Good move, the dust from the factory pads are unbelievable, I replaced them with power stop Z26-1405 best thing I ever did, hardly any dust
@TboneSRT
2 жыл бұрын
Great to hear! I was going to go woth the Z26 but wasn't sure on the brake dust. Now I know, we'll go with those next time
@danielfletcher1384
Ай бұрын
Great video and must do IMO. I did this to my previous Challenger Scat Pack and will am waiting on the parts to do it to my 23 Charger Scat Pack! Thanks for taking us along!
@TboneSRT
Ай бұрын
It absolutely is! Thanks for watching and have fun with the 23!
@realDDemon
5 ай бұрын
My guy, thank you for this! Been searching for pads and rotors for over a week and no luck for my 21’ scatpack WB .. dealer was charging me $4,500 for OEM replacement which is crazy .. I even thought about switching down to 4 pistons in the front just to bring the cost down but then I would need to get new calipers new knuckle spindles etc.. puzzle This is what I’ve been looking for! Thank you
@dreenygonz2055
5 ай бұрын
Did you find brake pads and rotors for your 21 scat pack? I've been looking for both front and rear. Can you help me out?
@TboneSRT
5 ай бұрын
Heck yeah I hope this helps!!
@TboneSRT
5 ай бұрын
@dreenygonz2055 hit up 797performance, they'll be able to help you source rotors!
@realDDemon
4 ай бұрын
@dreenygonz2055 hey man, tomorrow I have a tech that’s going to try and put the rotors and pads in for me, will let you know how it goes, hoping they fit, they should..
@realDDemon
4 ай бұрын
Put them on they fit, rotors are a little small as per the tech but brakes are working fine
@ParakeetPotato
7 ай бұрын
Tip: When working on the front brakes you can turn the steering wheel far left and right to make it easier to work on the brakes.
@TboneSRT
7 ай бұрын
Absolutely!
@jonsandstrom2356
10 ай бұрын
First thing I did to my scat. Virtually no break dust and no problems with the pads. It’s a no brainer.
@TboneSRT
10 ай бұрын
Definitely! They work so well
@ryanhansen7
Жыл бұрын
Great video. For real I was distracted the whole time because you are an Evan Peters doppelgänger.
@TboneSRT
Жыл бұрын
Hahaha!
@Chosen_one333
9 ай бұрын
Great video. Keep up the good content.
@TboneSRT
9 ай бұрын
Thank you! I appreciate that!
@HellCharger
2 жыл бұрын
Good work 👍 . Thanks Sir 🇺🇸👍
@TboneSRT
2 жыл бұрын
Thank you!
@menswearhous
2 жыл бұрын
Any reason you didn't go with the z26's? and can you post a link to those ZL1 jack pads....I tried them on my 22 Charger WB and they didn't fit. Kept hitting the rocker panel flair where it says >jack here
@TboneSRT
2 жыл бұрын
Description is updated now and the link is there! But for that issue, What you do is move the pad a little bit behind where the arrow or cut out in the rocker panel is! The video I have on it, I explain what I did in that situation. And I went with the Z23 because I wasn't sure if the Z26 threw more or less dust than the Z23. Plus we don't really push the car all that hard so they shiukd be more that sufficient. They performed really well during the burnishing process!
@ryanmcmullen3378
10 ай бұрын
What about a higher mileage widebody and having to push the caliper back in for new pads?
@TboneSRT
10 ай бұрын
Normally you can push them in by hand! They push in fairly easy. I'd put an old pad in, and push on it to keep the pistons moving in all at the same time
@hebee81
6 ай бұрын
Great video, I was told that 2021 and up have a 400mm front rotor and the 2020’s land lower have a 390mm. Do those pads have any issues? I was also told that from power stop they don’t have any pads or rotors for the 21 and up. Any wisdom?
@TboneSRT
6 ай бұрын
This is the first im hearing of it! As far as I know you shouldn't have an issue! No issue running them here!
@hebee81
6 ай бұрын
Have you done the rear yet?@@TboneSRT
@TboneSRT
6 ай бұрын
@@hebee81 I haven't, just the front. The rears don't get as dusty
@hebee81
21 күн бұрын
Update, the pads don’t fit my calipers properly and make a crap ton of noise. Called Power Stop and they said it should be fine. Really annoying.
@Juan-pt1lq
Ай бұрын
Have ypu notice any clicking on your brakes like they shift? Mine make a popping noise when i go reverse or foward.
@TboneSRT
Ай бұрын
@Juan-pt1lq it does click in reverse, it did it before the pads and it still does it lol!
@Juan-pt1lq
Ай бұрын
@TboneSRT that click is because you have to clean where the wheel meets the rotor that will stop the squaking popping noise. But the click mine started making after the breaks is different, almost like the break pads are shifting, once I go forward it will make one time. And if I go reverse it will make it one time and so for.
@gillsimpson1306
4 ай бұрын
How many I comes in a box for the pads off the link you’ve got pinned on this video? I’m trying to switch out all my pads on all four wheels
@TboneSRT
4 ай бұрын
In the link those are just for the right and left front
@gillsimpson1306
4 ай бұрын
So can you send the rear right and left ones please
@@TboneSRT man you’re a good man and God bless your good deeds 🙏🏾
@marcogrca
11 ай бұрын
Any recommendations on a front rotor replacements for a 21 charger hellcat. Can’t seem to find any other than OEM
@TboneSRT
11 ай бұрын
If you want to stay with a 2 piece rotor, you'd have to stick with oem from my findings. You can go aftermarket but they won't be 2 piece
@Jonsey-fw1vk
6 ай бұрын
I found these for the 21 and up front rotor replacements, will have to install the hat on them yourself though
@user-pr5po9iq7t
5 ай бұрын
... Would this be IDENTICAL for a 23 Challenger Widebody? 🤷♂️ THANKS!
@TboneSRT
5 ай бұрын
Yes it would be!!
@user-pr5po9iq7t
5 ай бұрын
@@TboneSRT .... Ok, thanks so much! It's been put away over the winter but, the 1/4 mile track is opening up on the 30th so, gonna change them👍! Thanks again and just subscribed! 😎
@TboneSRT
5 ай бұрын
@user-pr5po9iq7t heck yeah! These will be a massive improvement! Have fun and thank you!! 😬😬
@user-qc3mg3pp2s
Жыл бұрын
Did those pads warp your rotors? A lot of complaints in our area about it, swapping brake dust for a pulsing brake pedal.
@TboneSRT
Жыл бұрын
Hmm, no they haven't. So far so good, roughly 1500 miles
@dreday2079
2 ай бұрын
Where can I get the rotors and breaks from?!?
@TboneSRT
2 ай бұрын
Hit up 797performance on Facebook!
@omarsaad4158
Жыл бұрын
Hey bro I ordered them for my 21 wide body scat and when I placed the order it went through on my card but said my information was incorrect on the website and I didn’t get a confirmation email did that happen to you?
@TboneSRT
Жыл бұрын
That's weird, did you buy them from K&N speed factory? If so, the owner Nick Merrone is on Facebook and super active. Shoot him a message and he will help you out 10000%.
@omarsaad4158
Жыл бұрын
@@TboneSRT yeah I ordered from them but everything checked out ok and the money came back ordered them off Amazon for 50 dollars cheaper
@TboneSRT
Жыл бұрын
@@omarsaad4158 oh okay. Good deal man!
@392.Nesbitt
3 ай бұрын
This is a dumb question to ask I have the 6 piston on the front and 4 on rear are the break pads different?
@TboneSRT
3 ай бұрын
Yes they are
@hectortorres9998
5 ай бұрын
Did you do the break in process???
@TboneSRT
5 ай бұрын
I did
@hectortorres9998
5 ай бұрын
@@TboneSRT also you didn’t have to bleed right?
@TboneSRT
5 ай бұрын
@@hectortorres9998 no bleeding required!
@Kmarolord_wbk
Жыл бұрын
Are those brake calipers bigger than the ones from a Camaro ZL1 5th Gen? And would they fit on a Camaro 5th gen also?
@TboneSRT
Жыл бұрын
I honestly do not know. I'd assume the ZL1 has 6 piston calipers In the front though. I'm pretty sure they have brembos. Whether these will fit or not, I have no idea!
@Kmarolord_wbk
Жыл бұрын
@@TboneSRT thanks
@nicoh3277
Жыл бұрын
Any further thoughts so far? Do the 23Z´s eat the rotors more?
@TboneSRT
Жыл бұрын
Only have about 1000 miles so far on them but everything seems to be just fine
@ash_5644
Жыл бұрын
The stock brembo pads put more stress on your rotors bc they are semi metallic. The power stops will be much less harsh on the rotors with a proper bedding
@jaybeano
4 ай бұрын
I got a 2023 widebody scatpack can i put 4 piston brakes on the front?
@jaybeano
4 ай бұрын
im tryna find front brakes but every only coming up as 4 piston
@TboneSRT
4 ай бұрын
No sir, need 6 piston parts. Hit up 797performance they will get the brakes you need!
@jaybeano
4 ай бұрын
@@TboneSRT okay thanks
@yedi015
4 ай бұрын
Do you not have to compress the pistons back in first??
@TboneSRT
4 ай бұрын
Depends on how old your pads are. These pads only had about 1000 miles on them so they weren't really worn so they new pads slipped in. But you may need to. Can do it by hand usually with the old pad and a screwdriver pushed against the piston
@Fuddylarper
2 жыл бұрын
keep us updated...so sick of dust. Whats that external resi on the bilsteins? are they all like that?
@TboneSRT
2 жыл бұрын
Will do! And that's for the adaptive suspension. Only the hellcats and scats with the dynamics package have them. The regular ones just have a single bilstein without the resi
@Fuddylarper
2 жыл бұрын
@@TboneSRT They must have added that later years my dynamics package only came with the 6 pistons and 20's
@TboneSRT
2 жыл бұрын
@@Fuddylarper I believe on the scats, they added this in 18? It was whatever year the SRT 392 was done for
@Fuddylarper
2 жыл бұрын
@@TboneSRT mine is 17' Daytona 392
@TboneSRT
2 жыл бұрын
@@Fuddylarper okay then yep 18 was the year that got the track suspension
@libanvalladares8028
10 ай бұрын
For some reason when I try to buy those, it says that those brake pads and rotors do not fit my charger widebody scat pack
@TboneSRT
10 ай бұрын
Are you using the link in the description?
@libanvalladares8028
10 ай бұрын
@@TboneSRT no I was just looking around online and it would say z23 or z26 was not compatible for my car I have the six piston brakes
@TboneSRT
10 ай бұрын
@libanvalladares8028 ahh okay, yeah if they match the ones in the link in the description, they will for sure work!
@libanvalladares8028
10 ай бұрын
The link isn’t working
@TboneSRT
10 ай бұрын
@libanvalladares8028 yeah he changed the name of his business. Here's the new link 797performance.com/products/power-stop-16-20-charger-challenger-6-piston-front-z23-evolution-sport-brake-pads-w-hardware
@MD-ss5pc
5 ай бұрын
Switched to these nib get squeaking in the morning n random driving. I have new rotors btw
@TboneSRT
5 ай бұрын
Dang that's weird, going on 2 years now and no noises. Did you do the break in procedure??
@brian4jc777
Жыл бұрын
Great video....subscribing!
@TboneSRT
Жыл бұрын
Thank you!! 😎
@katzmanbarrett
2 жыл бұрын
How much brake dust did you save?
@TboneSRT
2 жыл бұрын
Tons! Drove the car 100 miles and I wiped the wheel with my finger and there was nothing on my finger! This is a must do imo! And the car stops just as good as it did with the stock pads
@johnh.9127
Жыл бұрын
Front and rear correct ?
@TboneSRT
Жыл бұрын
The kit only comes with the fronts. I didn't do the rears since the front does most of the braking. They really don't throw much dust so I left them alone. You could certainly do them though! The process is the same
@johnh.9127
Жыл бұрын
@@TboneSRT ok thanks, I’m surprised, I just cleaned the rims and they we’re almost as bad as the front. I do have the challenger, not sure how much different.
@TboneSRT
Жыл бұрын
@@johnh.9127 they do get a smidge more brake dust than the fronts (with these new front pads) but it's nothing like the fronts were before the pad swap! The brakes should be the same on both cars
@LBCchelsea1
6 ай бұрын
@@TboneSRTsome guy told me that I can’t have different pads on the front and back?also is it necessary changing the rotors at the front or can I jus change the pads?
@TboneSRT
6 ай бұрын
@LBCchelsea1 I've never heard of that before honestly. Most guys just change the fronts since they do most of the stopping and are much larger. The rears don't get as dusty. I'd go with just front pads and call it a day. But depending on how old or the condition your rotors are in, you may want to replace them as well so you aren't ruining the pads.
Пікірлер: 99