Modification, in a vice I bent backward, the attachment that holds the fitting and two jam-nuts. That creates a straight line for the cable to the governor arm on my 79cc Predator motor. Otherwise it will run at an angle. Dan.
@user-so7bu4gt3t
Жыл бұрын
The focus in this video makes the Zapruder Film look like HD.
@GoPowerSports
Жыл бұрын
We've upgraded our cameras since this video.
@dyingforpie6879
3 жыл бұрын
Awesome guys just the stage i was at - and i was WAY off on my assumption opening the package i thought it went horizontal under the tank 🤣 and a bonus i see where to put the decal you sent me .
@GoPowerSports
3 жыл бұрын
Hope you enjoy, thanks!
@Tampaboys
3 жыл бұрын
Heck ya guys give that little engine some flow awesome big like and share from tbc
@maccstacc5000
2 жыл бұрын
I pulled up this video and had my 9 yr old son put it on himself... Thanks!
@GoPowerSports
2 жыл бұрын
Nicely done!
@fatbuddycat
3 жыл бұрын
Say what meow? Great shirt Taylor!! That's a good looking micro bike brother.
@KellerApparelCo
4 ай бұрын
Where can I buy this long sleeve tee!? So good.
@kevinthelegend619
3 жыл бұрын
Love the informational videos keep it up Go power sports 👍!!!
@Reckless_Ray
3 ай бұрын
What throttle cable was used in this video?
@gm_muscle0671
2 жыл бұрын
Installed the linkage bracket but when I go to pull the handle to start it a grinding noise can be heard. This isn’t from the engine running because it only happens when I’m starting it. Any helpful tips?
@GoPowerSports
2 жыл бұрын
Send a video of this to sales@gopowersports.com
@jacksonsingleton3395
2 жыл бұрын
I had the same issues and figured out they sent the wrong length bolts for the throttle linkage bracket. They are touching the fly wheel and caused some damage to it. I’m sure you are having the exact same problem.
@garymccausland1272
3 жыл бұрын
What main jet did you use after you installed that air filter
@alexlorusso
25 күн бұрын
Do you buy the adapter separate
@wyattcram4968
3 жыл бұрын
love the vid keep up the good work
@meanbean2434
3 жыл бұрын
2 questions when well you get your minibike suspension back in stock. And do you have linkage for a predator 212cc
@GoPowerSports
3 жыл бұрын
It'll be a few months until the front suspension is back in. And the 212 linkage is on our website, part #26410.
@meanbean2434
3 жыл бұрын
Ok thanks
@richirich1
2 жыл бұрын
I put the Predator 79cc on to the Monster Moto go kart. Everything I see is for the mini bike, but will this work on the go kart as well.
@ruhle1ta
Жыл бұрын
Just ordered my throttle kit... Will this work with the stock gas tank placement?
@iuploadvideoz
2 жыл бұрын
What do you do with the vent tube from the OHV?
@SCATGS
Жыл бұрын
did you figure it out i need help to
@WilliamArcher-vj5uz
10 ай бұрын
@@SCATGSme too
@racksofish
2 күн бұрын
Are you using the original carburetor?
@GoPowerSports
2 күн бұрын
Yes we used the stock carb.
@racksofish
2 күн бұрын
@@GoPowerSports awesome! Love the build. Just bought your kit and got it hooked up but don’t know if i should upgrade the carb now that my governor is off or keep the original still
@lukeschroll5038
3 жыл бұрын
Are you guys going to build a big brother to the rascal?
@GoPowerSports
3 жыл бұрын
Circle March 1st on the calendar :)
@lukeschroll5038
3 жыл бұрын
@@GoPowerSports I will be looking for it
@firehawk3860
2 жыл бұрын
would you guys sell just the linkage going from the carb up to the parf that the holes were drilled in?
@studioonthego6489
3 жыл бұрын
This video was very useful
@Idahoinsider
2 жыл бұрын
Do I need to put another filter on the tube coming out of the ohv box too?
@SCATGS
Жыл бұрын
did you figure it out i need help
@Idahoinsider
Жыл бұрын
@@SCATGS I did put a small filter on the tube coming out of the ohv box
@SCATGS
Жыл бұрын
@@Idahoinsider can you send the lik to the small filter and a link to a tutorial. sorry is alot to ask for
@Idahoinsider
Жыл бұрын
@@SCATGS it keeps deleting my post with the link. Have an IG? I can send it there.
@SCATGS
Жыл бұрын
@@Idahoinsider is fine i found a part for it thankyou tho
@greysonhoward8261
3 жыл бұрын
do you need a valve air filter to run it? i’m new to this and i was wondering because you did not put one on
@davidpayne2469
2 жыл бұрын
I bought this kit over a year ago along with stage 2 and a new motor still have not done anything with it
@GoPowerSports
2 жыл бұрын
Now's your chance.
@ikev60
3 жыл бұрын
Did you have to rejet the carb?
@GoPowerSports
3 жыл бұрын
We left the jet as is.
@firehawk3860
2 жыл бұрын
do you guys sell the OHV air filter? If so how much and in Red Color?
@SCATGS
Жыл бұрын
PLEASE RESPOND! I have it on but im worried about the ohv tube whare dose it go im confused and kinda mad
@devinlawson8313
Жыл бұрын
Did you find this? Could you send a link if you did?
@michaelmarquez2938
3 жыл бұрын
Where can I get a header pipe is it the same opening as the 212 cc?
@Cr125stin
2 жыл бұрын
What length cable did you use on this build. I’m about to place an order for this linkage kit but I’m going to need a cable too. Thanks for the video!
@GoPowerSports
2 жыл бұрын
The shortest one available, should be around 44"
@Montgomeryleather2
3 жыл бұрын
When will these be available to buy again?
@josephfrog8884
2 жыл бұрын
Where is that exhaust from?
@NATHAN_SIMPSON
3 жыл бұрын
Love your videos!!!
@stanlucas665
3 жыл бұрын
Will this setup work on the Mega Moto M80 with the 79cc motor
@kevinstott1317
3 жыл бұрын
Probably not. The MM80 is a clone of a different motor, a Lifan 80, I think. I have been unable to find any upgrade parts (stage 1, etc...) for that motor since Hot Rod Minibike shut down.
@stanlucas665
3 жыл бұрын
@@kevinstott1317 I purchased the frame from Mega Moto, and I’ve been piecing it together with my stepson. At this point we’re planning on using the predator 79cc motor
@kevinstott1317
3 жыл бұрын
@@stanlucas665 Sorry, I misunderstood. I have an MM80 and I bet it will work great since the carb on the predator hangs off the side of the motor instead of the back of it, like on a Lifan. A predator 212 fits on that frame, so there should be plenty of room. Good luck on the project! Great memories are made working on these with kids!
@stanlucas665
3 жыл бұрын
@@kevinstott1317 No worries for anything misunderstood. It’s all good
@kevinstott1317
3 жыл бұрын
link for the exhaust you are using on this?
@GoPowerSports
3 жыл бұрын
It was a Build Your Own with a Mini Muffler welded on to it.
Пікірлер: 65