This is great information. I've been doing this with etap as an intern, but this explained the back end of why we care.
@ashk2318
Жыл бұрын
As an intern at ETAP, what do you do specifically regarding load flow? Also is the work difficulty? Thank you.
@Ms95656
5 жыл бұрын
Wow that was great explanation. I really appreciate this clear and easy way to understand in simple way how to analyze the system.
@EthanMatthes
6 жыл бұрын
Dear C# Tutorials: I'm enjoying your instruction. The graphics and narration are very clear and accessible. In this particular video, there is a digression about which generation units are committed to run and serve load. Please consider revising that section. There are a lot of factors at play: Is it a region where wholesale electricity is traded in a market or is it for a traditional vertically integrated utility that owns and operates everything? You also need to distinguish between energy consumed by load and energy capacity needed to fulfill reliability requirements. Nuclear power definitely is not the least cost source in an era of cheap natural gas and plentiful solar and wind (no fuel costs). The renewable sources also receive incentives for added advantage. Natural gas is flexible to balance out variable renewable supply, but in some regions it must participate in cap and trade. There are also limits on the has pipeline system during winter months. Security, environmental, and legal costs are significant for Nuclear. Until modular nuclear is commercialized (NuScale), nuclear will be considered an inflexible base load source. Aside from the digression into generation sources, I'm loving your instruction. Keep up the great work!
@aqeelalmousawi1500
5 жыл бұрын
I thought apparent power is P+jQ but you have it as P-jQ Good explanation thank you
@abhishekparamanand
7 жыл бұрын
It was a very good introductory video on LFA. Thank you. Looking forward to more such videos.
@mokhtarawwad6291
3 жыл бұрын
THANKS for the strait forward we explained explanation
@Kaiser.Alexander.I
7 ай бұрын
Awesome explanation! 👏🏼
@yihadhaddad9621
6 жыл бұрын
Magnificent explanation. Thanks a lot.
@Omarsayan
7 жыл бұрын
Good explanation, but you need to clear 2 things: 1) The direction of current I(load) and 2) put a star near V2 in the formula, e.g (P-jQ)/conjugate(V2)
@JohnHondo11997
6 жыл бұрын
I concur with this.
@ryszardcetnarski6648
4 жыл бұрын
Congrats for the quality of schooling
@jasond2454
7 ай бұрын
Thank you! This really helps with my course project.
@maracay20001
7 жыл бұрын
excellent explanation
@michaelbee8263
5 ай бұрын
Great job
@user-kn6xf8un7l
5 жыл бұрын
very good explained,thank you so much
@rainereyes9027
Жыл бұрын
Hi.. I just have a question with the 1st equation Iload+ I1 +I4=0.. did you just transposed I1+I4 on the other side? im just wondering why they did not have a negative sign.. and it should be like Iload= - (I1+I4)? thanks
@auguybakome1127
4 жыл бұрын
Thanks for the detailed explanation. Very helpful
@sajjadkareem608
2 жыл бұрын
Thanks for the great lesson
@TheHaidaman1
7 жыл бұрын
brilliant explained and simple to visualize.
@richardf9112
3 жыл бұрын
Incredible video. Thanks so much!
@sohailjanjua123
3 жыл бұрын
Hi , I like your lecture. Thanks
@CH-tv1cy
6 жыл бұрын
Best explanation I've seen
@ebarbie5016
4 жыл бұрын
The P-jQ is actually a power conjugate, not just power
@vrbaac1641
3 жыл бұрын
hi.... great subject... ^^ I also want to know, is how can this principle be applied internally to a power system of lets say a a High Rise Building...? thank you very much and hoping for more lessons to come ^^
@clemzo6
2 жыл бұрын
It was clear, thank you. I just have one question : When you go through the iteration, how can you be sure that it is not a local maximum ?
@butterflyseraphine7487
4 ай бұрын
can i run load flow analysis from a real feeder network
@shara6281
3 жыл бұрын
Great explanation 👌🏻
@blackburnmichelson6189
3 жыл бұрын
this is good but how much time we must guess and itharete this bus voltages ?
@eepower
4 жыл бұрын
Great work. Thank you
@ThePeacefullOasis
7 жыл бұрын
Nicely explained. Couldn't be easier :)
@erickarwa-0705
2 жыл бұрын
Wonderful video. Great and simple explanation of LFA.
@bluebird9262
6 жыл бұрын
very interesting explanation. I suppose, this is the Gaus-Siedel method.
@aramidekay5448
5 жыл бұрын
Why I1 and I4 became positive?
@harithalau1970
4 жыл бұрын
thank you for pointing that out, i guess he mislooked
@wilmeresuarez
5 жыл бұрын
Excellent....
@Lonkotuma
7 жыл бұрын
Awesome. clean understanding
@shakirahnaruyinda3324
Жыл бұрын
Wana watch the next video
@bayaacyril8915
Жыл бұрын
Great
@sarangapinipa720
4 жыл бұрын
wow damn!the best explanation.thank you!
@luisfreire5724
Жыл бұрын
que manera de explicarlo!!
@kingworld2002
6 жыл бұрын
At 24:30 i think the sign convention is not correction.plz correct me if I'm wrong
@a13690508319
2 жыл бұрын
you r right
@suratkhan2208
6 жыл бұрын
Excellent
@adembugra
3 жыл бұрын
Hello teacher, I have a question about the power systems analysis course, can you help me?
@snehamoypatra9786
5 жыл бұрын
MARVELOUS
@robertdavies3384
4 жыл бұрын
What I don't understand is - why does power flow from the generator bus to the load buses with lower voltage? I.e. How can power flow if there is higher potential difference at V1=1.0 to V5=1.03?
@scc1314
3 жыл бұрын
Hi! For active power flow, it is usually dictated by the angle difference. The bus who leads will deliver the active power. For reactive power, it is usually (for transmission systems with high x/r ratio) dictated by the magnitude. usually the bus with higher voltage will provide the reactive power.
@dhafer72
10 ай бұрын
Hello, do you have e free link to download powerfactory please, I need it for student project ? Thank you
@donty1994
6 жыл бұрын
thank you so much
@suongsocheat7553
7 жыл бұрын
Dear Sir. I'm wanna ask u one Q: Could u tell me about the Voltage Regulator definition and useful on the Video? Thank you.
@theultradiamondgamer7650
4 жыл бұрын
A device which is used to maintain the system voltage with in limits. e.g capacitors are used to maintain the voltage by injecting the vars in system and tap changing T/F are also used to maintain the system voltage.
@wesleycostaee
7 жыл бұрын
Fantastic!
@danilodulovic2197
3 жыл бұрын
at 23:12 I think the last equation is not right, check pluses and minuses
@varghese71
2 жыл бұрын
i agree. plus and minus should be verified for the equations
@thaaralasaday3853
6 жыл бұрын
Is there any vedio about Newton Rufson mothed
@mbagassyaatnuartoro9092
4 жыл бұрын
thanks
@6996skull
4 жыл бұрын
Hi, has anyone been able to get a copy of the matlab script? Would be really helpful to further understand :)
@afaanali4337
6 жыл бұрын
where is the next lecture
@brucelarge2801
3 жыл бұрын
It's in this series, it looks like Ep #2 models it with C# - kzitem.info/door/PLGtyXSn57qnLY9uE-7YhiRIY1_aI3e7tl
@sakirdag2976
4 жыл бұрын
good
@azzammeeralam7182
6 жыл бұрын
For those looking for part 2 here it is. Part 2: kzitem.info/news/bejne/mHehx6yAbl93hI4
Пікірлер: 70