Welcome back to the Gator Overland Channel. In today's video I will review the pre-built customized cap by JAGMTE, followed by a "How To" showing you a DIY way to similarly customize your own cap. Weather you buy pre-built or build yourself, this upgrade is and outdoor adventure game changer!
Feel free to contact us via email or check us out on facebook and instagram
Email: JKHartel3@gmail.com
Facebook: / jkhartel3
Instagram: @gator_overland
JAGMTE Pre-Built Cap Link:
Website
jagmte.com/products/ball-valv...
eBay
www.ebay.com/itm/Ball-Valve-P...
DIY Cap Upgrade Materials List (including amazon affiliated links):
VTR TR-416-S 1" Outer Mount Metal
amzn.to/33K3pdN
American Valve WM75LQTB 1/2" Washing Machine Valve, 1/2-Inch, Blue
amzn.to/34062IB
C4701 1/2 SXS COUP CPVC CTS
amzn.to/3bue4xv
www.homedepot.com/p/Apollo-1-...
Scepter 5gal 05177 Military Water can
amzn.to/3fkWtZU
Miltary Water can Cap Wrench
amzn.to/3tWEXk4
Food Grade NSF RTV Silicone Sealant
amzn.to/33KUHM2
Water hose Quick disconnect
amzn.to/2S2cufq
18” gear tie
amzn.to/3uR1lMY
Male hose repair connector
amzn.to/3okf6kJ
Water hose nozzle
amzn.to/3ye5XPg
Flexzilla garden hose (ideally something food grade safe)
amzn.to/3eOCQdu
*Optional* coil retractable garden hose
amzn.to/3tVPWtH
Bell bicycle hand pump
amzn.to/2RT3UiS
DIY Construction Steps
Step 1- Remove cap vent stopple and spout caps
Step 2- Install tank valve stem. All you need is the Tank stem, bottom gasket and nut. Applying food grade sealant to gasket prior to pushing stem through underside of cap is optional. Once stem is through cap, just thread the nut on the stem snug, plus 1/4 turn.
Step 3- Install Washer drain valve. If using Scepter brand cap, youll need to bore out the spout I.D. with 3/4" Wood/Metal drill bit. This is not necessary on off brand cap. Place valve up against spout as level as possible and hand thread into spout. The plastic is soft, but might take a bit of effort. Using a wrench as leverage can make this a bit easier. You can either thread in completely, or just before threading completely you can add a bead of sealant at the base of the valve to seal against the spout and then tighten completely. Apply sealant to plastic fastener nut and thread on to drain valve snug, plug 1/4 turn.
Step 4- 1/2" PVC tubing connection. Apply Teflon tape or sealant to drain valve threads and thread on 1/2"x1/2" socket x threaded adapter snug, plus 1/4 turn.
Step 5- 1/2" PVC dip tube. Determine your configuration for making a 17" dip tube. Couplings are optional if breaking down. Using sealant to affix is optional as well.
Step 6- Water can accessory attachments. Attached your choice length of hose, quick connect fittings, nozzle, hand air pump, and gear tie.
Time Stamp:
Intro- 0:00
Opening- 1:02
Why Scepter?- 2:15
Disclaimer- 2:40
JAGMTE Cap and How It Works- 3:10
How we use it- 4:05
Shower- 7:57
How To beginning- 10:24
Materials- 10:38
Tools- 11:03
Extras Add ons- 11:19
Step 1 Vent removal- 12:08
Step 2 Valve stem- 12:49
Step 3 Washer drain valve- 13:39
Step 4 PVC tubing connection- 15-15
Step 5 PVC dip tube- 15:34
Step 6 Water can accessory attachments- 16:05
Closing: 17:40
For other great Jeep, Offroad, and overlanding related content, check out these handles i follow:
@TrailRecon
@DirtLifestyle
@venture4wd
@LiteBrite
@TheStradman
@c130aviator
@JKGearandGadgets
@LifestyleOverland
@LifestyleOverland
@JLLIFEOFFROAD
@BuiltForDirt
@JeepGearGadgets
@OverlandishAdventures
@4-LOW
@wayalife
@Ronny_Dahl
@bayoudragons
Негізгі бет Тәжірибелік нұсқаулар және стиль Pressurized Scepter Water Can Upgrade *CAMP SHOWER* (JAGMTE Cap Review and How To DIY)
Пікірлер: 159