Plastering is all about perfection an been an perfectionist all round I just love standing back an looking at my art
@macplastering
3 жыл бұрын
For sure I am always trying to do a better job every time :)
@clifbrewster8822
Жыл бұрын
I'm with you on not working your ass off bringing it back alive
@macplastering
Жыл бұрын
For sure the job can be hard enough :)
@craigvarey9230
3 жыл бұрын
Awesome Maccy boy! I've learned so much from your channel! A massive thumost up from me!
@macplastering
3 жыл бұрын
Cheers mate means a million :) hope your getting on well :)
@dismaldog
4 жыл бұрын
Good to see ya reviewing it again-not something i would use really but as ya know i only do small bits and pieces at moment so i won't totally dismiss it 100%-still prefer my hand tools.Stay Safe Buddy
@macplastering
4 жыл бұрын
I can see this being great on bigger walls I think then we would see the real befits also cant wait to use it in around scaffolding hoping this is an upcoming job with it in use again :) the cordless will be kinder than wires going everywhere :)
@wayneturley7814
4 жыл бұрын
Great tool for rubbing up machine applied bag render, good seeing a lad show the hole job not just the nice shots, not one of us perfect, tricky when the sun beats on half your wall let alone over years old brick and old concrete cappings, everything sucking the life out of the render , turned out well man 👍🏻
@macplastering
4 жыл бұрын
Hi Wayne mate hope your well, than you mate yes we are al human for sure and plastering is not an easy job by any means so I think it best to show some of the struggles we face haha glad you liked the video and thanks for the comment mate :)
@AnnieThyme
4 жыл бұрын
Considering you said you were still getting used to it the finish looks incredibly well (even without knowing you were getting used to it- it looks great!). It looks like it could be somewhat unweildly but no doubt, on large projects it could be a real godsend Hope you and the family are all well and having a good week so far! :D
@macplastering
4 жыл бұрын
Hi Annie Oh yes we are getting on well here hope you are too :) this tool is getting better and better the more i use it lie everything when you get the hang of it you'll be flying cant wait to show more videos of it in use :) Thanks for watching and supporting Annie :)
@squidlings
4 жыл бұрын
Loving your videos. Your tips helped me render my house! Wish I'd known about this tool though
@macplastering
4 жыл бұрын
So glad to have helps you out some buddy :):) im still getting the grips of this but every time i use it i get better and better might try get a smother sponge for it :)
@dilligaf2386
4 жыл бұрын
Good video think I'll stick with a hand float. Probably needs some getting used to. Like you say don't use it if it's to wet properly send it all over the place , 1 hour to float it and 16 hours to clean it off the car and house, lol🤣
@macplastering
4 жыл бұрын
Haha would be a mess if it did that spraying it everywhere LOL but no mate it wont go that quick my 1st go was on wet walls I should let them go but the cold was holding them back way to much but when the sun is on it it was lovely working it in with the powerfloat :)
@emmettmccarthy7247
3 жыл бұрын
I would like to give it a go with the power float just to try new ways.im so used to the orthodox float and sponge method that it would really want to be good if I was to buy it.then it might be easier to use if u had less experience
@macplastering
3 жыл бұрын
For sure worth a try if you ever can mate next floor job i remember im testing it on lol
@rockroll456
4 жыл бұрын
Cool bud👍🔥
@macplastering
4 жыл бұрын
Cheers man for sure will be seeing more of this tool
@kaimichael5444
3 жыл бұрын
Is that the ramboo sponge magic sponge. I've just bought one heard good thing about magic sponge. Am I right in saying it's just last rub over after powersponge
@macplastering
3 жыл бұрын
You could finish it with the songe float but I think it looks a little cleaner with a tidy up by hand and takes no time really, the sponge float I am using here is refina click clack very good - amzn.to/3agqtF7 with a fine sponge attached the rambootools one is good also have used it on other and older videos have a good few refina floats still to get tested :)
@mickdowney3363
4 жыл бұрын
Did you find it any quicker, or dose it vibrate to much when holding, thanks
@macplastering
4 жыл бұрын
It did vibrate once or twice but I think that was more me getting used to it as for by the end of the video I felt much better with it and very confident with the sponge , I think it was faster as it was very dry and drying fast so hand tools might have struggled so would have to say this was a faster way of going for this weather and type of all
@markhep
4 жыл бұрын
Looks like it's a good tool but needs practice to use. 👍👍👍
@macplastering
4 жыл бұрын
For sure mate I would say after 3 or 4 times a guy would be 100% with this tool and cant wait to show it off more in future videos :)
@markhep
4 жыл бұрын
@@macplastering nice Yere definitely will save the arms👍👍👍
@macplastering
4 жыл бұрын
@@markhep for sure especially if gear is setting fast
@anthonykenny1120
4 жыл бұрын
Hi Mac,, great piece of equipment for you as you carry out big jobs, do you just clean sponge with water after use ? Great job on the wall, lovely finish 👍👍
@macplastering
4 жыл бұрын
Yea the sponge seems to clean easy a lot easier than i 1st thought it would , I also when storing try to keep it on top of anything as dont want it going out of shape , the sponge attachment is much easier to get on and of the plastic blade / float attachment is a little difficult to remove also its easy enough to clean , I finish the wall at the end of the video just a light rub down with a sponge float
@alancarroll5832
4 жыл бұрын
@@macplastering what is the battery run time + charge time !!!!
@macplastering
4 жыл бұрын
@@alancarroll5832 Hi Alan mate I am lucky as have the collomix drill that also has 2 bats so I have 4 bats for it as they all fit each other but the one battery did these 3 walls the 4th that was patched in was just hand tools as didn't want to destroy the sponge on the joint if that makes sense and they charge quick has battery indicator red to green
@stevecsincsa6537
3 жыл бұрын
Hey this is a great video, where could a Canadian get one of these?
@macplastering
3 жыл бұрын
Hi mate thanks glad you lied the video have more on this tool coming up this machine is from Refina if you type that into the web it should bring you to their site
@peteskyrunner4845
3 жыл бұрын
Why do you keep stopping every few seconds? Is it to rest your arms because it is heavy? I saw your previous video where you got on it too wet. Looks like it's working a lot better here when the render is more dry. I'm thinking of getting one. Where did you buy it from?
@macplastering
3 жыл бұрын
This one is from refina mate , I think I was hitting it the odd time off be mistake still getting used to it also to have a look make sure it is coming in well witch it was also I think i was jumping up and down of crate so some safety so it wont catch anything while spinning Hope this make sense :) Thanks for watching buddy have more of these to come for sure :)
@macplastering
3 жыл бұрын
Oh yes it was way way better this time, the more i use it the better i get with it to be honest
@peteskyrunner4845
3 жыл бұрын
@@macplastering Yeah any new tool or technique requires practice. You did well considering it is a new toy :-)
@macplastering
3 жыл бұрын
@@peteskyrunner4845 Thank you mate yes i done it no justice 1st time around but now I feel more confident as you know hard to take a risk when that risk could cost you a whole mornings work but I was well pleased with result
@uvelwray961
2 жыл бұрын
What is the name of that brand your using
@macplastering
2 жыл бұрын
Hi uvel its got refina on it and ebinstock
@alanadoran2624
2 жыл бұрын
Good job but the walls I’m doing are 10-15 times bigger than that. Would u recommend it for walls that size, thank u.
@macplastering
2 жыл бұрын
Hi Alana it would work ok for sure especially if 2 batts I have a video where I have done like 4 or 5 walls on the 2 batteries all a similar size to this one and you can get ones with leads /wires
@dioriginalrikog
Жыл бұрын
Where can I get this to buy?
@macplastering
Жыл бұрын
Refina mate
@nom843
2 жыл бұрын
what make is the hand float you use and is it a medium or fine sponge...and would you recommend the power float? Thanks
@macplastering
2 жыл бұрын
Refins was it the grey one?
@macplastering
2 жыл бұрын
Yes power float is still useful even used it in s recent video mate
@nom843
2 жыл бұрын
@@macplastering yes grey 1
@macplastering
2 жыл бұрын
@@nom843 yes refina diamond float them ones mate a few different sizes they have
@garyd4740
4 жыл бұрын
Quality, much vibration to overcome?
@macplastering
4 жыл бұрын
I find only when there has been a taste that has a bump but lie this wall when right a straight it seems to work really well and dont well it vibrating to much in the arms
@NorthdownAngler
4 жыл бұрын
Any chance of you running training courses for the (people too old for aprenterships) if you ever consider it gimme a shout 😁
@macplastering
4 жыл бұрын
I would love to do something like that mate
@michaelmoroney4594
2 жыл бұрын
How much does it cost
@macplastering
2 жыл бұрын
They on refinas wen site mate think like 800 might be more or less but around that
@michaelmoroney4594
2 жыл бұрын
@@macplastering cheers
@macplastering
2 жыл бұрын
Anytime mate
@ruelreid6048
3 жыл бұрын
what the work time of battery
@macplastering
3 жыл бұрын
Im not sure mate but with the batteries i have never wasted one with out the other been abke to be fully charged
@simonspencer1485
2 жыл бұрын
What was the render mix that you use ?
@macplastering
2 жыл бұрын
Most likely 4 to 1 mate have a few videos showing the mix and how to render in loads of detail
@bloggs692413
3 жыл бұрын
Nice un flat no ripples in that
@macplastering
3 жыл бұрын
hi buddy hope your doing well , yes this came in pretty good much better than in the wetter colder weather i fist tested it have some more footage i need to whip into shape and upload :)
@nikolaskerr6578
2 жыл бұрын
Not selling it to me 🤷
@macplastering
2 жыл бұрын
Im not trying to just showing it in use and to be fair i showed my 1st time with it witch wasn't good again some love them some dont all im doing is showing it in use
Пікірлер: 69