf1
7 ай бұрын
how is this a wood working channel?
@homeworxchannel4120
3 жыл бұрын
So did you have to do anything with the landing gear panel to get it to work. I cannot get that thing to even show up on my computer. Have downloaded the drivers for it and everything. Any advise? Maybe I got a bad one?
@MarkSusak
3 жыл бұрын
I was experiencing the same thing. You have to download a very small driver from the Logitech website for this to work on FS2020
@homeworxchannel4120
3 жыл бұрын
Yes I did download it and it's still not recognized in the computer. I'll probsbly send it back. I originally was going to use it for DCS and what a pain to set up. I recently started 3d printing so ill probably try to create my own instead.
@homeworxchannel4120
3 жыл бұрын
Thanks for the quick reply!
@simonw2631
2 жыл бұрын
They yoke is almost in your face. Go sit in a cessna and base ur setup off of that.
@ryleedx1209
2 жыл бұрын
tutorial is so hard
@TGabrielTPOI
2 жыл бұрын
Use double sided tape.
@stilldre7739
3 жыл бұрын
that blocks half of your monitor
@mr-matt2881
3 жыл бұрын
2:00 AHHH PLEASE don't reach over the blade like that again
@cappyky
3 жыл бұрын
YEAH REALLY!.....LET IT DROP.
@alonsoquijano9555
3 жыл бұрын
I thought exactly the same.
@kylesorensen753
3 жыл бұрын
I loved your video your good keep it up 👍 I also make KZitem videos if you want to check it out 😃
Пікірлер: 68