Looks like a good product and definitely a good video. I thought I’d have to go under the headliner to tighten stuff. This video has sparked my interest in this rack and installing it myself. Again, a good explanation. Would have liked to see the front hole drill and install, but I think I could figure it out. Thanks 👍😎
@CBIOFFROADFAB
2 жыл бұрын
Awesome! Let us know if we can help with anything else. We are a phone call or email away!
@jon7926
9 ай бұрын
I would use stainless bolt n washers to mount it.
@smoothrider7677
2 жыл бұрын
Awesome video on installing these racks. I’m patiently waiting for one of these rack systems for my 2022 king cab Frontier!
@nathanwright1031
2 жыл бұрын
Sweet sounds good!
@02PSU
Ай бұрын
As I am two holes deep into installing this on my new 2024 Frontier Pro 4X, I think to read my owners manual and find the location of the side curtain airbags. The owners manual states that “the curtain air bags are located in the side roof rails”!!! This, to me, is exactly where you are required to drill!! I’m hoping I just didn’t eff one of my safety features of my new truck. I’d take caution in purchasing this roof rack, unless I’m proven wrong.
@CBIOFFROADFAB
Ай бұрын
You should be just fine. We recommend controlling the depth of your drilling so you don't have any issues with any part of the factory roof but the side curtain airbags are off to the side more so there shouldn't be an issue. If you were to remove the door seal trim and slightly pull down the headliner you will see the side curtain airbags... They are tucked tightly in to those side rails right where you want them to deploy.
@02PSU
Ай бұрын
Thank you for the prompt reply. I’m taking my time and pushing forward.
@SA-hk8xj
2 жыл бұрын
Looks like a good product and definitely a good video. I thought I’d have to go under the headliner to tighten stuff. This video has sparked my interest in this rack and installing it myself. Again, a good explanation. Would have liked to see the front hole drill and install, but I think I could figure it out. Thanks 👍😎 Glad you guys are making more stuff for the 22 Fronty 👍👍
@CBIOFFROADFAB
2 жыл бұрын
Thanks!
@allthingsm
Жыл бұрын
Just ordered this and a set of Rock Rails from you today. Great video on installation I'm considering using self leveling Dicor lap sealant that's used on RV roof tops instead of the silicone.
@02PSU
Ай бұрын
@@allthingsm Did you install your Prinsu on a Nissan Frontier? Any side curtain air bag issues?
@02PSU
Ай бұрын
I’m currently installing this and holy heck, this is difficult. I’m drilling into my truck now and 1/4” sunk easily, all bits after up to 3/8” bit does not. I’ve been cursing Nissan and myself for over six hours and only have two out of 10 holes complete!!!! Update: Have a professional install this for you.
@CBIOFFROADFAB
Ай бұрын
Quality drill bits will help tremendously. Also make sure you start small and work your way up incrementally. The last item that will help tremendously is using cutting lubricant and using the slow setting on the drill. Once you have the initial hole drilled it should be quite simple to work your way up to the 3/8" bit. Give us a call if you have further issues or questions and we would be happy to help!
@02PSU
Ай бұрын
Thank you. I’ll be back at it today and update you.
@02PSU
Ай бұрын
Are airbags in play with doing this or any wiring? Just thinking about these things.
@CBIOFFROADFAB
Ай бұрын
@@02PSU No you shouldn't need to worry about the airbags. Use a KC wire hider to run your wiring down the windshield and into the engine bay for any roof rack lights.
@02PSU
Ай бұрын
@@CBIOFFROADFAB I meant any wiring I need to be concerned about when drilling the holes? I’m all done now and it came out great. Now, let’s hope I get no water in my headliner. I was generous with the RTV.
@augustusandrada3930
9 ай бұрын
I will 💯 buy this if there is certified installer here in SoCal. I got P4x 2023 baja color.
@PrinsuRacks
9 ай бұрын
We have plenty of install shops to recommend. Give our customer service a call and they will get you the numbers of the closest ones to you.
@edc_7321
2 жыл бұрын
When you put the epoxy in to fill the spaces, are you going around the plus nut, or are you filling the entire space and pushing the screw through the epoxy?
@PrinsuRacks
2 жыл бұрын
We like to fill the entire space so it gets in the threads as well just to ensure there is no chance of leaking!
@mafosa9563
Жыл бұрын
you could put light bars all the way around the rack!
@BrokeSpaceLaser
2 жыл бұрын
Looks awesome! Not sure I trust myself to install it though. lol
@CBIOFFROADFAB
2 жыл бұрын
Its really not too bad. We can also install it for you or recommend an install shop we work with in your area to do it.
@foreverbeasty1534
5 ай бұрын
@@CBIOFFROADFABany where near Yonkers, NY? I would love to buy this but I can’t trust myself to install this.
@ericpowers2469
2 жыл бұрын
You’ve never done an install on the previous generation Frontier, I’m assuming it’s the same?
@jacobman429
2 жыл бұрын
Nice! Do y’all install? And if not, are there any body shops near y’all in Idaho I can take mine in for installation?
@CBIOFFROADFAB
2 жыл бұрын
Yes we do installations. Give our team a call and they can set that up for you.
@edc_7321
2 жыл бұрын
Does the rack come with the plus nuts and all of the washers you used as spacers?
@CBIOFFROADFAB
2 жыл бұрын
Yes it sure does!
@kurt6867
11 ай бұрын
Why do you chisel out the foam instead of just drilling it?
@bradfordcristancho1945
Ай бұрын
Do yall have any roof racks that could fit on a 2003 frontier
@CBIOFFROADFAB
Ай бұрын
Unfortunately not at this time.
@michaelharrison8517
2 жыл бұрын
Is it compatible with the sunroof ?
@CBIOFFROADFAB
2 жыл бұрын
Yes it is!
@tenncutt
2 жыл бұрын
How about drill stops on your drill bits so you don't accidentally drill through the headliner?
@PrinsuRacks
2 жыл бұрын
Yes, that would be a really good idea if you have them!
@DustinB855
Жыл бұрын
Just do the tape method where u wrap piece of tape around drill bit at set distance
@mikeblarowski6546
2 жыл бұрын
Got my rack guys! The first two back holes were easy and hours and many drill bits later I'm still struggling to drill the rest of the holes past 1/4" diameter to the required 3/8" diameter despite using the most expensive bits I can find. The video made it look way too easy. Any drilling tips for this almost 1/4" thick frontier roof ?
@tenncutt
2 жыл бұрын
1/4" is nothing. Invest in good bits
@patriotstateradio5941
Жыл бұрын
@@tenncutt Its not the fact that its 1/4 of an inch in thickness - its the fact that this is a weld line for the body and several panels overlap here. You may have to grind holes to size since the metal is insanely hard after welding.
@02PSU
Ай бұрын
I’m currently installing this on my ‘24 Frontier Pro 4X and it’s a mf’er. I must be hitting every weld point.
@troyenomi
Жыл бұрын
Do you have one size fits all, or can you get this for the Australian 2021 nissan navara I would love to have on my Ute!
@PrinsuRacks
Жыл бұрын
Unfortunately, we do not offer a rack for your vehicle. We hope to continue to grow and offer products for all vehicles.
@benbarber3093
Жыл бұрын
Ive got one brand new in the box. Problem is i have a 07 frontier 4x4 crew cab. Will it fit on there?
@PrinsuRacks
Жыл бұрын
Hey there! If you purchased the Frontier rack designed for 2005-2021 models it will fit. If you have any other questions do not hesitate to reach out to our customer service team.
@personal-jarretttownsend5566
Жыл бұрын
with the light bar cut out how big of a light bar does this fit? is it a 30in like the covert bumper?
@PrinsuRacks
Жыл бұрын
The Nissan Frontier roof rack is available with the 40-inch cutout or Standard option.
@felixfigueroa9840
2 жыл бұрын
So nothing from the interior has to be removed ?
@PrinsuRacks
2 жыл бұрын
Nope!
@jasong5353
2 жыл бұрын
There’s no way I trust myself enough to drill holes in a new truck. 😳
@CBIOFFROADFAB
2 жыл бұрын
We can install the rack for you or recommend a dealer or install shop to help!
@UTVPOWERSPORTS
2 жыл бұрын
@@CBIOFFROADFAB who do I reach out to for help installing?
@PrinsuRacks
2 жыл бұрын
@@UTVPOWERSPORTS You can give us a call or email us at info@cbioffroadfab.com
@franw51
2 жыл бұрын
Pre ordered and waiting on mine. When are they shipping?
@CBIOFFROADFAB
2 жыл бұрын
They should ship out next week!
@mikeblarowski6546
2 жыл бұрын
Did yours ship Fran? I ordered mine on June 21st and was just told that I'm probably looking at the end of July shipping for this Frontier rack
@CBIOFFROADFAB
2 жыл бұрын
@@mikeblarowski6546 These racks are shipping within a week or less. I'm sorry but possibly our customer service team member miss-understood the question or rack you were referring to. I have verified this with production as well as shipping so we should be good!
@mikeblarowski6546
2 жыл бұрын
@@CBIOFFROADFAB The customer service team just replied (without signing their name) with this: "Our 2022 frontier racks were just released recently and are still technically in pre-order, so the lead time on them is going a bit different."
@CBIOFFROADFAB
2 жыл бұрын
@@mikeblarowski6546 Good to know! Looks like we haven't all connected on this message. I will follow up with the team and make sure they are on the same page. Thanks!
Пікірлер: 71