Hola!¿me podrías decir cual es el par de apriete del tornillo de la biela izquierda ? No estoy seguro de cual es , gracias espero su respuesta
@tom10crafted
3 ай бұрын
Hey, I just tighten it until its snug, as I don't have high torque Nm wrench !
@manueljesus9942
3 ай бұрын
@@tom10crafted ok, thank you😉
@VahurKuld-rl1ef
10 ай бұрын
If you are using a 32T oval chainring the narrowest point of it should be 30T, correct? Does the Scott Spark RC Pro have enough clearance between the chain and the chainstay?
@tom10crafted
10 ай бұрын
Technically, its probably more like 31-33T I guess, rather than 4teeths difference (like, 30-34). However, 30T should fit. I know a guy who runs it, round, though - but his frame is S sized I believe. Nonetheless, I guess it should be fine :)
@VahurKuld-rl1ef
10 ай бұрын
@@tom10crafted Thanks, I'll give it a try. What size is the oval chainring you use?
@tom10crafted
10 ай бұрын
@@VahurKuld-rl1ef during the season I interchange them based on the races, 32-34-36, all ovals !
@VahurKuld-rl1ef
10 ай бұрын
@@tom10crafted The clearance with a 32T Absolute Black oval chainring is fine, thanks for the advice!
@tom10crafted
10 ай бұрын
@@VahurKuld-rl1ef glad it helped! Wonder whether 30T oval is doable:)
@flowbike4487
10 ай бұрын
This spacer is only for presfit bb?
@tom10crafted
10 ай бұрын
If you are referring to plastic 2.5mm spacer, I think its not necessarily pressfit, but depends on BB & chainline - there can be frames where it might be not needed
@flowbike4487
10 ай бұрын
@@tom10crafted I have the opportunity to buy a cheap xtr m9100-1 crank, but it is dismantled and does not include this distance. My frame uses a bsa screw-in bottom bracket wide 73mm
@tom10crafted
10 ай бұрын
@@flowbike4487 i would suggest to check the width of your bb - if its BSA threaded it might be too narrow to fit these cranks
@flowbike4487
10 ай бұрын
@@tom10crafted I have frame specialized chisel ltd fire. I have seen bike built on this frame with xtr 9100 crank, it should fit. But no one put the spscer in there like you did
@tom10crafted
10 ай бұрын
@@flowbike4487 with the spacers, you have to be aware for distance off chainstays. Without it, on Spark it would be rubbing chainstay straight 🤘🏼 For example, on XT 1by cranks, each side has those
Пікірлер: 27