You, sir, are an outstanding teacher. I know you're likely far away from retirement, but I would hope that when that time comes, you would consider perhaps teaching in a trade or technical school to share your knowledge with younger people going in this direction. You would be an outstanding mentor! 👍👏
@tinmanssaws
3 жыл бұрын
Morning buddy, thanks for thd kind words!!
@richp1146
3 жыл бұрын
Well said. I agree. The Tinman is a great teacher.
@Cholton222
3 жыл бұрын
Yea and when he can't teach' or they don't listen, his ogre azz can bonk them on the head. J/J tinman no offense. Lol
@timgordon6160
3 жыл бұрын
That saw has a beautiful sound to it!! You swear it’s a 70cc saw!! Great job man can’t wait to see back up against the 562!!
@simpleman4224
3 жыл бұрын
That jewel sounds great! Have a great weekend buddy! 👍👍👍👍🇺🇸🇺🇸🇺🇸🇺🇸🙏🙏🙏🙏
@clutch5sp989
Жыл бұрын
Just bought this saw new yesterday. It's a monster. WHY in the F would someone think they need more? I think it's just to say you f'd with it and save 1-second making one cut maybe twice a year when a tree fell.
@fredmetcalf
3 жыл бұрын
If I was using a saw to really do heavy duty firewood or timber cutting, I wouldn't do what I did upgrading the CS-590. I would buy a CS 620 or maybe a larger saw, a pro saw instead of something to upgrade. You can't make a CS 590 in to a CS620 for anything near the price of a CS 620......or maybe a Husqy. I'm retired from working 37 years as an electrical engineer and I have a lot of discretionary time and a little discretionary money and sometimes I just need something interesting, challenging, gratifying to do.....I enjoy watching Tinman for the same reasons all of you do and sometimes I just HAVE to do something like what he's doing. I can't do heavy work like I used to but I still have a lot left in me to do things in more moderation. I've had a lifetime of doing electronics and projects so for me chainsaws are a good blend of the mental and the physical yielding a gratifying result/experience. I can use my Stihls and Husqys and give the ones I build to my sons and daughters for use on their properties....and sometimes a friend will need a saw and I can give him a saw or a good deal on one......retiring is not the thing many folks think it is. I just have to have something useful and creative to do....doing nothing is misery for sure....
@HawtSawz86
15 күн бұрын
Hey man, How are you doing in retirement now? Wishing you all the best
@stevetrachsel8690
2 жыл бұрын
You are a positive and uplifting man. I appreciate you patient explanation of how saws work. Keep the videos coming! God Bless!
@dentondunn4346
2 жыл бұрын
Why did u pull the cord before shutting it off?
@supersportryder
Жыл бұрын
I'm an infamous motorized bike guy in my neighborhood, a fellow gave me this saw to try to get started for him. I found the kill switch bad, and disconnecting the wire from coil gave me spark. This saw is hard to pull and you sir are a beast and make it look easy.
@polar330
3 жыл бұрын
Have a feeling that saw will be in a whole new league compared to stock
@hikemoreh96pro
3 жыл бұрын
great job! I love the cs-590
@themanchannel8761
3 жыл бұрын
Nice work, Tinman! That saw sounds knarly! Now, to get it in the wood....
@SonOfLiberty1984
3 жыл бұрын
Thats one of many things I love about this channel. You get to see every saw in the wood! You get the bench talk and the chips to back it up!
@tazman-kennyfuller
3 жыл бұрын
Man that thing sure has a unique sound to it. Super cool. Great work friend. Thank you Tinman for sharing this assembly. Love it 🌲❤🌲✊🪓
@j.chrisbeck7492
3 жыл бұрын
Great video Tinman, keep it rolling buddy. I will be watching.
@TheOneinjun
3 жыл бұрын
I really enjoy your videos !! your a great teacher !
@paulsilvestri593
3 жыл бұрын
Why in the heck would someone give this video a thumbs down??? Tinnman you are a kind soul and really care about your customers. I love your passion for power saws. Please keep up the great work and content.
@gregwinger6717
6 ай бұрын
Are you the guy bucking Bill always talked about
@tinmanssaws
6 ай бұрын
Yeah thats me
@mikeremski2102
3 жыл бұрын
So never get your wife a vacum cleaner for Christmas, get her a chainsaw. Good stuff; thanks for sharing with us.
@jstocker1103
3 жыл бұрын
I don’t think I missed this in the video but how long do you let the motoseal set up before starting the saw?
@davep6286
3 жыл бұрын
Sure sounded zippy, look forward to seeing it in the cut. Thanks for sharing 👍👏👏
@Casaperformancechainsaws
3 жыл бұрын
That thing does sound like it will rip! Quick question Tinman, will it hurt the liquid gasket if the saw runs before it’s dry?
@DaveyBlue32
3 жыл бұрын
That’s going to be sick! Love the kackle!!! She’s a bad little bitch now!!!! 24” bar!!! O’ yeah!!! She’s no longer a 590! Needs a duct tape sticker with 652 on it!!! LMFFAO!!! Sweet build!!!
@CharlesBrisco
3 жыл бұрын
Has that ported cs590 sound for sure I'm running a lightend up pop up in my 590 build it has less compression then it it did stock or what my s620s have but seems strong in the cut can't wait to see this one in the wood keep having fun it's what it's all about
@livewithnick
3 жыл бұрын
……
@timothybyrom5560
3 жыл бұрын
On cylinders I use lions head, or Indian head gasket shellac.
@erichess5566
3 жыл бұрын
ok, ignorant question...why do you pull the recoil starter out a bit when killing the engine?
@tinmanssaws
3 жыл бұрын
It lessons wear on hard to get starter parts.
@dentondunn4346
2 жыл бұрын
@@tinmanssaws Should I do that to my brand new CS590 I just bought everytime I shut it off, I haven't even used it yet but is that a good idea
@fredmetcalf
3 жыл бұрын
I dropped the base gasket, raised the exhaust to 105*, opened the transfers as much as is realistic, put the 620 carburetor on, added the new 620 ignitor, opened the muffler completely (and the the deflector) and added a coarser screen for a little backpressure and some spark protection. I did all this right out of the box (never ran it stock) and after I got it started and retuned, she runs great and sounds good and is smooth running, excellent instantaneous acceleration.......now, break it in and see how she cuts wood....$375 for the saw no shipping out of Antioch, TN.....$79 for the ignitor, $89 for the coil....paid tax on it all but no shipping....appreciate you and your insightful explanations and sharing your "ancient Chinese secrets",,,,you are a talented instructor and easy to understand....as they taught us in the Army: "....tell them what you're about to tell them; then tell them what you need for them to know; then tell them what you just told them...." You're a good man, Charlie Brown.....
@johnwills4655
Жыл бұрын
Thanks for the videos I just picked up the exact same saw, was used about 10 minutes and they burned the Piston up they didn't have any oil in the fuel. Hopefully I got enough sense to fix it lol
@susanhershey7107
Ай бұрын
thank you for this! I had to replace my handle/gas tank and could not figure out how to get it off. That screw was the key!!
@larrybollinger7319
3 жыл бұрын
Can't wait to see it in the wood. I look forward to Friday night all week.
@2010stoof
Жыл бұрын
Why do you pull the rope before shutting down the saw? I'm sure someone knows and you've already said lol
@neallee103
2 жыл бұрын
To bad you don't have a stock cylinder to put back on and see if it has the same problem. Might try moving the coil away from the flywheel a few thousands
@JamesTaylor-nd2wq
2 жыл бұрын
I have a 372 xp I live in Sudbury Ontario I’d really like to get it ported I love your work you really know how to make power would you be interested in doing it for me ?
@ejsocci2630
Жыл бұрын
I really enjoy your videos.awesome brother
@h200z
3 жыл бұрын
I retro torqued my stock 371xp and it showed 62 inch pounds for the cylinder bolts .. I'm felling up to no more then 65 inch pounds.. Oh course spell check substantiated my life time membership to the moron nation..
@CuttinInIdaho
Жыл бұрын
Toyota has a sealant called FIPG form in place gasket that is amazing
@ikesquirrel
2 жыл бұрын
I wash saws in the sink too. The wifey is fine with it. Hot soapy water and a toothbrush. Motoseal is awesome. I think the sealers are all the same too.
@joshuadavis2470
3 жыл бұрын
Really, with as many saws as you build you don't have a piston stop?
@metalted6128
3 жыл бұрын
Sure he does,, but the rope covers more surface area on piston ,for torquing against.
@justinweaver8787
3 жыл бұрын
Sweet saw i believe it will be a lil demon. Have a good weekend buddy.
@zeromark202
3 жыл бұрын
Was this the last cs590 build video upload?
@stevetheriault4164
3 жыл бұрын
FRIDAY NIGHT IN THE SHOP✊✊✊✊✊LOVIN THE CONTENT TAKE ER EASY ,,GREAT JOB TINMAN ,,HAVE A GREAT LONG WEEKEND EVERYONE
@k-techcowboy4260
2 жыл бұрын
Why do heat cycles? Did you put new ring on piston?
@ejsocci2630
6 ай бұрын
I really enjoy your videos and the way you do your videos.
@gregwinger6717
6 ай бұрын
How much for a ported muffler for my 450
@joshholbert9120
Жыл бұрын
Damn that saw sounds terrific!
@neallee103
2 жыл бұрын
Ser clip laying on table hope that's an old one not one that was supposed go into the saw
@richardsiegfried9423
2 жыл бұрын
Great job tinman. How about working on mine😁
@Matt-mq1ep
3 жыл бұрын
Sounds great! I have the same saw, would love to tweak it, but hate to screw something up lol
@kingfisher3807
3 жыл бұрын
Tinman was that the wrist pin retainer I saw sitting on the paper towel with your assembly parts after you installed the cylinder?
@stevetheriault4164
3 жыл бұрын
NEVER SEEN YOU INSTALL CIRCLIP ON CLUTCH SIDE ,,SEEN IT LAYING ON YOUR PAPER TOWEL
@metalted6128
3 жыл бұрын
He clearly said piston was already installed, he was just demonstrating the thrust washers. You must have took parts of video and not the whole video???
@akdjcakjcnc
2 жыл бұрын
I'm in nyc is there anywhere i can take my saw to get ported?
@SOHN32
3 жыл бұрын
What kinda Beard oil you use.
@Slim1423
Жыл бұрын
How long do you think the Echo CS 590 will last in years as compared with a Stihl saw? Just wondering. I have neither brand of chainsaw, but i like what I see of the CS 590, which seems like a quality saw. Also, are parts easy to find for the CS 590?
@cygnus1965
Жыл бұрын
I would think with a quality oil and decent fuel the same amount of time.
@dolansontag3731
2 жыл бұрын
Dishwasher on hot rinse works great shhhhh lok
@waynestewart6492
5 ай бұрын
Thanks for the tips bro!
@mikahakkinen5651
3 жыл бұрын
its sounding good,little bit tuning on that carb and its good
@BenoistChivot
9 ай бұрын
Salut donne moi la version en français stp
@andyjones6361
2 жыл бұрын
Oil is cheaper than Metal!!
@jasonmercer9962
3 жыл бұрын
Sounds mean now. Can’t wait to see it in the wood.
@brijaysikes
19 күн бұрын
Any crankcase oil?
@matthewscantland85
3 жыл бұрын
That thing sounds nasty
@no.step.on.snek.2423
3 жыл бұрын
Thing snarls as it idles
@hickerbilly345
3 жыл бұрын
Sounds like it's only running on one cylinder
@davewilson7565
3 жыл бұрын
Great work as always Tinman 👍🏻
@richp1146
3 жыл бұрын
Great job again Tinman! So nice to see a common saw that is readily available to a land owner being built to perform like a pro saw. My nephew owns one, and I might just copy your build and surprise him. 💪
@tinmanssaws
3 жыл бұрын
Morning Rich
@larrywarner9314
3 жыл бұрын
I see a circlip on your bench ??
@jacobmeis1249
3 жыл бұрын
fires fast
@paulhenry1011
3 жыл бұрын
Hi tinman a like that you do all kinds of chainsaws. Keep up the good work buddy... Form 🏴...
@henrikpanczak6312
3 жыл бұрын
Man that baby sounds reeeealy grumpy!! Nice work! And I love your safety flip-flops :-) Greetings from Germany!
@travisweldmaster7815
3 жыл бұрын
Ol red permstex high tem gasket maker..no problems yet. Yeah ring compressors are overrated too lol never had any and no problems there either, DOWN AN DIRTY BABY!
@marcduclos9789
3 жыл бұрын
My #1 man 48-year-old retired navy ---- agreed to be on my KZitem operating my 70cc still chop saw. He talks like you. It is refreshing.
@ChevyGuy70
3 жыл бұрын
That settles it I’m going to have my saw sent to you when I get the money and if you’d be interested in porting another CS-590 😂. I currently pull a 24in bar on mine stock and would love to improve the power. Love your content😎👍
@jasonslade1253
3 жыл бұрын
Sounds like it’s four stroking a bit. Is that what you mean when you say it’s running rich! Do those saws have carb adjustment screws?
@aaronpowell4885
3 жыл бұрын
Thanks again for sharing with us! That echo does sound meaner. I got a CS-590 last week, funny how the limiter caps fell out and the muffler and it's deflector suffered some weight loss within the first tankfull🤔 Checked squish in 4 spots .0410 to .0415 probably losing the base gasket this weekend. Looking forward to how it responds in the wood!
@mesanders1113
3 жыл бұрын
Be sure to run higher octane I bet it opens it up some
@tylerdrummond4609
2 жыл бұрын
Amen brother about learning the hard way! Truth is when you think you've learned it all you''ll get schooled quick by the old fellows! I personally use the trial and error method but i also like to learn other people perspectives on it! Sometimes there is no right or wrong way of doing things, just harder or easier methods ( except porting/timing that's an art in some cases)
@traceanderson4010
3 жыл бұрын
Hey I was working on a husqvarna 50 and I didn't see a spot on the carburetor or the tank so I'm really confused got anything
@codyroger9581
3 жыл бұрын
Did final assembly of my fully rebuilt 266 today. Only watched your video 5 times lol. Where do you get your 266 fuel lines from?
@4.0gpa44
2 жыл бұрын
Does a good porting job like this one decrease the saws lifespan? If so, how much?
@travisweldmaster7815
3 жыл бұрын
Lol I was just joking mine doesnt care hahaha, read my comment on harvey ? Lol
@BWGpolishing
3 жыл бұрын
Great job! Top notch build! Did you measure how much you raised the exhaust port? And would you share measurements??
@larrykluckoutdoors8227
3 жыл бұрын
I have a 590 and would not mind having that done. Nice job 👍
@mapleridgeoutdoors4136
3 жыл бұрын
I’d love to send you my 385xp and let you go to town with it. She needs the tinmans touch!
@stuartramage5933
3 жыл бұрын
Nice job tinman. Peace. Going to do some wood carving and let a saw tick over love the smell of 2 stroke
@Naulabasterd
3 жыл бұрын
Odd choice by Echo here, no rim sprocket. Stock 501 got one.
@adrianlupu3316
3 жыл бұрын
Super lucrare👍. Salut🤝
@KK-dt4gj
3 жыл бұрын
It would be funny and cool if you would port that little homelite xl2!
@BourbonDrinker
3 жыл бұрын
Do you have crickets in the shop?
@tylerdrummond4609
2 жыл бұрын
i've got a couple questions for ya! im into 2 stroke but new to saws, what's the second hole for in the dome? also have to ever had issue with using to much gasket maker and having it big a rig/lip in the port? on the 500cc 2 strokes i build, ive noticed it everytime, some of it even works its way through and out the exhaust, have you ever had issue with it getting caught in a ring and burning up?
@tylerdrummond4609
2 жыл бұрын
oh you answered the first question right after i un paused it! decomp! now I'm assuming it only gets triggered upon initial start? I'm sure you'll answer this literally after I un pause it again lol
@johnarnettsways.8758
3 жыл бұрын
Great work as usual. Stay safe buddy.
@Piledriver2235
3 жыл бұрын
Looking forward to seeing it cut. Sounds great
@daphlavor
3 жыл бұрын
She rips alright, can’t wait to see it in the wood 🪵 ✌️
@rodneyyazzie3739
3 жыл бұрын
Wow, I love this saw, no words for this, it sounds awesome and the powerful.
@timothybyrom5560
3 жыл бұрын
EXACT torx bit set I've got.
@robertpatterson7182
3 жыл бұрын
I have the timberwolf and love it
@jeffreyrubish347
3 жыл бұрын
Looking forward to seeing it cut!
@mrxlh
3 жыл бұрын
That saw rips, cannot wait to see it in the wood!!!
@Cholton222
3 жыл бұрын
Awesome job dude. I may not always comment but i always watch your videos. Bsafe dude.
@Cholton222
3 жыл бұрын
I have a poulan top handle climbing saw. Its a 25a automatic. Was wondering if you would like to work your magic so i can ise it in the tree. You can have it on a video perhaps. And yes ill pay u. Lol. Bsafe big'fella
Пікірлер: 130