Those cross beams bow and bounce with minimal weight on them. I purchased this item for my 2017 Tundra. I put two 27+ lb. Each Trek biles and they bow the beams to the point you can hear cross beams hitting the roof. Not worth $1000 unless you buy them ONLY for looks then they are awesome
@andreww5773
5 ай бұрын
How come it's all imperial hardware on an otherwise metric truck?
@TheVettekid
2 ай бұрын
You know what would be better than this video PAPER INSTRUCTIONS I can have in the shop and get dirty while I’m working on the vehicle not going back and forth from computer to vehicle
@timeng4491
Жыл бұрын
Do you need to use all the crossbars if you're not loading on heavy weight? It would be nice to keep the pano sunroof view less obstructed until you need the extra support
@brettcovington8838
Ай бұрын
Do you have to take off the headliner first for this? Or do you just try not to drill through it
@casey7223
2 жыл бұрын
How close to the curtain airbag harness does this get?
@CBIOFFROADFAB
2 жыл бұрын
Not close but you do want to pay attention during installation.
@anthonyle8516
Жыл бұрын
it’s harder to drill holes for 2022 trd pro tundra with panoramic roof the frame / holes you will be drilling has reinforced steel or metal
@bgirdler
11 ай бұрын
It fits with the panoramic sunroof, but will there be enough room for it to open and close?
@swoopjunky
2 жыл бұрын
Question. You didn’t mention how deep to drill the 3/8 drill bit. What’s the depth on that please. Should we use a stop bit for a specific depth. Thank you
@CBIOFFROADFAB
2 жыл бұрын
The roof is roughly 1/4" thick so I would drill no more than that to get through it. A stop bit is a great option or mark your standard bit with tape to set the depth.
@vinnieraventotem9541
6 ай бұрын
What is the torque spec on the nuts to crimp them into place properly? and what is the torque spec for the final bolts?
@manuelvegajr4111
6 ай бұрын
TIGHT BUT NOT TO TIGHT
@TheKroppDuster
2 жыл бұрын
Don't forget the Double Cab crew! Any idea when you're going to start with the roof & bed racks for DC Tundras?
@CBIOFFROADFAB
2 жыл бұрын
That model is coming!
@justonemorecast
2 жыл бұрын
Why can't you peel off the weather stripping and use the holes that are already there?
@CBIOFFROADFAB
2 жыл бұрын
That is because there are no factory holes under that piece like there are on the Tacoma.
@philipnguyen2529
2 жыл бұрын
Where can I buy the automotive black silicone?
@JohnBowen-fe3jb
Жыл бұрын
Amazon, Lowes, Home Depot. Amazon had full size tubes, Lowes and Home Depot had smaller tubes you would hand squeeze.
@UTVPOWERSPORTS
2 жыл бұрын
Where’s the 2022 frontier rack??? The frontier has been out a lot longer than that tundra?
@CBIOFFROADFAB
2 жыл бұрын
Stay tuned it is almost here!!!
@alexreichert
10 ай бұрын
Holy SH*T! Drilling the holes is insane!!! This is not an easy installation!!!
Пікірлер: 22