Great job, But Please protect your feet ! When cement is dry it contains calcium oxide, which is not particularly dangerous. However, when water is added to cement, calcium hydroxide is formed, which is extremely alkaline with a pH of 12 to 13. Normal human skin has a pH of 5.5; therefore, wet cement can produce alkaline (caustic) skin burns which progress and get worse without more exposure. A worker may have wet concrete on his or her skin for hours without feeling any discomfort; however, the cement is damaging the skin microscopically. Early identification of changes to the skin is important so steps can be taken to treat the affected area. Don’t assume the burn will not get worse. By the time a worker becomes aware of a burn, much damage has already occurred and further damage is difficult to stop.
@vote4republicans2024
5 жыл бұрын
Watching these guys work hurts my back.
@vildogarza1963
6 жыл бұрын
you guys are amazing, you made my Saturday night!!
@rcalzadilla
6 жыл бұрын
Around the world there are very hard working, industrious people but, those in power won't let them succeed.
@ManInTheBigHat
7 жыл бұрын
Having made a lot of concrete castings, I'm surprised that the thing survived that violent flip at the end. Especially considering the inconsistent mix. Kind of baffling.
@mlb556
5 жыл бұрын
ManInTheBigHat Could be how the Great Pyramid was built.
@arora_for_life
5 жыл бұрын
@@mlb556 lol
@alfaalfa33
7 жыл бұрын
Building in concrete is a very serious science, even just wrong water doses you get to reduce the strength of the cement even by 30% or more, if you make other mistakes you easily get to the disasters.
@robertcarver4295
7 жыл бұрын
Finally, somebody who understands the science. Thank you. Yes, I had the privilege of a very good engineering education at an Ivy League school, but it still boggles the mind to see so much done wrong in the field, not just in 3rd world countries, but in the US too. I should write a video book. I was the lead field engineer writing engineering letters for all the screw ups for an engineering company that signed/sealed 20,000 plans a year. I have seen it all. The worst was when we caught a cement block layer who decided he could save money by filling the filled cells with sand instead of concrete. He did that to 300 houses! We only discovered it when a drywall boom truck backed into the corner of a garage. The entire house fell down.
@stanleyjones2085
7 жыл бұрын
I have no engineering degree, but what I do have is 35 years in the construction business ranging from installing parking lots to buildings and I have seen so many screwed up designs, but the one that stands out to me the most has to be the parking lot with no entrance that they literally forced me to install! Guess the architect was smoking some good shit that day. But I do understand where you are coming from. I also came across a building that the block cells were filled with sand and some had nothing in them at all in the corners and of course they hired my company to fix this problem because the builder had filed bankruptcy the previous year. Some of the problems are a company gets so desperate to just to make payroll that they under bid jobs and find ways to cut corners.
@annac7364
7 жыл бұрын
My guess is that the first pour is a pure cement and water mix for a hard bottom face,then a stiffer mix,then wire in between..It`s a decorative concrete panel,not a suspended bridge or column. If you think you can show them how to make that panel much stronger ,more efficiently,make a video of you doing so and link to it here.. Bet you cant Mr Engineer.
@robertcarver4295
7 жыл бұрын
Concrete is mixed and poured correctly all over the planet, why do you think it is difficult? You cannot use pure Portland Cement, it will crack like a meth addict's teeth. Standard mix for 3000 psi concrete is 1 part OPC, 3 parts sand, three parts aggregate. When the cement is not at least 1-1/2" thick, then it needs at least 6,000 psi mix, which is simple, just double the OPC. The amount of water depends upon a lot of things, impossible to predict that until mixed because the sand or aggregate might contain some. So the only valid test is the slump test. Any supplier will have the cone, looks like a regular funnel. Fill the cone with the mix, dump it upside down on a flat surface. A 2" slump is perfect for most applications. What is so hard about that? The bag of OPC has these instructions on the back. What, you think it is rocket science? So tell me if what I described came anywhere close to what was done in this video. That was a ten inch slump for the first mix, which means it is worthless. The OPC separates from the aggregate and sand, no adhesion.
@annac7364
7 жыл бұрын
You talk too much!! Why is it so difficult to post a video to show us how its done in reality big boy?? Talk is cheap and by the time you produce anything of actual worth,those guys will have made another 100 meters of concrete fencing product!! Stop being a key board Google "engineer" warrior and post the damned video. Then I might show you more respect.
@sarcasmo57
6 жыл бұрын
So glad I took that ecstasy before making my concrete fence.
@k.ganesanganesan6825
5 жыл бұрын
Precast concrete. Maintain water ratio Maintain curing time Maintain public safety.
@vaclavguth6361
6 жыл бұрын
Tyjo moc pěkný, i pěkný nápad jak si to udělat sám, své pomocí.
@thorlong2983
6 жыл бұрын
Someone with OCD would go nuts watching this.
@bradwilson6601
6 жыл бұрын
I like how he starts with a slurry coat then a layer of stiffer mix. The dry sand to pull out excess moisture at the end is also interesting, he also salvages the sand/cement slurry, I wonder if that is used in the next mix? Thanks for the video!
@marcosgobira812
7 жыл бұрын
I suggest working with a table.
@AACPprecast
7 жыл бұрын
ok
@kenfisher9677
7 жыл бұрын
yes the consistency makes it really suspect. But the real sad part is the fact that they sell them for substantial prices and are probably paying the guy cents per hour. Of course the real problem is our unwillingness as consumers to make sure we are buying product from fair and reasonable manufacturers and not only for the lowest price.
@WoundedEgo
6 жыл бұрын
If that were me the first thing I would do is put that mold at waist height so I wouldn't have to work bent over all day. The weight of his own head in foot-pounds puts tremendous pressure on the discs at the base of the spine. However since he's working with one hand with his elbow on his leg helps a lot. Still, raise it up.
@frankjames4743
6 ай бұрын
Wow. That is very nice
@isenbergj
7 жыл бұрын
It's only a fence panel. Plus it's not like they have modern technology. Looks ok and am sure it will do the job.
@OffGridInvestor
5 жыл бұрын
Actually its FAR FAR FAR too much water in it. They could have done without the wire if they had a drier mix. Honestly I don't think they know a damn thing about concrete principles.
@captainheinie6355
6 жыл бұрын
That will do their feet and hands a lot of good.
@jtl1274
7 жыл бұрын
It's for decoration, not structural strength. Great craftsmanship. I would hire these people and two seconds.
@1Howdy1
6 жыл бұрын
You know - you keep making sense like this and they're going to toss you off the site.
@stevygee605
6 жыл бұрын
Thats a bit Racist dont you think>>Who made you slave master? He is advertising his product not his cast? No Pun Intended!! In India this man is classed as a Developer!! Vant to By Berry Chip?
@robertb7362
6 жыл бұрын
The title is pretty clear: precast concrete fencing panels. If it was for decoration - where would you set this up?
@1Howdy1
6 жыл бұрын
You could use these as privacy panels for a patio. Use as a texture and shadow detail in front of a wall, either attached to it, or offset in front of. Use as a landscaping backdrop. Lay flat as a border for a sidewalk or patio, planting ground cover within the lattice. The benefit of a panel like this is they allow light and air to pass through with lots of texture. When you build a structure like a house, or any building really, there's somewhat of a 90 degree angle between the ground and the panel of the wall. This box look might be what we want, but many times we use the wall panel as a canvas. Landscaping can be used as a medium - using basic art rules, like the rule of thirds, to create an aesthetic feature out of the wall. An example is to plant shrubs that will grow to 1/3 wall height near the wall and progressively smaller plants radiating out, so the landscaping appears to ramp up to the wall - creating a natural curve out of an artificial flat straight surface. Picture your average residential landscaping theme, with plants at the corners to break up the line. Now, imagine the landscaping in front of the house, but we were able to somehow remove the house without touching the landscape. The plants would look odd, they work with the wall to balance, like a picture frame improves the picture. When you have a full garden it can be so busy and full people get lost and miss things, they can't see the trees through the forest. Details like light colored concrete and red brick really work well to break up the green, add contrast, grab the eye, inject detail.
@flick22601
6 жыл бұрын
Great answer 1Howdy1.
@ronpirie
5 жыл бұрын
Remind me again why buildings fall down in some parts of the world ......
@uncleteam
4 жыл бұрын
Because they get carpet bombed by foreigners.
@uhoh38125
6 жыл бұрын
love this! wish I could buy a form!
@sikitiministries1351
Ай бұрын
Good day I am watching from South Africa. I would like to start mine, can you assist on how to get the equipment that you are using here
@g41thomas
6 жыл бұрын
Here is India no working gears required!!!!😀
@Akziis
4 жыл бұрын
Lol what are boots! 🤣👍
@jhanjacob1569
4 жыл бұрын
So nice and practical .
@yellowflash6319
Жыл бұрын
Please do a video about measurement this molding
@jeffcole5708
6 жыл бұрын
That's why you'll never get one of these guys sitting on the fence.
@EduardoRuiz-cm8ol
4 жыл бұрын
Your workers must be given safety gadgets ; boots , gloves to protect themselves.
@700Ratman
3 жыл бұрын
Don't worry, there is less than 2% cement in the mix
@carlosandino821
7 жыл бұрын
In Brazil is called Cobogó, but here is a cobogó apprimored.
@dhairyathakkar9669
2 жыл бұрын
Very interesting . What is the dosage needed to make the mix
@pameladayanacardososena5537
5 жыл бұрын
Mí pregunta es q es esa tierra q usan ? Q se ve q lo utilizan para darle conciencia al hormigón
@henryparker2987
7 жыл бұрын
Ce n'est qu'une rambarde, il n'y a pas lieu de s'inquiéter du dosage du béton! Moi je trouve ça génial.
@pacheco464
5 жыл бұрын
The forms are made of wood or steel?
@OffGridInvestor
5 жыл бұрын
Probably wood if it's india. But its the stuff inside that counts. Possibly silicone, maybe even hard wax.
@BuffaloDIY
6 жыл бұрын
I don't think cement on bare skin is a good idea at all! The guy needs some protective equipment.
@61riaz
5 жыл бұрын
Very nice what is size length, width, thickness, and what is ratio of cement concrete and sand thanks
@erisvaldobarbosa7918
Жыл бұрын
Oi boa noite onde comprar..es forma manda valor por favor
@manoelluizdeabreuferreira2681
Жыл бұрын
O que usa para não colar na forma?
@Mikdeelow
6 жыл бұрын
needs an apprentice to prefab the wire frames.
@jasonstocks6460
5 жыл бұрын
Very weak concrete unless some form of cement reinfocement agent or skeleton is used to strengthen the concrete. Otherwise it will fall apart in a short time,.
@Akziis
4 жыл бұрын
You didn't watch the whole video did you? 🤦♂️
@marcosgobira812
7 жыл бұрын
It is not necessary so much water, the mass of cement must be more consistent. Think about the concrete lifespan. Good luck!!
@AACPprecast
7 жыл бұрын
Thanks, noted
@kennethholland1502
5 жыл бұрын
Could have got a bigger trowel
@MultiMolesta
6 жыл бұрын
Where can I get those moulds, I want to start producing here in Lesotho
@shoharwadifebricetion
4 жыл бұрын
7621850355
@YvonneSchwartzYVON
7 жыл бұрын
music must go
@ManInTheBigHat
7 жыл бұрын
God help us, yes.
@jamesanderson-oc5kg
6 жыл бұрын
Its sucks. i would like to hear the natural sounds of working.
@Engineer9736
5 жыл бұрын
Which execution method do you advice? Firing squad? Or electricity?
@richh9904
6 жыл бұрын
We left the trees to work bent over? Try again.
@SharpEnuff
7 жыл бұрын
Better then mud huts
@AACPprecast
7 жыл бұрын
yes
@auspicious113
6 жыл бұрын
and making them on a slope all the concrete will run down one end
Obra muito bonita , bem feita , mas esse rapaz , de pés descalço sem proteção , o cimento queima , eu mesmo já me queimei , tem que usar luvas e botinas , pra lidar com cimento .
@AACPprecast
7 жыл бұрын
thanks for your advice
@user-vk5is6ee9z
6 жыл бұрын
لزصثب6قغثغثن
@AACPprecast
6 жыл бұрын
?
@vildogarza1963
6 жыл бұрын
good job!!
@786otto
5 жыл бұрын
Hard work.
@antoniosouto8465
5 жыл бұрын
muito bom poarabêns
@rajeevsirofficial8941
2 жыл бұрын
sir ye bihar ke siwan jila me aa sakta hain
@stoianaurelricky84
5 жыл бұрын
@ /// ABONEAZA-TE /// Daca ti-a fost de folos acest video//in curind postez video folositoare.
@cjayandoy6122
6 жыл бұрын
GOOD WORK, BUT THE BAD WORK HE IS NOT USING SAFTY LIKE BOOTS OR ANY SAFTY BODY,, FOR MAKING VIDOES,,, FROM EMPLOYER PLEASE DONT ALLOW TO STARTING WORKING, NO ANY SAFTY
@shaikdoula9292
6 жыл бұрын
good work what is cost for 10*20*50 house
@arshadsyed6628
5 жыл бұрын
This is probably India...it's good as long as it looks good structure integrity doesn't matter much...and human lives even less.
@ratanmedicos6430
7 жыл бұрын
I want to see a plant of precast H shape colour and wall Panel plant near delhi can you help me
@shoharwadifebricetion
5 жыл бұрын
RATAN MEDICOS 7621850355
@vikrampandit7884
4 жыл бұрын
Iska farma kaha milta hai
@shoharwadifebricetion
4 жыл бұрын
7621850355 call me
@harashop5097
3 жыл бұрын
It measures how many meters
@luptonpittman6520
4 жыл бұрын
How do I get a hold of these guys?
@AnAnEntertainment
4 жыл бұрын
Rất tuyệt 👍
@munnakumar-pr8yv
5 жыл бұрын
Iske baare me puri jankari chahiye
@snoopu2601
7 жыл бұрын
And that is why there shit is always falling apart I don't see how it all stays together?
@sabirdalai7080
3 жыл бұрын
Where I can get the frame of this
@MGszamanVlog
7 жыл бұрын
Hi, can I use part of your video to my compilation of the most interesting building projects ?
@AACPprecast
7 жыл бұрын
ok
@MGszamanVlog
7 жыл бұрын
Thank You
@nielsmith19
4 жыл бұрын
Where do we get the matrix from ?
@Noorstud
6 жыл бұрын
How to do the molding base?
@Mocking69
7 жыл бұрын
シャブコンっぽかったけど大丈夫なんですか?
@kpkp42
7 жыл бұрын
It bugs me that the reinforcing metal is just being laid in there as individual segments and not as a single welded piece of mesh
@amethysturanus6351
4 жыл бұрын
I am in Tanzania. I need panel moulds METAL type and pilar mould. Can I get the contact please.
@CulturedWhiteBoy
6 жыл бұрын
Does OSHA approve of the footwear? My bare feet hurt just walking on grass, let alone on a job site.
@AACPprecast
6 жыл бұрын
ok
@tajsongs5424
3 жыл бұрын
Mujhe ae lakhri ka har diseine farma sahie
@priyaranjansharma3860
3 жыл бұрын
हमको 10फीट ऊंचा और 65फिट चौड़ा 35फीट लंबा बांड्री करवाना है
@hards1969
5 жыл бұрын
Эта хрень после первой зимы превратилась в труху, но там где это делают +20 уже зима..
@aureasoares2538
4 жыл бұрын
A onde compro esse molde ?
@user-ol3nd4vx1f
5 жыл бұрын
Хороший вибростол )
@erisvaldobarbosa7918
Жыл бұрын
En saco da pra fazer quanto palca desa p falar ok
@francoisl.f.2809
6 жыл бұрын
ELXELENT
@smilesubrat8602
3 жыл бұрын
Hi
@fitacinta
7 жыл бұрын
Please translait the jockes.
@michaelnobibux2886
7 жыл бұрын
Please remove the annoying sounds!
@marjamada
7 жыл бұрын
Modern computers have volume controls and mute. Try using them.
@rustyrebar9647
7 жыл бұрын
Michael Nobibux It is supposed to be music, i think .Idiotic is it not?Just as the lame ass workmanship in the video. Being indian is no excuse for shoddy work and no safety...
@antonshkabara3090
6 жыл бұрын
Instructions from the Avasva site are perfect for beginners.
@garydouglass9577
7 жыл бұрын
Feet like leather. No need for steel toe caps! What the fuck, it's only a few toes haha
@AACPprecast
7 жыл бұрын
try to avoid
@garywheeler7039
7 жыл бұрын
Sprinkling or spraying their skin later with vinegar will help neutralize the cement. You can actually smell it working. If it smells like vinegar after it is on, you are using slightly too much.
@MrTuntan
5 жыл бұрын
What song is it? Need 2 downL.
@badshaandsonsprecastagency1864
3 жыл бұрын
Hellow I Can talk with you about this work
@rameshnath8605
6 жыл бұрын
ye frem kon si dukan m milta he batana plez
@shoharwadifebricetion
5 жыл бұрын
Ramesh Nath 7621850355
@pippaknuckle
6 жыл бұрын
How to get lung cancer.
@alolipa
7 жыл бұрын
Why do these people work barefoot
@AACPprecast
7 жыл бұрын
wearing sandals the leg will be Sweating
@babuji198
5 жыл бұрын
@@AACPprecast ur an idiot
@porimolshiddha1245
3 жыл бұрын
💪👍
@malakasmr1060
5 жыл бұрын
ممتاز
@samerayad1759
7 жыл бұрын
Waoooo
@AACPprecast
7 жыл бұрын
....
@raggybear7772
6 жыл бұрын
Health and safety in the UK u r taken to court for this,
@bonoyoutoo2746
6 жыл бұрын
RESOURCEFULL
@stepheng6514
5 жыл бұрын
Is it easier without boots on?Why do I even bother putting mine on to pour a little mudd?Fuck it...
@yadavbaijnath8823
3 жыл бұрын
sar hamen bhee baundree maarana hai.
@govindgupta9417
6 жыл бұрын
Sir iska Diy kahan par milega pls aderss send in Mumbai
@shoharwadifebricetion
5 жыл бұрын
Govind Gupta 7621850355
@phommanysoulivongxai162
4 жыл бұрын
ແບບຕີລາຍພື້ນ
@judsonclayto7813
6 жыл бұрын
dumb product... i saw a similar latticed fence just the other day already cracking from all the movements associated with wind... i was told that it had been installed within the last year...
@prasertduangnil9858
4 жыл бұрын
สุดยอดดดด
@salihkhansalihkhan614
5 жыл бұрын
Please don't play music again thanks
@robertcarver4295
7 жыл бұрын
This is just wrong from a lot of respects, first is how much water is in the mix, none of that concrete is consistent in terms of strength, all of it a hodge podge of bad. It would fail with the slightest jarring, I wouldn't buy anything from those guys. If you want to understand real precast products, look at how they make block.
@AACPprecast
7 жыл бұрын
this is one of the way for making concrete panels, this our oldest making method, new method are here kzitem.info?o=U&video_id=Pmix1mrpTkU thanks for educating
@jemckee
7 жыл бұрын
I"ve watched a lot of builders here in Korea use bricks to fill in the concrete structure of buildings. they actually put DRY mortar mix on the bricks, and add water and mix it together as they assemble the wall. Then they add layers of stuccco to make the walls complete. No hod carrying, no level string, just fill in the space with bricks. A bit sloppy, but it works. It's also easier to tear down with an excavator is 15 years when you want to put a different building there.
@AACPprecast
7 жыл бұрын
ok
@alfaalfa33
7 жыл бұрын
Robert Carver You are right. I wanted to write the same things before reading your comment, he put too much water and then it vibrates too much so that the materials are separated according to their grain size and they lose the cohesion
@stevenclark6209
7 жыл бұрын
Robert Carver am sure these guy's have there way and you will have your way but am pretty sure these guy's know there job and customer !!
Пікірлер: 246