Mad props for keeping your integrity and favoring us, your viewers, and not the companies! Keep us posted how it works out!
@cannonball7322
3 жыл бұрын
I bought a tekna pro lite quick clean after watching your video a couple year's ago. I then bought a tekna basecoat gun and had some issues with the spray pattern. Wish I had just bought another pro lite quick clean though. Tried everything and finally adjusted the air pressure lower than recommend and it seems to have fixed the problem but I also got that idea from you gunny! I habe had good luck with devilbiss as far as customer service her in the US. I bought a flg 4 and they package two 1.5 tips instead of the 1.3,1.5 and 1.8. sent me a tip with just a phone call and told me to keep the other tip. Thanks for the videos. Keep them coming!
@raho24781
3 жыл бұрын
Was Thinking about getting a proLight,,,,after I run that Sata X5500 PHaseR,,,your using them proLights for a reason,,,,great reviews your Honesty is soooooo appreciated, for all of us,,,,we talking to a Binks Factory rep about a month ago here in the states, and told me Devilbiss bought out Binks, WoW,,,,soo Sad But Devilbiss is Moving on strong and proud to see you Reping them ,,,. Thank you ~!
@zestyshonavlogs5352
3 жыл бұрын
Great review as always I’m dying to get my Pro Lite in Jamaica 🇯🇲🇯🇲 🇯🇲
@paulhopkins1905
3 жыл бұрын
I wouldn't do the review on the knockoff. Counterfeiters don't deserve the purchase of their stuff
@husky1232
3 жыл бұрын
Always give a good truthful review that's why I like your channel thank you gunman stay safe
@nicholaskoedooder3569
3 жыл бұрын
Had the same problem with my Devilbiss gti pro lite, returned it back and they have send me a new one and again same problem. Also bought a devilbiss dv1 with the B-plus air cap, was spraying very very uneven and bought the hvlp-B and problem was solved sort of. I'm very disappointed in devilbiss as they have alot of defects and you pay top dollar for them so you expect top quality, dont get me wrong its a good spray gun. I've been spraying with my dv1 for 2 years now and its laying my silver metalics perfectly. I've moved to Walcom 360 hte base spray gun, now THAT'S is a good quality spray gun. I'm very happy with my new Walcom spray gun and regret I didn't use them sooner
@bigsquatchsasfoot1964
3 жыл бұрын
That metallic blue ish green was a lovely colour gunny , rest vid man thanks 👍
@dougowens2686
3 жыл бұрын
Nice job I got the pro lite after watching you do work on the corolla so far its a great gun
@Harolddespui
3 жыл бұрын
The amount of changes Devilbiss made from going from the SRI Pro, to the SRI Pro Lite to the Prolite S: Zero. It's almost funny. (well, except for the color and a slightly different aircap). With the DV1S they finally have an all new spotrepair gun but it's extremely expensive. I can't blame people anymore if they await the Chinese knockoff for 1/10th of the price.
@nickjoiner450
3 жыл бұрын
I ended up with that blue pro lite as the Gunman stock had finished, gutted. Why have they changed it and only one colour blue take it or leave it. If your going to do one colour pick a better one, even one that wasn't available on the original gti pro lites. I guess it's to turn people to the DV1. Good video Gunny can't wait for the answer from Devilbiss.
@bobmillerick300
3 жыл бұрын
Great review. Thanks for the share. that blue front end looks awesome. Cheers
@808autobody7
3 жыл бұрын
Ya know I wondered the same thing about the tekna/gpi primer. It's essentially a polite with a bigger nozzle needle setup. GPG looks like they went 15 years back to the PRO. Nice video very informative and looking forward to the dv1 mini review 🤙🤙 Aurite!!
@ot7694
3 жыл бұрын
I use the GPG for base comes out nice. And I use the prolite for clear comes out phenomenal. I was using the gpg for clear but comes out with no orange peel
@b.macnicol8641
3 жыл бұрын
Great review. I personally like the GPG body style better.
@tbirdsteve1
3 жыл бұрын
Seems to me a major step backwards by Devilbiss.
@HaydenK1998
2 жыл бұрын
I saw on SGD that the GPG has replaced the GPi as well but also comes in 1.2 and 1.3 set ups as well the 1.4,6 and 8. I was wondering what they're like as I really like the GPi for base, I always thought the only thing letting it down was not having tips smaller than 1.4. Apart from the black controls and satin body the gun looks identical to the GPi would be interesting to see if the needles and tips would fit.
@stevetainton827
3 жыл бұрын
After doing a good days work ,pull up the floor grating and do a bit of jet skiing
@isaacwyant763
2 жыл бұрын
Great videos Have you ever heard back from Devilbiss on the GPG spraying uneven I was really considering the GPG with the 1.3 1.5 and 1.8 tips but after your videos and comments I'm unsure and I'am a complete rookie and do not want to make a mistake on my First Gun
@markbarton4344
3 жыл бұрын
Thanks for the review man. Hopefully it was just a defective spot repair gun.
@TheGunmanChannel
3 жыл бұрын
It was, I had a gold one years ago and it sprayed fine
@rafaelberrios6859
Жыл бұрын
Excelent videos always mate!!which air cap would you recommend on the prolite for solvent basecoat???
@peterpearce8489
2 жыл бұрын
I’m curious what the outcome with the return on these guns was? Did they ever get back to you about the the uneven spray pattern?
@kimojoseph8057
3 жыл бұрын
Awesome 👏 video gunny those guns are cool 😎 for the money I love devilbiss guns they make good guns hands down and that GPG boy o boy what a fan bigger than the ws400 lol 😂 thanks 🙏 for the review much love and respect ✊ gunny !!🤙🤙🤙🤙🤙🤙👏👏👏👏👏🙏🙏🙏🙏🙏🙏🙏💪💪💪💪💪👊👊👊👊👊👌👌👌👌👌👌👌👌💯💯💯💯💯💯💯💯💯💯😎😎😎😎👍👍👍👍👍👍👍👍👍
@chriswortham3869
3 жыл бұрын
My pro lite s sprays wonderful. I am waiting to spray the dv1s. It is lighter than the pro lite s.
@donproctor4480
3 жыл бұрын
I was disappointed in my tekna pri, sprayed great, atomized well, but it started leaking at the tip after 6 months, & if I didn’t keep it tuned upside down when not In use, I get the nasty splatter.
@RicardoChichas1
2 жыл бұрын
Hello, are the pro lite gone? They dont make ir anymore? Cheer from Portugal
@TheFredfury
2 жыл бұрын
Liked and subscribed. So I got the prolite high efficiant spray gun. I was wanting the tekna prolite. My compressor is big but not the best what would you recommend or what's the difference I should expect from the hvlp to high efficiency?
@LTVoyager
3 жыл бұрын
Hey, Gunnie, have you ever done a video on troubleshooting issues with a spray gun? I have watched a good number of your videos and don’t remember one. I have an SRiPro and a Finishline 4 and the SRi always gets a layer of paint build-up on the horns of the tip. The Finishline tends to be completely clean after a session. Any idea what might cause this? Is it something in my setup? I use the recommended 29 psi inlet pressure and screw the fluid control out until the threads are just visible and typically have the fan wide open or nearly so. I am currently spraying a water-born primer (Stewart Systems Ekoprime) on small airplane parts (SRi) and larger parts such as the wing skins (FInishline). Both spray quite well with no issues with the spray pattern, but the small gun is a paint to clean as the horns typically have a very uniform layer of dried primer on the horns after every spray session. Just curious is this is just a characteristic of this gun, if it is something in my setup or if I possibly have a defective tip. Since the gun sprays a uniform pattern, I suspect it isn’t a defect, but more likely something I am doing in the gun setup. Or maybe it is characteristic of the primer I am using. I have yet to spray color through either gun.
@shaunc4786
3 жыл бұрын
Miss seeing you on stage mate
@SteezeMcQueen
3 жыл бұрын
i keep telling my apprentice to watch the dvd ;)
@francopetrella2131
3 жыл бұрын
i like that water wash floor, what booth is that? If i buy a gun and it's a bit fucked, I get a blank stare in return. The knockoff guns are very average.
@bartnuyts
3 жыл бұрын
Good review and nice to see you being honest about the small defects on twoo off your favorite brand's new guns!absolutely love your video's,i've learned so much from just watching your channel.any chance you will be doing a review off the Finixa spg series sprayguns?they carry a full size gun and mini gun with lvlp caps designed for the hobbyist at home and semi-professional work.they interest me because off the friendly price(about 200$)but i would love to see you take them to their full potential first.greetings from Belgium
@solomonquinn1041
Жыл бұрын
Have you heard anything about a primer dv1 you mentioned. I'm looking to get a 1.8 gti pro lite but if there a dv1 in 1.8 id much rather have that.
@Ford_Falcon
2 жыл бұрын
Im interested to know is it the gun it self or just cap that changed thats causing the build up if just cap might get second hand old better caps might be worth trying old cap on new gun see if no build up
@austincrawford5477
3 жыл бұрын
Think I could spray some base and clear with the GPG? looks like they have different air caps for that. What cap would you recommend?
@MJs-85
Жыл бұрын
to be used with a pressure pot which conventional spray gun should I use if I need 60 to 65 psi atomization or gun pressure? Thanks!
@jeffdeluca1153
Жыл бұрын
Hey Gunny great vid. What ever came of the ProliteS quality issue? Bad gun or general quality issue? Thx again
@TheGunmanChannel
Жыл бұрын
They confirmed at SGD they weren't great but didn't chase it further, that was during the height of COVID so it didn't seem like a priority to them
@AdamOutlaw87
2 жыл бұрын
Love to try one of these but im stuck in the past in love with my battle tested devilbiss plus. It may be old school but i can get the result i want 100% of the time so why switch whats the point
@rileymacmullin4944
Жыл бұрын
What is that liquid that you have underneath the grating I see there my man?
@gtogus712
Жыл бұрын
Your opinion is That blue prolite a good clear coat gun ?
@martin-jj9pe
3 жыл бұрын
Just tried to buy a GTI pro lite and i was told they don't make it now it's been replaced my the pro lite
@eviljoker303
2 жыл бұрын
Do the new Prolites come with multiple air caps and different size spray nozzles like the US Teknas did?Im wondering if the DV1 would be a much better choice for the price over the new Prolite
@TheGunmanChannel
2 жыл бұрын
Bang for buck pro lite still win for me. But I don't think they come with multiple tips or caps
@cassin11
Жыл бұрын
Hey Gunny, did devilbiss get back to you about the air cap issue with the prolite-s? Planning to get one
@TheGunmanChannel
Жыл бұрын
I wouldn't get one, I bet it's not the only one with a funny spray pattern. The DV1 S is a bit more expensive but mate, it's the best mini gun I've used. If price is too high, look at theANi R150
@cassin11
Жыл бұрын
@@TheGunmanChannel I'm looking for a mini gun, capable to handle high build primer so I thought prolite-s 1.4 was a good idea because I have small compressor. I'm looking for the biggest fluid tip with smallest cfm consumption. As always, thank you for you all do. Appreciate it very much.
@psarb1386
3 жыл бұрын
hi is this water under the spray booth
@luizcarlosoliveirabarreto1949
3 жыл бұрын
Good job.
@paulsmith4442
3 жыл бұрын
Seems pretty obvious that devilbiss have cut costs by cutting quality and by only supplying one tip and one air cap!
@dennishaydensr.6306
Жыл бұрын
where can I purchase the fluid needles and other stuff I may need for the devilbiss prolite G10
@TheGunmanChannel
Жыл бұрын
Email Chris at info@spraygunsdirect.co.uk If they don't have it nobody will. Tell them I sent you. They'll look after you
@nenadstanojevic1427
3 жыл бұрын
What was the Electronic Hand held Paint Guage, you were using on your Corolla.?
@TheGunmanChannel
3 жыл бұрын
It measures paint thickness. It's called a micrometre
@philmunsel303
2 жыл бұрын
I'm looking for a recommendation for a decent all round gun. I'm a DIY who likes to paint my own cars/parts and want an idea what gun & cap to get for spraying base & clear (solvent) > i'm swaying towards this one - The Devilbiss GTI PRO LITE with the TE20?
@TheGunmanChannel
2 жыл бұрын
I would recommend the Pro Lite T110 1.3 because that cap needs less air, it's less likely to cause any issues with air fluctuations of your compressor. It basically uses a lower air volume. If you wanted to get a slightly cheaper gun but still great, get the GPG (formerly GPi) it's listed and labelled on spraygunsdirect.co.uk
@philmunsel303
2 жыл бұрын
@@TheGunmanChannel Awesome, thanks!
@Litlehouseproduction
3 жыл бұрын
What settings on your prolite
@keevasmybitch
3 жыл бұрын
My new FLG-5 1.8 which turned up in the newly designed box which I got from spraygunsdirect about 2 months ago, does the same thing as the GPG gun, paint is building up on the right hand side of the air cap. I think the quality control has disappeared from DeVilbiss.
@jeffeaton5221
3 жыл бұрын
Is there a difference in tekna prolite clear coat than a GTI prolite? The tekna is a US and GTI is UK besides that the tekna clear gun comes with a TE25 cap. I know tips and caps can be interchangeable but heard tekna clear has -3 part baffle , 2 part baffle on none clear model.
@808autobody7
3 жыл бұрын
They're both the same internally minus the air flow adjustment valve/cheater valve on the tekna. For some reason we get stuck with the watered down version of euro guns😅🤙
@jeffeaton5221
3 жыл бұрын
@@808autobody7 That's what I was thinking but someone said they had difference part number baffles.
@808autobody7
3 жыл бұрын
Just triple checked. Same baffle, seal, and plate. Identical except for needle nozzle sizes.✌
@epicasmasher5504
Жыл бұрын
Nice gun
@Rboling4199
3 жыл бұрын
Gunny i finally bought a pro lite, te20 for sealer base and clear? What’s the te10 good for? Also what’s the pps 2.0 adapter number for the pro lite? Thanks mate
@TheGunmanChannel
3 жыл бұрын
S15 is the PPS2 adaptor and TE10 is a great all-rounder, it'll handle anything you throw at it.
@Rboling4199
3 жыл бұрын
@@TheGunmanChannel ty mate, what’s best settings for it? Pressure?
@TheGunmanChannel
3 жыл бұрын
@@Rboling4199 that depends on what you're spraying. Basecoat 20-25 clear 30~psi
@fredjones1238
3 жыл бұрын
if i got the PRO LITE WHAT ARE THE BEST 2 TIPS TO GET FOR GENERAL ALLROUND WORK
@mitchellferre1652
2 жыл бұрын
1.2, 1.3 and get a cheaper gun for primer with a 1.8.
@wardbros1
2 жыл бұрын
Hay Gunny will the ProLite TE20 air cap fit the GPG?
@TheGunmanChannel
2 жыл бұрын
It fits on but doesn't spray properly
@wardbros1
2 жыл бұрын
@@TheGunmanChannel thanks mate your a champion! Keep up the good work mate. I've watched a few spray painting videos and 90% are hard to watch and in my eyes don't cut it! Your's are very well done and not only that you can tell straight away your a natural spray painter. 😉
@Peaceful1980
2 жыл бұрын
Hi bro! I want to buy devilbiss, but I don't know which head is universal for top coat and base coat TE10(1.3, 1.4) or TE20(1.3, 1.4)? sorry i don't know english
@TheGunmanChannel
2 жыл бұрын
1.3 is best for top coat
@Peaceful1980
2 жыл бұрын
@@TheGunmanChannel hi bro, i bought deVilbiss gti pro lite 1.3 today, it's super after lph400. I would like to paint like you
@skeffelss
3 жыл бұрын
Now it's time for another give away gunny... 😜
@olimpietis124as4
3 жыл бұрын
Gunny need help. TE10 or HV25 for solvent base?
@TheGunmanChannel
3 жыл бұрын
TE10
@suvado
Жыл бұрын
What's your opinion on a Sata RP 3000? Heard they were decent. Fast, flat finish. Thanks buddy
@TheGunmanChannel
Жыл бұрын
Probably the last really good SATAs. Build quality dropped after that era
@steveauston6020
Жыл бұрын
@@TheGunmanChannel I know some in the autobody, restoration that still spray with them to this day. Pounding the clear, amazing finish! Thanks for the feed back. Your videos are awesome!👍
@hurrikan84Y
3 жыл бұрын
👌🏻👌🏻👌🏻👌🏻
@bagusbagus5842
3 жыл бұрын
Gedang goreng
@johnflood6656
3 жыл бұрын
Where are these real devilbiss guns being made? I suspect China as poor machining will cause this
@TheGunmanChannel
3 жыл бұрын
Still in UK
@wmac382
2 жыл бұрын
I've never seen a spray booth with water under the grates. Looks cool but could someone please explain?
@curtispooler6497
3 жыл бұрын
Devilblss is the Gun for me for sure sata is a gun of the past.
@rey1164
3 жыл бұрын
Love the honesty, i own a prolite and shoots phenomenal does alot well, very versatile and hopefully they get you sorted out
@Mechaniclyfe
3 жыл бұрын
Thanks for the info gunny 👍🏻
@swc-diygarage
3 жыл бұрын
I bought a fake ProLite to test and review. The one I got was piece of crap and most of the comments I got where how I was wrong or I didn't have it set up correctly.
@kenknowles8209
2 жыл бұрын
We had a defective TE20 cap with our band new pro lite. One hole was just a little off and after one coat the build up was terrrrrrrible. Swapped caps she’s back to being my favorite but it does seem to be a common thing with those caps
@davidlepore4552
Жыл бұрын
Again, great video...ill keep my eye out on that fan pattern....that said...its not a hard thing to compensate for...for our hard earned money, your correct, it should be spray a proper pattern...
@JohnWD40TC02
3 жыл бұрын
Great review Gunny and I love your honesty, the ProLite range has been available for a while now and for me I won't be buying what is just a rebranded product which is exactly the same as the awesome GTI which I have 2 of them. I think you will like the DV1S it's the same size as the SRI but IMO sprays better and the fan pattern is also better, I think you know that I won my DV1S in a competition and I love it, so much so that a week later I bought the DV1 C1 digital clear gun which is also fantastic but I think my digital gauge is faulty as it reads 1.2bar when a gauge fitted to the base of the gun reads 2bar not sure what you think about that Gunny but there should be a Devilbiss rep coming round to see me and check it out. John UK.
@Vahan210
Жыл бұрын
Great video. I'm looking for lvlp spray gun for doing wood finish and painting, cabinets as well. Any help with this would be appreciated.
@racl1954
3 жыл бұрын
I would think that DeVilbiss and any other manufacturer of equipment will take the trouble to watch you. The bottom line is you are an artist. You care about how you lay lay the paint on whatever you are doing. It is a pleasure watching you work. Give us more of the work that you do and a little less of what you do it with.
@stevetainton827
3 жыл бұрын
Love the waterwash booth,no crappy dusty floors or airlines splashing up from hosed down floors.Lush booth TottAlly mint
@jiujit49
2 жыл бұрын
That's a great test, to turn spraycap sideways,to prove the heavier side,ty
@illstplaya84
3 жыл бұрын
they ditched the CD's?? what??
@daniel64padilla
2 жыл бұрын
I have a pro light, I have always felt it was top heavy but I always thought it was my fault!
@OMGANARAB
3 жыл бұрын
I just wanna say as a new subscriber and viewer I love your 100% honesty!! It's so nice to find honest people like you brother! If you don't mind me asking would you still recommend the devilbiss gpi for a newcomer trying to get into spraying as a job? I was pretty excited seeing this video but now after your review it looks like I'm going back to looking at the gpi haha
@DarkAnthraxx
2 жыл бұрын
What is the difference from these and the teknas?
@AB-jp9jb
Жыл бұрын
Is that te20 cap with 1.2 or 1.3?
@msgtkevinpatnode5649
2 жыл бұрын
I just purchased a new Pro Lite from Eastwood it came with TE10, TE20 caps and 1.2, 1.3, 1.4 nozzles. it also came with a digital air valve. I cant wait to use it. Thanks for all your great videos, they are very helpful.
@Vahan210
Жыл бұрын
Do you know if it comes in lvlp ?
@AJsHotRodsNrepairs
3 жыл бұрын
So I dunno if I got a lucky one years ago but when I bought my prolite it came with 3 fluid tips and 2 air caps. Anyone else have that happen or did I just luck out?
@TheGunmanChannel
3 жыл бұрын
If you're in America then I believe that's pretty common
@AB-jp9jb
2 жыл бұрын
What psi you spray with te20 1.3 cap gun man
@TheGunmanChannel
2 жыл бұрын
29psi for clear, 20-25 for basecoat
@looper451
3 жыл бұрын
Do you have any affiliate links or know of good distributors for painters like myself who live in Canada?
@TheGunmanChannel
3 жыл бұрын
Yeah mate, the links in the description of the video are my sponsors website. They ship really fast to Canada
@looper451
3 жыл бұрын
@@TheGunmanChannel Awesome thank you
@ivantieu6764
3 жыл бұрын
The gunman aka water booth man haha.
@TheGunmanChannel
3 жыл бұрын
😂😂
@radudanielman
3 жыл бұрын
👍👍👍
@LTVoyager
3 жыл бұрын
I suspect they just ran out of their CD stock. 😂
@johnflood6656
3 жыл бұрын
What's CD?
@LTVoyager
3 жыл бұрын
@@johnflood6656 You must be really young. CDs have not been obsolete all that long. They are plastic disks that hold data.
@PnwOnTour
3 жыл бұрын
💥 💿 💥
@johnflood6656
3 жыл бұрын
No he said the gun didn't come with CD...is that how they came? A CD to learn about gun?
@LTVoyager
3 жыл бұрын
@@johnflood6656 His earlier videos discuss this, but that is my recollection.
Пікірлер: 133