Your a savior bro…I ordered a 2020 for my 2021 🙈…and I was very close to returning it until I saw your video and it was of great help….
@burnoutbobby
Жыл бұрын
Glad I could help. This way it still works and you get to use it
@jyotiradityanayak4626
2 жыл бұрын
Make a video on this swingarm mod u have in ur 390 man this is sick ! 😍💯
@burnoutbobby
2 жыл бұрын
Will do. I’ll put it on the channel after I finish this ruckus.
@CHRDML
6 ай бұрын
Thanks sounds like new gen
@jessnegron8174
9 ай бұрын
Iam new and this area have a beautiful and clean bike my question is no have any problems when you run
@burnoutbobby
9 ай бұрын
No problems at all. Has zero issues with this.
@jessnegron8174
8 ай бұрын
I cut the factory and made same this thanks for idea
@burnoutbobby
8 ай бұрын
Awesome!
@michaelthomas8097
2 жыл бұрын
I pic up my new 22 ktm 390 tomorrow an I love a stretched bike
@andyproctor3588
3 жыл бұрын
Yeah that thing even sounds sweet on my phone so I know that thing is real in person love the stretch👍👍
@burnoutbobby
3 жыл бұрын
For sure. I can’t wait to really open it up
@Pengsonc
3 жыл бұрын
Thanks mate, I’ve got the titanium one and will follow your guide to cutting the vband, so it can all fit.
@burnoutbobby
3 жыл бұрын
Awesome
@alexoulton6845
Жыл бұрын
Just order the 2017-20 pipe like this fool forgot to mention.
@michaelthomas8097
2 жыл бұрын
Doing all the upgrades to your bike as far as power it ant cheap $900 for ecu cat delete an air box mod can you tell a difference in hp
@burnoutbobby
2 жыл бұрын
Yeah I can tell a good difference for sure.
@ktmdukenz
Жыл бұрын
Did this require an ECU map? If not that, then fueling adjustment? I am reading mixed messages everywhere that this is bad for it due to the amount of air coming out, versus going in etc.
@burnoutbobby
Жыл бұрын
With just the slip in no fuel management is needed it’s post cat and post o2 sensor. If you do an airbox lid then you will want to do something like the fuelx.
@juliancarter2144
3 жыл бұрын
Need to show me what you did with the stretch. And what were you saying about lowering the front? Did you ditch the WP forks and rear shock 😮
@burnoutbobby
3 жыл бұрын
Kept all the factory suspension just modified it.
@oscardominguez1680
2 жыл бұрын
Any difference to having this and nothing at all? I have a Svartpilen 125 2022, any tips of what to do if i want this look, currently on no exhaust at all and i can't drive like that, need to quiet it down...
@burnoutbobby
2 жыл бұрын
There’s no difference with no muffler and this tip other than it looks better for the the eye
@michaelthomas8097
2 жыл бұрын
One more ? Is there any baffle in the exhaust pipe slip on or is it open pipe
@burnoutbobby
2 жыл бұрын
Open off the post cat
@Hp.Flaco215
Жыл бұрын
How do I lower my duke and stretch it like yours? I would definitely appreciate some links. I haven’t found any videos or any links for parts.
@burnoutbobby
Жыл бұрын
The front you just lower the forks in the triple tree. The rear is the eBay swingarm extension for your year duke. The lowering link for the shock was by T. rex racing. I don’t have links because I got it all local. But I know this is where they were all purchased.
@richardoconnell9165
2 жыл бұрын
What brand of tail tidy is that? Can you add a link please? I ordered this slip on because of your video. Thank you for sharing!
@burnoutbobby
2 жыл бұрын
I have the Kemimoto fender eliminator. The first one I had on there broke. There’s another video for the fender eliminator one. Thank you !
@sompobutama3761
3 жыл бұрын
Thanks!
@BRCBIKER
Жыл бұрын
Does the speed chop while reving from 2000 rpm or is it smooth
@burnoutbobby
Жыл бұрын
Smooth for me
@anthonybosnjak43
2 жыл бұрын
just installed mine after cutting it like yours, 5 minutes into riding my bike shut off while riding and oil light came on for the first time? Curious if you know the cause of this
@burnoutbobby
2 жыл бұрын
That I don’t know. I’ve never heard that from a slip on. When was the last oil change
@anthonybosnjak43
2 жыл бұрын
@@burnoutbobby Brand new bike has 800km on it only , forgot to mention low fuel popped up then bike shut off simultaneously. realized that’s most likely the reason. Just coincidence I just installed slip on I guess.
@burnoutbobby
2 жыл бұрын
That’s sounds like it may be the case.
@owedee3988
Жыл бұрын
Titanium or stainless is there any difference in sound???
@burnoutbobby
Жыл бұрын
Stainless. With it being so short it won’t matter the material.
@MKBENTOT
5 ай бұрын
Mines a 2023 and the exhaust is too small and doesn’t fit over the flange like yours. Did they send me the wrong one?
@burnoutbobby
5 ай бұрын
I believe so. The 2023 should have the correct flange on it.
@MKBENTOT
5 ай бұрын
@@burnoutbobby they emailed me. Partly my fault , I didn’t remove the gasket they was stuck on. I still had to widen the outlet to fit over cat a bit , but didn’t have to do relief cuts like yourself. Thanks for the reply!
@burnoutbobby
5 ай бұрын
Glad it was a quick fix.
@stupidmilkshake4887
2 жыл бұрын
how loud would you say it is compared to the stock slip on?
@burnoutbobby
2 жыл бұрын
Not super loud. Go to my ktm duke walk around video and there’s sound clips
@sudipmondal4513
3 жыл бұрын
please share exhaust link
@michaelthomas8097
2 жыл бұрын
Can you send me the link or what ever it is how you bought it
@burnoutbobby
2 жыл бұрын
I got it from a shop called dream cycles in Florida. He doesn’t have a website but has a Facebook site.
@michaelthomas8097
2 жыл бұрын
How much does it cost to stretch that bike
@burnoutbobby
2 жыл бұрын
250$
@sompobutama3761
3 жыл бұрын
Nice video thanks for sharing what handlebar did you change to. 🙏
@burnoutbobby
3 жыл бұрын
Went with the fasst bars
@inokstinger9041
2 жыл бұрын
Can u please let us see the bike u r blocking thr view 😂
@michaelthomas8097
2 жыл бұрын
Post a pic of your bike
@burnoutbobby
2 жыл бұрын
It’s on my Instagram.
@rivercityrambler7751
Жыл бұрын
People doing swingarm extensions on these bikes is so humorous. It does absolutely nothing positive for ridability and in all honestly diminishes cornering capability.
@burnoutbobby
Жыл бұрын
If I hurt your feelings please let me know. I will ship you some Kleenex sweetie.
@rivercityrambler7751
Жыл бұрын
@@burnoutbobby not at all. Just 40yrs+ of being on 2 wheels and owning everything from liter bikes a busa and a H2(2017) to the 390 you see in my avatar. Many track days over that time frame as well(circuit and 1320.) The 390 doesn't provide enough torque to benefit from an extension and actually does more harm to the ridability of the bike than good. Anyone with experience riding will tell you this.
@burnoutbobby
Жыл бұрын
I have zero issues turning in tight radius and ave same capabilities as the r6 and other bikes I ride with. Don’t see the issue. Maybe I should have left it stock and did an. Yoshi slip on. Then I’d get the purist approval.
@rivercityrambler7751
Жыл бұрын
@@burnoutbobby it is impossible that you have not diminished the cornering abilities of the bike as you increased the wheelbase. You just don't ride at that limit where you realize how you have actually impacted the bike in this manner. ....and I'm not a Yoshi fan. Or Akra for that matter. At least not for these bikes. I only run LeoVince cans. I run a carbon fiber LV Pro with the dB killer pulled. About to do a Comp Werkes presilencer delete. I've dropped over 50lbs from the bike so far and counting by yanking unnecessary stock items from the bike. These bikes are known for handling. All I am simply saying is that you are basically diminishing the one thing they are noted for by doing a swingarm extension and it really serves zero benefit in ridability. Shorter wheelbase is better for cornering ability as opposed to longer which is beneficial when cruising highways or long straights for stability at speed. These bikes are too light and lack the power to necessitate this mod from anything other than an aesthetic perspective.
@burnoutbobby
Жыл бұрын
It’s not impossible as it’s not stretched that far. Been to tail of the dragon twice with it. Not sure what you are looking for here but I don’t need your approval. You can go to a purist page and troll there.
@Mattmazz77
3 жыл бұрын
Yeah, I definitely think that the company or any individual that has any common sense could have figured this out without you....lol.
@burnoutbobby
3 жыл бұрын
Thanks for your input but the bikes have been out for 6 months and they told me they have not been able to get ahold of one to test and trial it on. Lol...
@Mattmazz77
3 жыл бұрын
@@burnoutbobby lol.
@burnoutbobby
3 жыл бұрын
Hey I get questions on how to put on foot pegs in my channel. Anything can have a video
Пікірлер: 65