Hi guys I just wanted to Introduce to you my other Channel "Things to Know" - which i'm just getting started. It's a go-to channel for insightful worldly explanations, handy tips, and expert advice on everyday things and repairs of domestic items. Here is the link: kzitem.info/rock/O8P9x5kUZ44Fb11vanLFsg
@davidlong1786
Ай бұрын
I was glad to have found this. I had the replacement in about 3/4 of the way then tapped on the ring with a screw driver a bit before deciding to find some advice before I broke it. Pressing it in slowly one side at a time worked just as you said , thank you.
@jimjackson4256
11 ай бұрын
I’d like to give you two thumbs up. Thank you
@TheRepairSpecialist
11 ай бұрын
Awesome thank you
@leslierowell392
5 ай бұрын
Thank you so much. My 22 year old Murray push mower is back in form after purchasing a $3.50 replacement primer bulb. The Briggs and stratton engine has been outstandingly reliable.
@katydid2k
Ай бұрын
Just exactly what I needed, thank you! (Unfortunately had to buy 2-pk (one with hole, one without) for $10.69 (Home Depot), and could've paid less online, but just wanted the job done and the mowing, and done it is! Much appreciated.
@formonthills
23 күн бұрын
Thanks very much ! Just saved me buying a new mower 😃
@TheRepairSpecialist
20 күн бұрын
Awesome, thank you so much 👍👍👍
@nikolajhurtigkarl
Жыл бұрын
Thanks for the useful tip. The bulb came out easily following your instructions.
@braveworld2707
4 ай бұрын
*Thank You* so much for this video. The primer bulb is less than 4 years old and the damn thing takes between 30 and 40 seconds after pressing it in before it resets for press number two and the same for press number 3. That red crap they use for the bulb is a pain. The primer bulb on my Ryobi line trimmer is older and is still like it was when new. *Thanks* again. Greatly appreciate this. 👍
@TheRepairSpecialist
4 ай бұрын
Thank you for your comment and kind feedback. Craig 👍👍👍
@tomaroni6670
3 ай бұрын
I'm shocked because of 2 things...#1 it took 24 years for the B&S motor's primer bulb to finally fail on my weedeater 22 inch push mower and...#2 with your help my new primer bulb that only cost a couple of dollars was replaced in less than 5 minutes! I saw no need to buy a second primer bulb to replace this one when it goes out because at 66 the odds are that I won't be around in 25 years...Thanks again and Happy Trails!
@RikJSmith
Жыл бұрын
Great Video !! Thank You so much for sharing your Knowledge . You definitely saved me from a lot of problems and the high price of a Repair Shop . I hope you're doing well and staying safe . I'm Rik from Upstate New York . I'm looking forward to looking at all of your Videos to learn a lot more from you . Stay safe . 🎸
@ypure3859
2 ай бұрын
thank you! Bloody silly design that only specialist tools can remove
@Finlanderfive
23 күн бұрын
Thank you for excellent and clear advice 👍👍👍👍👍👍👍👍
@TheRepairSpecialist
20 күн бұрын
You are welcome! Thank you for your kind feedback. Craig 👍👍👍👍
@mostlymoparih5682
Жыл бұрын
Excellent. Happy Motoring or mowering.
@the_langss
Жыл бұрын
Thanks for the Video.... I had no idea how to get that thing apart...And as it turned out one side was glued in from the paint, so I surely would have screwed up the Carburetor even with the right tools. Thank You, Thank You, Thank You....
@tonyg6334
3 ай бұрын
Shoutout to this guy 🙌🙌
@TheRepairSpecialist
3 ай бұрын
Thank you so much
@maradavila4400
Жыл бұрын
Thank you for your video and knowledge!!
@snteevveetns
Жыл бұрын
Thank you for the reminder. My bowl was dried out ended up being the problem…. Easy fix ;)
@bobi2582
Жыл бұрын
My old B &Q mower suddenly stopped. It restarted but stopped after a few seconds. I thought it must be a blocked jet so took them out and cleaned with WD 40 and all ok. Re assembled and still the same. I then unscrewed the primer bulb from the carb and it starts and runs on. Replaced the bulb with one off another mower and it dies. So it will only run with the primer bulb off. Any clues? I can blow through the jet into the carb and it seems clear.
@fionanewsome7346
2 жыл бұрын
Thanks so much for the information. Well explained with a great video.
@porschecarreras992cabriole8
6 ай бұрын
Why some primer bulbs have hole and some not? In your video the starting picture shows one with a hole but the one you replaced has not hole. I just don’t understand how a bulb with hole can work
@Nick-jz9yz
Жыл бұрын
Thanks for this!
@juangil-xq9ng
4 ай бұрын
MUY BUEN VIDEO.....ME GUSTA COMO DE UNA FORMA TAN SENCILLA SE PUEDE CAMVIAR ESTA PIEZA ...MUCHAS GRACIAS POR QUE ESTO ME SIRVE MUCHO ..
@christopherkanuk2546
Жыл бұрын
Thanks so much
@ringsidejudge4302
Жыл бұрын
A real good video . I discovered this channel and have used the info several times of late . Just a small question ,after replacing primer bulb iI have noticed a slight drop of revs , for a few seconds . My Hayter 47 is 27 years old and usually starts first time , but after bulb replacement sometimes it starts for a few seconds and stops . It always goes on second attempt . Any ideas would be great , or maybe I have not have installed bulb properly . Thanks for tour opinion in advance .
@Superfandangoo
Жыл бұрын
Top man, thank you 👍
@_ThierryAndre
3 ай бұрын
Worked! Thanks mate!
@unclelarryboy1608
2 жыл бұрын
Thank you for the info.
@Schroefdoppie
3 жыл бұрын
1:39 ..as I'm watching this, "surely you can use a deep socket for that". 1:56 Oh..nevermind. 😂 Great video!
@tucsonmclean5138
Жыл бұрын
Nice real nice
@norincobro6421
10 ай бұрын
Thank you.
@TheRepairSpecialist
10 ай бұрын
You're welcome! 👍
@bevnfred
2 жыл бұрын
This works.
@bobcat409
3 ай бұрын
Perfect
@TheRepairSpecialist
3 ай бұрын
Thank you 👍
@marshallborder9089
3 жыл бұрын
Great video , thanks from Jonesboro Arkansas USA .👍
Пікірлер: 40