You can also use another print roller to press the lino down onto the paper. It works really well at evenly applying pressure in my experience.
@smishstudio
Жыл бұрын
Ooo, I hadn’t thought of that. Great suggestion!
@kelsey.grace_
3 жыл бұрын
this is super helpful! I’m super rusty with printmaking and this is a perfect video (and little series) for remembering all the important steps and tips!
@smishstudio
3 жыл бұрын
Thank you! 😊 It was kind of hard for me to break it down into just the basics. I hadn't realized how much is constantly going through my head at each step!
@Timrathmore
3 жыл бұрын
I liked your input on talking about hearing the noise of the ink and the fine grainy look to know the ink was spot on ready as you rolled the Brayer!!....... my long retired professor of art said the same thing. A little differently though with a ruspy and authority voice. Brings back alot of memories. Your doing really good work.
@smishstudio
3 жыл бұрын
I feel like I could hear my print professor saying it in my head as I said it out loud haha
@jojossecretrainbow2932
Жыл бұрын
this is THE BEST tutorial by far!!! thank you so much for taking the time to really explain the tiny reasons throughout the process. feeling a lot more confident to re-attempt now. and your ferns turned out beautiful!
@smishstudio
11 ай бұрын
THANK YOU! I'm happy they helped!
@mbfrezon
2 жыл бұрын
Thank you so much for this series - your views of the ink on the glass surface and on the block itself were very helpful. Other folks had mentioned the sound of the ink but seeing it was useful! Look forward to trying this.
@smishstudio
2 жыл бұрын
Glad it was helpful! Good luck!!!
@CVW74
5 ай бұрын
Brilliantly made video's, pts1,2 and 3. I didn't really remember how to create these prints. Your tutorials are so good. Thank you
@smishstudio
4 ай бұрын
Thank you! Good luck with you're prints!
@susanzoefelix6631
10 ай бұрын
I found your videos helpful for a recap after many years not making any linocuts
@MD-flyhigh
2 ай бұрын
This is a wonderful tutorial! Thank you so much. Very helpful 😊
@cynthiavickers8099
2 жыл бұрын
Thank you soooo much for this tutorial series! It's clear, concise, and I'm happy you showed both a baren and a spoon :-) Your explanation of rolling out the ink is super helpful! You're an excellent teacher. Can't wait to give it a go. Cheers!
@smishstudio
2 жыл бұрын
Aw, thank you! Good luck on your print journey!!! I hope you enjoy it too
@ichselbst6609
Ай бұрын
Thank you very much for this detailed tutorial!
@annmariethomas9968
3 ай бұрын
Great series on introduction to linocut printing. I’m going to give it a try. Thanks!
@kellyganser9778
2 жыл бұрын
Brand new to printing and yours is the first video I've watched. I can see where your hints (sanding the block, appropriate appearance/texture of the ink) will be helpful. And Monstera Deliciosa is my favorite plant :) Thank you - cannot wait to begin!
@smishstudio
2 жыл бұрын
Hope it went well for you and glad my video was helpful!
@aemxsy9412
Жыл бұрын
Next week I am going to try lino printing for the first time and I found your videos really helpful, thank you. Your prints came out amazing!!
@eloisefischer-fortney9107
6 ай бұрын
This was such a great, informative little series! Thank you!
@douglaswenn424
Жыл бұрын
Maybe use a wooden rolling pin at final stage of pressing?
@smishstudio
Жыл бұрын
Great idea, but I’ve never tried it. I know someone who uses a clean ink roller to help with hand printing. Depends on the thickness of the paper though. Thinner papers might tear on the edges of the block if you’re too rough.
@_Ragnarocket
2 жыл бұрын
I think I need a bigger roller I did an A2 print last year my rollers ridiculous. That salty print texture I think adds to it always love how they come out different and people buy different ones for different reasons I've found.
@smishstudio
2 жыл бұрын
Yeah, a wider roller would be more efficient for larger work! I personally like the salty ones too, but only a little bit for extra flair.
@akshz.413
2 жыл бұрын
Thansk for sharing 🙂 9:49 This wowww moment.. yes 10:31 The salty texture actully looks good
@johanrobson4593
2 жыл бұрын
Thank you very much. Easy to understand. The print is beautiful. Didn't notice the upspeak ;)
@TERRYBIGGENDEN
9 ай бұрын
Really excellent again. The best demo I have ever seen. :-)
@karensheehan4885
3 жыл бұрын
Thank you for this! First set of videos I’ve watched on the process and they were clear, easy to follow- I’ll give it a try!
@smishstudio
2 жыл бұрын
You’re welcome! I’m glad they’re helpful!
@romanmosaics
2 жыл бұрын
Ah crap! I have made some linocuts of simple patterns I have in my mosaic kits to stamp the patterns onto the boards and for some reason I thought you added water to the ink 🙄 No wonder it wasn't working out that well! I think I need to go over all three of these videos so I get it right 😆👍
@hodah
Жыл бұрын
thank you for these tutorials. They're informative and well photographed/edited. No small feat!
@nunah565
7 ай бұрын
I'm doin intro to printmaking for a college course n we use retarter it prevents the ink to dry faster.
@yawantwi7300
9 ай бұрын
really cool! super helpful and a lot easier than i remember :)
@maximf.5537
Жыл бұрын
very helpful series, has gotten me into lincut printing
@smishstudio
Жыл бұрын
Love to hear it!
@LindaMcRae42
8 ай бұрын
Such a wonderful tutorial! Thanks so much!
@greatartistprogram7803
Жыл бұрын
great tutorials! thanks. Have always loved how this looks and wanting to try it out with my students. great job
@smishstudio
Жыл бұрын
Thank you! I say go for it! It’s a fun process to learn.
@a.r.3742
2 жыл бұрын
Great videos for a total newbie. I am wodering why you place the block facedown, rather than applying the paper to the top of the block? I would think that getting the placement right would be easier if I was applying the paper to the block. Anyway I really appreciate these videos.
@smishstudio
2 жыл бұрын
Thank you! I’m glad they’re helpful! I have different methods for aligning the paper with the block, but this method works for a quick registration. It’s not my favorite, but it’s how I first learned to do it!
@harith_the_struggler
2 жыл бұрын
This is so interesting, I'm in agitation to try this out
@WARdROBEPlaysWWII
2 жыл бұрын
Nice tutorial
@smishstudio
2 жыл бұрын
Thank you!
@kasiamotyka9122
2 жыл бұрын
I absolutely love all of your tutorials, those are incredibly helpful!! I have a question regarding printmaking process, when you do a whole print series do you wash your linoleum and brayer in the meantime? Or do you just add more ink and continue printing? I'm using oil based ink, but after making a couple of prints some of them turn out pretty grainy/salty, so I wonder would it be better if I cleaned linoleum and brayer after let's say 3-4 prints? I have no idea, but at the moment I'm quite fed up with the whole process and faaar from perfect prints, I'm not good at it and it's so frustrating :(:( Nevertheless, I'm a huge fan of your work, you're so talented!!
@kephaombati6310
2 жыл бұрын
Excellent tutorial Smish, I think the salty areas were caused by the sanding of the lino block. I clean it with a damp cloth before I trace my designs, Impressive though.
@mathildelinnea
Жыл бұрын
Sooooo beautiful!
@Tinatime532
2 жыл бұрын
Thanks for sharing ... 🥰🖖🤗❤️
@smishstudio
2 жыл бұрын
Thanks for watching!
@mult1coloured
2 жыл бұрын
Maaan what a great tutorial I'm excited to try this!
@smishstudio
2 жыл бұрын
Thanks! I hope you enjoy the process!
@Slampty
2 жыл бұрын
Thanks just re discovered this type of art and I love it. Your video is really helpful.
@katmiller51
Жыл бұрын
Thank you for this!
@CedarHollowCards
Жыл бұрын
Super helpful and inspiring.
@smishstudio
Жыл бұрын
Glad you think so! Thanks!
@netherjoshua
Жыл бұрын
ahhh that was so cool!
@AyushmaanSen
2 жыл бұрын
This really very helpful
@zoeylife2
Жыл бұрын
So great!!!
@hippiegoatdairyconsejossob3267
Жыл бұрын
Love this I was trying to remember the name I did it high school in TX I am from Costa Rica I do art and print on tshirts but like this lol And I was wondering the name Thank u I will try this on cloth For my western art Hugs
@smishstudio
Жыл бұрын
That’s awesome! Good luck!
@ivanadancova3991
7 ай бұрын
Hi @smishstudio! Thanks for your tutorial, it was very well done. I was wondering about the cleanup process of the glass- do you reuse the same glass/do you just wash the ink off after use?
@smishstudio
4 ай бұрын
Yep! I keep using the same glass. I have a few that I've scavenged from different things like broken frames or glass tables. I just use mild dish soap and warm water to wash them. I specifically use an ink that is water/soap washable to make it easier for clean up.
@lenanana8
2 жыл бұрын
Quick question: how do I know what linoleum boards to use? Here they have pink and green ones, and honestly I'm looking for one that's completely biodegradable. Any advise would be great. This series on linocut printing is a lifesaver! I've just started linocut to use it for my small handmade business and your videos have been super helpful and informative. Thanks a lot and happy printing!
@illaisland
2 жыл бұрын
Great video! Thank you for sharing your tips and tricks! You mentioned that the ink you are using dries a little quickly and that you would attempt printing with your favorite ink instead in order to get better results. Would you mind sharing which ink you meant was your favorite? I looked through your amazon links but they seem to be the same inks you were using in the video.
@smishstudio
2 жыл бұрын
Yes! My favorite ink is Cranfield Caligo Safe Wash Relief Ink. I swear by it.
@radioactivebabushka
3 жыл бұрын
These are fantastic videos. Thank you so much for the time you put into them! I really love your work, esp the mushroom prints. I'm pretty new at linocut and printmaking and am trying to figure out registration jigs. I definitely need one, but am struggling to make one that works the way it should. Do you have any advice on it? Or any videos that mention registration that I've overlooked? :)
@smishstudio
3 жыл бұрын
Thank you 💖 Congrats on starting your print journey! I don’t have a specific video that goes over how to make a registration jig, but I think I make one in an earlier studio vlog. I wish I knew which one!
@radioactivebabushka
3 жыл бұрын
@@smishstudio Thank you! I think I found the one you're talking about. I don't have a press, so I'm just going to make a couple left corner-type situations out of some mat board. I think I have it figured out? We shall see. :)
@Timrathmore
3 жыл бұрын
Excellent work!!
@smishstudio
3 жыл бұрын
Thank you 🙏🏻
@elvismemphisgs
2 жыл бұрын
So Good
@deepaklamatamangnepal1980
2 жыл бұрын
Hey thank you ,thank you very much its too helpful video .. can we use acrylic or fabric pigment instead of this ink ..?
@smishstudio
2 жыл бұрын
Any ink that is made for block printing will work for this process!
@deepaklamatamangnepal1980
2 жыл бұрын
@@smishstudio thank you very much 💐💐
@dianep3071
11 ай бұрын
That is to cool
@elizabarfable
2 жыл бұрын
Thank you so much for making these videos! What kind of ink is your favorite non water-based ink?
@smishstudio
2 жыл бұрын
I love using Caligo Safe Wash Oil Based inks!
@robertjohns6008
10 ай бұрын
what is the protocol with printing with blocks that have been inked in the past? Is that possible? Advisable? is there a cleaning process?
@smishstudio
4 ай бұрын
You can keep printing with previously used blocks. There could be an issue with printing if there's an uneven layer of ink left on the block or some of the details were filled in with ink. You can wash/clean your linoleum blocks with lukewarm water and mild soap. I'd recommend trying to keep the back dry, and pressing the block flat with a heavy book after washing. It's also good practice to print off excess ink onto scrap paper or newsprint at the end of a print session.
@andreab425
3 жыл бұрын
looks great
@smishstudio
3 жыл бұрын
Hey thanks!
@bettinade6831
2 жыл бұрын
Thank you! Such an inspiration :) ♡
@smishstudio
2 жыл бұрын
You’re welcome 😁
@Dilllie
3 жыл бұрын
Great Video!!!!! Keep it up!!
@smishstudio
3 жыл бұрын
Thank you so much 🥰
@mackenziev448
11 ай бұрын
How do you clean the block when you’re done printing?
@Dianadraws
2 жыл бұрын
THATS GREAT THANKS *
@megsewinginspiration5297
Жыл бұрын
I learnt/ was taught that it looks like orange peals
@dianep3071
11 ай бұрын
If you want to print on cloth. Do you use cloth paint ? Or what
@wendl15
Жыл бұрын
Do you wash the water based ink off of the block? I wonder if it builds up. Beautiful design and prints.
@smishstudio
Жыл бұрын
I only rinse my lino blocks. I don’t wash the wood blocks since it will cause warping. You can keep printing with newsprint paper to get the extra ink off wood blocks. Don’t roll anymore ink on tho. And thaaaaaank you 😁
@im_cool_lol
Жыл бұрын
hey just curios what has to be cleaned and how do you clean it ?
@im_cool_lol
Жыл бұрын
also thank you alot for posting these helpfull and detailed videos :)
@smishstudio
Жыл бұрын
The block and printing tools need to be cleaned. Basically anything with ink on it. Just rinse tools with warm water and a little soap. The block can be rinsed with cold water and a little soap if needed. Try not to get the back of your block wet. Press the block flat with a book while it drys so it doesn’t stay warped.
@im_cool_lol
Жыл бұрын
@@smishstudio Thank you 🙏
@mpv9866
Жыл бұрын
Well done, thank you! What type/s of ink can be used that dries less rapidly?
@smishstudio
11 ай бұрын
I personally love the Caligo Safe Wash Relief Inks made by Cranfield. They can be a little more pricey though.
@sabriel7326
3 жыл бұрын
Do you clean the print-block after printing?
@smishstudio
3 жыл бұрын
Yes! I print 3-4 prints without inking up the block to remove excess ink. Sometimes I wash it with warm water and a tiny drop of dish soap if I really need to get more ink off. It’s ok to let some ink dry on the surface as long as it’s not clumps or uneven.
@antoniaarbeiter7221
3 жыл бұрын
thank you so much, this was very helpful. Do you have good experience with printing with a larger format?
@smishstudio
3 жыл бұрын
You're welcome! I print 8"x10"s and 12"x16"s, but nothing much larger on regular basis. I've been printing smaller blocks (5"x7") lately because I just had some lino I needed to use up!
@natalied662
Жыл бұрын
Is it reusable like how do you clean it
@smishstudio
Жыл бұрын
The block is reusable. Just rinse with cold water and maybe a tiny amount of soap if needed.
@shaimaasamir7074
3 жыл бұрын
Thank you so much for your tutorial, I love all your videos, I have a couple of questions if you have time: after printing do you clean the block from residue ink and what are the best method to clean brayers, block if using oil based ink. my studio get really messy :-)
@smishstudio
3 жыл бұрын
Aw thanks 😊 Yeah, I’ll answer these the best I can! There are a couple things you could do to remove ink from your block. You can continue to print the block without rolling new ink onto it, and if you use linoleum you can wash it with a damp rag (maybe a tiny dab of soap). I do both for my lino blocks and I try not to get the back of it wet. Avoid hot water on the block because it can warp. To clean brayers, I just use warm water and soap. I purposefully don’t use oil based inks that require an intense clean up. I use the Caligo Safe Wash Oil relief inks by Cranfield because they clean up super easy with water and a little soap! For the regular oil based inks, you can use vegetable oil to remove ink from brayers and surfaces then clean with soap/water and a tiny bit of degreaser if necessary. Print studios very easy to get messy, it’s almost a requirement to be a printmaker 😅
@shaimaasamir7074
3 жыл бұрын
@@smishstudio Thank you so much for your help! really appreciate it. and keep sharing with us your beautiful art!
@evalopez1094
2 жыл бұрын
Me encanta pero no sé si por favor podría pasar sus videos en español.
@TheM00ndawg
Жыл бұрын
could you use this process to do t shirts? fabric paint instead of ink? great tutorial as well
@smishstudio
11 ай бұрын
Absolutely! Make sure to use block printing ink made for fabrics though. Fabric paint isn't the right consistency to roll onto lino for printing.
@elliotmittens7635
Ай бұрын
What is favorite ink for this?
@kathrynknox4
3 ай бұрын
Can you use thick acrylic paint instead of ink?
@smishstudio
3 ай бұрын
You could try it! You'll still want to build up the ink in thin layers. Paint might not do as well for small details. Let us know if it works!
@urmom6475
2 жыл бұрын
This is a great video! I have question, do you have to use printing paper or can you just regular paper like card stock?
@nargesnazari764
2 жыл бұрын
What type of ink or color do you use?Water based or oil based?
@stefanocelio5433
3 жыл бұрын
Thank you so much but I need advices for clean dry ink on the lino...
@smishstudio
3 жыл бұрын
Hm, you could try oil if it’s oil based ink, or water for water based ink. I try to print 3-4 prints without inking up the block to remove extra ink before putting it away. If you mean ink that dried during printing, then you have to wash and dry your block before continuing. It can be a tedious process. Good luck!
@geoffwilliams6841
2 жыл бұрын
Great tutorials but the constant ‘upspeak’ was unbearable.
@bishsec
3 жыл бұрын
Very well done video and very helpful. You're a great instructor!
@smishstudio
3 жыл бұрын
Thank you! I'm glad it was helpful 😊
@Everydayfashion-q2s
3 жыл бұрын
Amazing Keep sharing plz and keep safe Let's connect.....
@smishstudio
3 жыл бұрын
Thank you!
@wendl15
Жыл бұрын
I think it’s beautiful. Even the ‘saltiness’ doesn’t bother me. Very good tutorial series.
@smishstudio
Жыл бұрын
Thanks! Glad it’s helpful, and I love the print variations too!
@alanmagee81
Жыл бұрын
Thank you for these tutorial videos, loved them, I'm going to try my own printing now!
@lindsaywk3889
3 жыл бұрын
Turned out so good! Great tutorial.
@smishstudio
3 жыл бұрын
Thank you 😊
@Wildevis
Жыл бұрын
3 Great tutorials, very clear and concise and easy to follow. I just need new cutting tools but I like your multi tool. One can also use rice paper to print on? I want to use it to print on fabric, so will try out fabric paints, any reccomendations on how to ink that or is it same as this water-based ink?
@smishstudio
11 ай бұрын
Thank you! I'm glad my tutorials were helpful! You can technically print on anything, and rice paper (aka mulberry paper) is a common printing material. For fabrics, I would recommend using specifically a block printing ink made for fabric printing. The inking process should be the same - just follow the instructions on the ink for drying and heat-setting it. It's good to practice on a few scrap shirts first, and you might possibly need to apply a sliiiiiiightly thicker layer of ink to the block. It's been a while since I've printed on fabric, but that's where I would start if I was doing it. Happy printing!
@Wildevis
11 ай бұрын
Thanks I was thinking normal fabric paint is too "soft" to get that ink on lino right. Will see what fabric block print inl I can get @@smishstudio
Пікірлер: 130