Thanks for keeping it simple and affordable. That’s a part of why we reload in the first place !
@SDMacMan
Жыл бұрын
Good idea. Two things I would change. I would have less angle on the blade and I would cut the blade off with a cut off wheel so that it barely sticks out like a 1/16-in. Less chance of ending up in the emergency room. Haha
@maxxbear5014
Жыл бұрын
I still use that same one never had to change the blade and it still sticking out that far. lol
@CarlPapa88
3 ай бұрын
I like the DIY vice & trimmer. Just need to pick up a drill press.
@GalloPazzesco
3 жыл бұрын
LOL ... love your style Brother. You should've been born a Southerner. Upvoted and subscribed and notifications are turned-on.
@maxxbear5014
3 жыл бұрын
Thanks I hope it helps with your shotgun reloading
@1791Actual
4 ай бұрын
Love it... absolutely great idea.
@maxxbear5014
4 ай бұрын
Thanks
@jungleno.
2 жыл бұрын
Good job Max. I made a jig to shorten them using my scroll saw.
@maxxbear5014
2 жыл бұрын
I can see how that would work that’s a good idea
@Freefallpilot65
9 ай бұрын
Thanks for keeping it simple while also motorized. I almost bought one of those $85 trimmers. Now I can put that $ towards a roll crimper unless you have a DIY video on that too. lol
@maxxbear5014
9 ай бұрын
No I don’t have a roll crimper. Lol but I do like the royal crimper’s from precision the best.
@jamespollard1670
4 жыл бұрын
That is a nice trimmer , I have the shell holders like yours too .
@maxxbear5014
4 жыл бұрын
The shell holders do work good. Best thing there easy to make
@xmetguy1
3 жыл бұрын
Simply Fantastic! You sir are a thinker. Thank You!
@maxxbear5014
3 жыл бұрын
Thanks
@makerofmanythings8447
3 жыл бұрын
Decent job, I'll give it a try. Thanks for the video.
@anatineduo4289
9 ай бұрын
brilliant
@ekim000
4 жыл бұрын
Smart idea! Thanks for sharing. My ghetto cobbled POS gets ditched tomorrow.
@ferraritoybox
Жыл бұрын
Thx, good thinking outside of the box
@maxxbear5014
Жыл бұрын
Thank you
@beeman9500
3 жыл бұрын
Thanks for sharing 👍 Definitely making a similar set up
@southernshop8424
4 жыл бұрын
Thank you sir
@maxxbear5014
4 жыл бұрын
Your welcome. Hope it helps with your reloading.
@raymondrobbins698
2 жыл бұрын
Excellent idea!
@maxxbear5014
2 жыл бұрын
Thanks. It works really well
@terrysanders2817
Жыл бұрын
Brilliant!
@maxxbear5014
Жыл бұрын
Thanks. Hope it helped with your reloading.
@SteelDinger
9 ай бұрын
Shell holder looks like a giant clothespin
@maxxbear5014
7 ай бұрын
sorry for the late reply, but I just got off probation with KZitem and now I can see all my comments. yes they do look like big clothes pins.lol
@jforo3281948
3 жыл бұрын
How do you "pound" the blade into the broom stick?...great idea, thanks for sharing.
@maxxbear5014
3 жыл бұрын
Hi John, It’s a utility knife blade I break off the tip with a pair of pliers then I hold it with a pair of pointy nose pliers and tapping in with a hammer about a 1/4” deep.
@jforo3281948
3 жыл бұрын
I think I got it? So you pond the small broken piece? Thanks for your response. BTW brilliant idea and I'll have to make the hand vise as well.👍
@carfvallrightsreservedwith6649
Жыл бұрын
Yep. He drives the tip of broken piece into wood using the snapped off edge as the striking surface. The guard not only prevents you from shredding your digits but should also deflect that slicer from flinging in God knows which direction. Nice device. Holders too.
@takiyosi
2 жыл бұрын
Great fixture. Can you tell me how to attach the blade to the wooden treamer? Also, the blade seems to be different from a cutter blade, what kind of blade do you use?
@maxxbear5014
2 жыл бұрын
All I did was grab the end of a utility knife blade with a pair of pliers and snap the tip off then I lined it up and tapped it in with a little hammer into the wood
@Gunners_Mate_Guns
Жыл бұрын
I'm sure that I'm missing something here, but how do you crimp your shells once you've chopped off that much of the hull?
@maxxbear5014
Жыл бұрын
I roll crib with an over shot card or if I’m fold crimping I have a cut down lee load all I have a video on it just search my channel you should be able to find it thanks for watching the video
@Gunners_Mate_Guns
Жыл бұрын
Okay, that makes sense now. I assume this would also make loading slugs a bit easier, given that those are usually roll crimped.
@johnwalters7415
4 жыл бұрын
Can you show how you made the trimmer
@sluggou812beotch
3 жыл бұрын
Ya I'll build one o them.
@1stFlyingeagle
3 жыл бұрын
When shortening the hull. Does that screw with the center of the crimp? I am new to reloading hulls.
@maxxbear5014
3 жыл бұрын
If you are loading for shotshell... then no I mainly trim so I can roll crimp for slugs I use hard wads and nitro cards.
@happycamper2976
3 жыл бұрын
I reloaded thousands of shotgun shells and i never had to trim the hulls
@maxxbear5014
3 жыл бұрын
It’s for when you roll crimp.
@wayneblisner4685
2 жыл бұрын
never leave the chuck key in a drill press
@maxxbear5014
2 жыл бұрын
Yes that is a bad habit I used to have but not no more thank you
@miketreen7403
4 жыл бұрын
You could sell those.
@maxxbear5014
4 жыл бұрын
Noooo. Mike. Thats why i posted it so anyone can make one
Пікірлер: 50