Another great video Reza, will be directing all the folks who want to start using Power Automate here! I watched another video recently talking about trigger conditions and they had a great tip of using the filter array option to build your trigger condition expression, really simple and switching from basic to advanced view gives you the trigger condition expression you need (including the @)
@RezaDorrani
2 жыл бұрын
Awesome, thank you! Your 💡 is awesome as well.
@Worrelpa
2 жыл бұрын
That Video was by Damian Bird. Really useful trick to get those trigger conditions worked out.
@robofski
2 жыл бұрын
@@Worrelpa yes it was, I like a lot of his stuff!
@DamoBird365
Жыл бұрын
Cheers guys - appreciated 👍
@jameslawrence9665
Жыл бұрын
He does a great job - gets right to the point - doesn't waste any time - very concise - very knowledgeable.
@RezaDorrani
Жыл бұрын
He says Thank You :)
@MaddMaxOfficial
Жыл бұрын
And his mic quality is actually good! Unfortunately so many of these talented developers making content have thick Indian accents, although they can’t help it - this makes it hard to understand coupled with bad microphones its doubly difficult to comprehend the great info they teach: shout-out Reza! 💪🏼
@ellios3732
2 жыл бұрын
Almost a year later after this video and you're still helping out beginners like me. Thank you, Reza!
@RezaDorrani
2 жыл бұрын
So happy to hear that
@ashleyprobert721
2 жыл бұрын
Hi Reza. I just had to share this with you. I used your video named "Power Apps Save Pictures to SharePoint - Camera Control Tutorial" . The comments were turned off, so I am using this video's comments section. Whenever I wanted to submit the attachments I kept on getting a warning that the "Id" was needed for the form submit. It took me nearly 5 hours of swearing and crying to realize, after watching your video over and over again, that I had used "ID", instead of "Id" in the JSON schema. The warning message was telling me the fault all along. Now I am laughing at myself. Thanks for all your help, I and I sure many others, really appreciate it.
@RezaDorrani
2 жыл бұрын
Thanks for sharing the details Ashley. Glad to know it worked :) The comments are turned on for that video. I have a lot of recent comments on that video.
@cvkealey
2 жыл бұрын
Thank you for FINALLY explaining the use of the ? in traversing json! I've seen/read dozens of blog posts or videos where they just give the notation without explaining it.
@RezaDorrani
2 жыл бұрын
Glad it was helpful!
@robertoel-hajjboutros
2 жыл бұрын
Best Power Platform Developer ever, thank you for your amazing videos ❤️
@RezaDorrani
2 жыл бұрын
Wow, thank you!
@HareKrsn213
Жыл бұрын
Honestly - Whenever I face any challenge anywhere in Power Platform, Preferably I always look for your videos because of you pick complex tasks in your videos which covers other multiple scenarios....You helped me a lot. Thank you Reza...Cheers!
@RezaDorrani
Жыл бұрын
Wow! Thank You so much for watching and learning from the videos. Much appreciated.
@jameschisolm8475
2 жыл бұрын
Thank you sooo much!!! I'm not even sure you realize how helpful your videos are. You have a multitude of tips and helps in this video alone. I've been struggling with 1 thing... I was not able to see the add dynamic content/expression editor button. After trying several things and numerous searches, I was feeling defeated. But you casually mentioned it in this video. I am grateful! That's only 1 example. There are many more!!! Thank you!
@RezaDorrani
2 жыл бұрын
Wow! You are most welcome! So glad to hear the video is useful and packed with content.
@sergiizelenko4114
2 жыл бұрын
Amazing video! Thank you so much!!! I was searching for a good content that explains how to build expressions for months and finally found answers to most of my questions in your single video :)
@RezaDorrani
2 жыл бұрын
Great to hear! Thank You so much for watching.
@dougydoe
2 жыл бұрын
Excellent tutorial. Very timely as I'm currently working on flows where I'm having to use a lot of expression. Thanks for sharing.
@RezaDorrani
2 жыл бұрын
Glad it was helpful!
@Worrelpa
2 жыл бұрын
Thanks Reza, a gold mine of information there as usual. I struggle with the new editor, I probably just need to get used to it and practice more. Always find myself going back to the classic one. Sure the expressions are harder to edit, but I drop them out to an editor first then copy paste them back in. Something about that makes it easier to compare expressions and see those silly errors. Quotes, comma, brackets missing etc. One of the things I have started to do with expressions is when I have collected data is to create an array of items I need and use on the flow. Then inside that array use expressions to do any conversions or processing I can do against them to save on compose and variable steps. e.g. from SharePoint get item, take any date / time fields and convert into various formats and have them as their own items directly further down the flow. With those items I also add expressions inside If(Empty(Item), 'no value', converttimezone) etc In cases where fields are not required fields to avoid some failures. Looking forward to the next one. This video will be in my video reference library. ;)
@RezaDorrani
2 жыл бұрын
Thanks Phil. Your tips are awesome!
@365g
2 жыл бұрын
Massive thanks Reza! - I always found myself going back to the 101,201.... series you had done w/ Jon L.... but I now have new supercharged, super-concise reference for PA expressions!.. With a vast array:) of excellent use cases - Well and truly bookmarked! 🔖
@RezaDorrani
2 жыл бұрын
Thanks Gerard. Goal was to make a one stop shop video and cover all aspects of expressions with real world use cases.
@pw.70
3 ай бұрын
Reza, you have shown me so much and answered many questions - thank-you!
@RezaDorrani
3 ай бұрын
Most welcome
@jeremieduplessis-savard9557
Жыл бұрын
This is 30 minutes of gold
@RezaDorrani
Жыл бұрын
Thank You
@muhammadusmankhan5284
2 жыл бұрын
Absolutely awesome, no one can explain that better than you.
@RezaDorrani
2 жыл бұрын
Thank You 😊
@snorrefjeldbo5604
10 ай бұрын
Excellent! Exactly what I was looking for. Thank you!
@RezaDorrani
10 ай бұрын
Great to hear!
@fortube
2 жыл бұрын
Qualitative sharing… 🙏👍
@RezaDorrani
2 жыл бұрын
Thank you! I love the word "Qualitative".
@arshad801
2 жыл бұрын
Thanks Reza for sharing your knowledge..please keep up the good work you are doing for the community.
@RezaDorrani
2 жыл бұрын
My pleasure
@zhuoshentan
2 жыл бұрын
Thank you very much for such detailed explanation step by step! 👍
@RezaDorrani
2 жыл бұрын
You are most welcome!
@devinemichae
2 жыл бұрын
Thank you Reza, I had lost my expression builder and could not understand why. You showed me that my browser resolution was too high, it was driving me nuts.
@RezaDorrani
2 жыл бұрын
👍
@laszlogyor6628
Жыл бұрын
It is a very useful video for me. Great job. Thank you.
@RezaDorrani
Жыл бұрын
Glad to hear that. Thanks for watching
@anupbhavsar8163
2 жыл бұрын
This was most awaited video! Thanks Reza!
@RezaDorrani
2 жыл бұрын
Hope you enjoyed it!
@anupbhavsar8163
2 жыл бұрын
@@RezaDorrani Yes!
@rrrrrob12
Жыл бұрын
Excellent examples and explanations. I'm an intermediate looking for better ways to do things..... Thank you!
@RezaDorrani
Жыл бұрын
You're very welcome!
@AlexJann23
2 жыл бұрын
Hi Reza, thank you for all your efforts in creating videos. You're the best in terms of the content and making each steps understandable, dare I say better than Jon Levesque and Jon is great!
@RezaDorrani
2 жыл бұрын
Thanks Alex.
@gouravbagora2600
2 жыл бұрын
Like always BRILLANT!! Thanks, Reza
@RezaDorrani
2 жыл бұрын
Thanks Gourav
@Obiwan-ik2tw
Жыл бұрын
Thank you Reza 💙 Reza is the best!!!!! 💙This one is amazing. I am not sure if I can understand fully, but I will do my best. This is amazing.!
@RezaDorrani
Жыл бұрын
You can do it!
@Obiwan-ik2tw
Жыл бұрын
@@RezaDorrani Thank you👍😁
@alexmeza6984
2 жыл бұрын
Muchas gracias por compartir tu conocimiento con todos nosotros 👍👍👍
@RezaDorrani
2 жыл бұрын
Gracias
@surajporwal9405
2 жыл бұрын
Great video, Amazing Power Automate content in a single 35 min video. Request you to make something for Batch add/delete or some other batch process using power automate.
@RezaDorrani
2 жыл бұрын
Thank You. I will add the batch process request to my backlog.
@mikesmith2315
2 жыл бұрын
brilliant clear teaching thankyou
@RezaDorrani
2 жыл бұрын
Thanks Mike
@ramisolipe7001
2 жыл бұрын
Perfect as usual, I hope there will be more videos about Expressions
@RezaDorrani
2 жыл бұрын
Thank You. Every flow video of mine has a heavy usage of expressions.
@kirane7000
2 жыл бұрын
Thank you Reza for this wonderful video.
@RezaDorrani
2 жыл бұрын
You are very welcome
@ion669
Жыл бұрын
Thank you so much for sharing your refined insight is been a lot of help for a beginner like me.
@RezaDorrani
Жыл бұрын
You are so welcome!
@salakosunday
2 жыл бұрын
Wow. so much to learn with Reza. Keep it up.
@RezaDorrani
2 жыл бұрын
Thank You
@RevusDeonauth
3 ай бұрын
Reza your videos are Awesome! All facts! Thank you
@dataisfun4964
2 жыл бұрын
Priceless Reza thanks for this.
@RezaDorrani
2 жыл бұрын
You are most welcome
@ukrsolid
2 жыл бұрын
Nice walkthrough!
@RezaDorrani
2 жыл бұрын
Thank you 👍
@oluwatobiyusuf
2 жыл бұрын
Thanks for another great video and knowledge shared
@RezaDorrani
2 жыл бұрын
My pleasure.
@CovertSecOps
2 жыл бұрын
Very good. Thank you
@RezaDorrani
2 жыл бұрын
Your most welcome!
@matheusosa
2 жыл бұрын
Simply amazing!
@RezaDorrani
2 жыл бұрын
Thank You!
@pritichaurasia8970
Жыл бұрын
Thank you for the video Reza :)
@RezaDorrani
Жыл бұрын
Most welcome
@cptcavernicola
2 жыл бұрын
Reza as always excelente video. Lots good examples, wish you the best.
@RezaDorrani
2 жыл бұрын
Thanks Marcelo
@PowerPlatformDiv
2 жыл бұрын
magical video
@RezaDorrani
2 жыл бұрын
Thank You
@balakrishnapemmasani6490
2 жыл бұрын
Great video thanks Reza for effort and support
@RezaDorrani
2 жыл бұрын
Glad you enjoyed it
@naysk128
2 жыл бұрын
You're the best, Thx!!
@RezaDorrani
2 жыл бұрын
Thank You for your kind words
@professor1429
Жыл бұрын
Thanks!
@RezaDorrani
Жыл бұрын
Thank You!
@hailm03
Жыл бұрын
big thank from VietNam
@RezaDorrani
Жыл бұрын
Most welcome
@franknielsen7713
2 жыл бұрын
Very very nice video Reza 👌👌👌👏👏👏
@RezaDorrani
2 жыл бұрын
Most most most welcome
@spen2431
2 жыл бұрын
Thanks Reza. Mind 💥 again...
@RezaDorrani
2 жыл бұрын
Thank You so much.
@chaddiytuts2496
2 жыл бұрын
great video Reza!!
@RezaDorrani
2 жыл бұрын
Thanks Chad
@turisabela
2 жыл бұрын
Really nice video!!
@RezaDorrani
2 жыл бұрын
Thank you very much!
@daXcel7448
2 жыл бұрын
Amazing Video.. Please see if you could slightly reduce the pace in the upcoming videos
@RezaDorrani
2 жыл бұрын
I have got my pace down from about 2 years ago :) I will work on going one level slower. Thank You for the feedback.
@ajaychoudhary5596
2 жыл бұрын
Awesome Reza 👍👍👍
@RezaDorrani
2 жыл бұрын
Thank you! Cheers!
@HinaGeo
2 жыл бұрын
Thank you Reza for another great video. I really thankful for the guidance on avoiding loop. Regarding parsing Json can you please guide how we can apply query or filter on the parsed json to get only specific data by matching some string?
@RezaDorrani
2 жыл бұрын
I have done several flow videos where I have used the Data Operation action "Filter" .
@nittinsharma9326
Жыл бұрын
Thanks for another great video. Have a question: We are checking if we could store some business rules as expressions in dataverse tables and then invoke them in Power Automate based on needs.
@RezaDorrani
Жыл бұрын
Never tried that scenario. Probably would be possible.
@side54723
2 жыл бұрын
Great as always. Can you make a video on your vidéo recording and editing process :D ? Maybe you use power platform in the process :)?
@RezaDorrani
2 жыл бұрын
Thanks Jeff. I use Camtasia to record and edit my videos. I take on average 4-6 hours per video for recording and editing.
@sundrapillay6668
2 жыл бұрын
Thanks Reza 👌
@RezaDorrani
2 жыл бұрын
You are most welcome
@gayirga3825
2 жыл бұрын
Hi Reza, Your posts and videos are awesome and very helpful. I posted questions on the comments today and last week. For some reason I do not receive comments and my questions ate missed from the posts. Did anyone have idea on those? Thanks!
@RezaDorrani
2 жыл бұрын
Thanks for liking my videos. Which platform are you unable to post comments on? KZitem or the community forums?
@gayirga3825
2 жыл бұрын
@@RezaDorrani I posted a question how to get/retrieve user groups (group names) and Permission level of each group in a site using power automate. I am able get each separately, but unable to map them, that is a user group to it's permission level. Your clues and idea are so helpful. Thanks for reaching out!
@RezaDorrani
2 жыл бұрын
@@gayirga3825 I would recommend to post your issue with screenshots on the forums at powerusers.microsoft.com
@gayirga3825
2 жыл бұрын
@@RezaDorrani Sure will do that.
@gayirga3825
2 жыл бұрын
@@RezaDorrani Thanks!
@laxmikantbhukmaria9215
2 жыл бұрын
Hi Reza!!! Commendable Videos. Kindly suggest for below mentioned issue I have a table with multiple mail IDs. Flow generated same number of mails as per IDs. (If mail id is 4 times, it will send 4 mails with HTML table) Rgds
@RezaDorrani
2 жыл бұрын
I do not have a specific video on that use case. May be this video helps kzitem.info/news/bejne/1aZm0ICkpn2UeKg
@tristangeoffroy9286
2 жыл бұрын
Thank you Reza. That was a real dive in. Would you think of an equivalent GetItems action but against Dataverse table? So with one action, we could filter a table on multiple columns. List Rows( filter rows) seems to accept only one column at a time.
@RezaDorrani
2 жыл бұрын
It does support multiple filters. I will have to look at your flow in action to know more about your issue. I would recommend you post your issue/query with screenshots on the forums at powerusers.microsoft.com
@housefulltoystore496
Ай бұрын
aWESOME. i wanted to change date/time receive from a SP list and extract the date part only and send it in an email. which expression builder will work the best.
@RezaDorrani
Ай бұрын
I would have to try that scenario to know the expression. I will recommend checking or posting your query on forums in case someone has done something similar powerusers.microsoft.com
@KryptonAndBakchodSquad
2 жыл бұрын
Hey Reza thank you for sharing this amazing knowledge I do question please try reply it How can I shows custom fields value which are in dataverse. Basically I am creating custom update from and I need to show user there fields value which they have created while submitting from Canvas How can I achieve this Database : dataverse
@RezaDorrani
2 жыл бұрын
I do not have a video on this use case. I would have to try it out to provide the steps. I will recommend you check on the forums at powerusers.microsoft.com/
@aishwaryaagarwal8988
2 жыл бұрын
Hi Reza, thanks for the video. I have a question. So, I am trying to automate feedback forms where there's a column named 'Additional Comments' and users enter comments with a newline. As soon as a new line is encountered in SQL, it goes to next column and hence not taking the data properly. I was thinking if I could replace the newline character in the flow with a space character. Please let me know how to proceed with this problem. Thanks :)
@RezaDorrani
2 жыл бұрын
I do not have a video reference on this scenario and would have to try it out to provide guidance. I would recommend posting your issue/query with screenshots on the forums at powerusers.microsoft.com
@gandlaveeresh7232
3 ай бұрын
Hi sir hope you are doing good. Can you please give me a way how I can read the CSV format attachment from mail and that attachment data needs to be written into some SP list. Need your guidance can you please help me with this.
@RezaDorrani
3 ай бұрын
I do not have a video reference on this scenario and would have to try it out to provide guidance. I recommend checking on the forums at powerusers.microsoft.com/ in case someone has done something similar.
@gayirga3825
2 жыл бұрын
Hi Reza, as per your advice I posted the issue on the Power Automate Community site. Site groups generated using (_api/Web/SiteGroups) in http request, and Roledefintions generated using (_api/Web/RoleAssignments?$expand=Member,RoleDefinitionBindings) in different http request. Both are within the same flow. I am trying to map Group Name (from _api/Web/SiteGroups) output to Permission Level (in _api/Web/RoleAssignments?$expand=Member,RoleDefinitionBindings) output. Tried Compose, Select, ... in Data Operation including loop, but unable to achieve. Thanks!
@RezaDorrani
2 жыл бұрын
I will have to look at your flow in action to provide guidance. Forums would be your best bet. I myself go to assist in the forums but only in my free time.
@gayirga3825
2 жыл бұрын
@@RezaDorrani That is great! Thanks Reza as always!
@EldoradoSafarov
2 жыл бұрын
Hello Reza! Can you help me? I need to do automatic delete from SharePoin list the rows of records older 1 year. How can i do this? Thank You
@RezaDorrani
2 жыл бұрын
I do not have a video on this scenario & would have to try it out to provide guidance. I would recommend checking on the forums at powerusers.microsoft.com in case someone has done something similar.
@asimplelifeofasimplegirl1253
2 жыл бұрын
Hi Reza ..I have requirement that I need create folder in SharePoint library with name that comes from Excel name column and after that need to update other values of columns also like status ,start date... from Excel only can you please tell me how I can update(which action i can use to update folder columns ) other columns after creating a folder in power automate flow
@RezaDorrani
2 жыл бұрын
I do not have any video on this scenario. To provide guidance, I would have to try out this scenario. I will recommend you check on the forums at powerusers.microsoft.com/
@rohitwattamwar1
2 жыл бұрын
Hi Rezza, Appreciate to this truly awesome content. I was having a question, does power automate expression have left, right, mid etc. string functions. ?
@RezaDorrani
2 жыл бұрын
It does not. You would need to use substring function.
@shaniapereira3973
2 жыл бұрын
hi reza, this is a great video for beginners like me. I needed help sorting an array of integers. Can you please help.
Question regarding Flow run links being sent out. If I receive an email with a flow run link to the exact flow that failed and it is day 29. Will I still be able to access it ?
@RezaDorrani
Ай бұрын
You can now increase duration of flow run history as it can be stored in Dataverse. Check learn.microsoft.com/en-us/power-automate/dataverse/cloud-flow-run-metadata
@sharadpatil1320
Жыл бұрын
Hello Reza, Please let me know how we can close an opportunity as Won/Lost. I tried update a row action in MS dataverse but it is not working. Getting incorect code for status error. Looking forward to your reply. Thanks in advance
@RezaDorrani
Жыл бұрын
How can I know without knowing the table structure, column types etc. etc. + I do not have a video reference on this scenario and would have to try it out to provide guidance. I recommend checking on the forums at powerusers.microsoft.com/ in case someone has done something similar.
@harshjain1207
25 күн бұрын
Is there any simulator tool where we can test out functions?
@RezaDorrani
25 күн бұрын
I’m not aware of any simulator tool
@moyura2
4 ай бұрын
14:13 Would it be possible to convert the date/time to the user's local time zone, meaning the result shows differently based on the user's location? Thanks for sharing.
@RezaDorrani
4 ай бұрын
As long as you have info of users local time zone while running the flow, you can do that.
@moyura2
4 ай бұрын
Thank.
@lionelboon9141
Жыл бұрын
Hey reza this is great. however Im not able to edit the expressions in the dialog box. are u aware of this bug? not sure who can i raise this to. possible to advice? also, isit possible to trigger an approval based on a particular input of a form using an expression? for eg. If form contains a particular response, send approval to A. If form contains a different response, send approval to B.
@RezaDorrani
Жыл бұрын
Not aware of any such bug. I would recommend posting your issue/query with screenshots on the forums at powerusers.microsoft.com
@awadheshdammaniaddy
2 жыл бұрын
Hi Reza, I have a power Automate where I am pinging multiple person in teams one by one using apply to each from my power BI data. Problem is as it is teams i dont know weather it worked or not so I call result('MY_PARENT_ACTION').It give me all the details however It is giving me Result Set: [{"name":"Apply_to_each","inputs":{"foreachItems":[ Which I dont want I want only one value from that result say the person how is clicked. I am not able to figure out kindly help
@RezaDorrani
2 жыл бұрын
I will have to look at your flow in action to provide guidance. I would recommend posting your issue with screenshots on the forums at powerusers.microsoft.com
@urosgabrovec
2 жыл бұрын
Do you know maybe how to replace a select action with an expression (to create array from one JSON property)?
@RezaDorrani
2 жыл бұрын
It depends on the data structure. If I have a string a,b,c,d and using split it will create an array. There are options and it differs based upon the use case.
@neelimakammila7891
2 жыл бұрын
Thank you for the video !! Could you please help to write an expression in power automate. If Column A is less than or equal to Column B then output should be column C else output should be column D. I have developed a workflow and trying to write the expression in "SELECT" tool where the output from If condition should be captured. Please help. Thank you
@RezaDorrani
2 жыл бұрын
If(lessOrEquals(a,b),c,d) It would be ideal to look at screenshots of your flow in action. I would recommend to post your query with screenshots on the forums at powerusers.microsoft.com
@changalrayudu3151
2 жыл бұрын
Hello Sir! Can we able include the google maps in the powerapp.
@RezaDorrani
2 жыл бұрын
Not sure about google maps. Check kzitem.info/news/bejne/w4uFn4WuhJqWaYo & kzitem.info/news/bejne/xKBoyXdufnSbYH4
@premkumarreyya9691
2 жыл бұрын
Hi riza sir, I am using sharepoint list as a data source and I am extracting data with "get items" then next step I used "select data operation" option when I am going to to "crate a html table" with output of "select data operation option" . In html table all column are fine expect multi choice column in that column I am getting a Array data instead of sting. Please help me out this
@RezaDorrani
2 жыл бұрын
You would need to use expressions to convert array of choices to string. join is the name of the function.
@premkumarreyya9691
2 жыл бұрын
@@RezaDorrani in power apps we can use concat formula which we can choose the column data in this case value column. How can i get like that expression in power automate
@RezaDorrani
2 жыл бұрын
@@premkumarreyya9691 There is a select function. It is difficult to provide guidance without looking at your flow. I would recommend to post your query on the forums at powerusers.microsoft.com/
@premkumarreyya9691
2 жыл бұрын
@@RezaDorrani ok sir i will send messages you there thank you
@RezaDorrani
2 жыл бұрын
@@premkumarreyya9691 Don’t send to me. Post it on the forums. Allow everyone to answer. I go to forums only in my free time.
@kavyamuniswamappa
2 жыл бұрын
How to extract the data from Dataverse into xml file.. I have two dataverse tables related and I need to extract the data from both of them into xml.. is that possible?
@RezaDorrani
2 жыл бұрын
Never tried this, hence do not know if it’s possible. I will recommend posting your query on forums at powerusers.microsoft.com
@kavyamuniswamappa
2 жыл бұрын
@@RezaDorrani thanks
@learnithme6703
2 жыл бұрын
Hi Reza Can you help me get ISOWeekNum in MS flows
@RezaDorrani
2 жыл бұрын
I have not tried an expression for this one. I will recommend posting your query on the forums at powerusers.microsoft.com
@HammadJagirdar
Жыл бұрын
This link contains the Reza playlist to power automate expressions. kzitem.info/door/PLN-cZRQeAiDVQ-6ZWGr43yyTcpu6mUgrR
@RezaDorrani
Жыл бұрын
Thanks for sharing
@olegshulga6941
2 жыл бұрын
Hello Reza, I have a question, why in 13:18 your expression "and" that has "startsWith" and "endsWith" expressions inside gave you true? Especially "endsWith" expression with second parameter as 'd'? It should have returned the false as your string 'Reza Doranni' doesn't end with letter 'd'.
@RezaDorrani
2 жыл бұрын
the actual expression was showcased at 12:34 13:18 - shows the static expression text that I mistyped.
@olegshulga6941
2 жыл бұрын
@@RezaDorrani Thanks for your clarification and for your great content👍
Пікірлер: 183