I have to admit that I honestly didn’t expect this to work. I’d tried other methods and none worked, so finally I figured I might as well give this a shot…and I’ll be damned if it didn’t do the trick. THANK YOU SO MUCH!!!!! I really appreciate your posting this.
@mrguppy1016
2 жыл бұрын
I AGED TWENTY YEARS BY LISTENING THIS DUDE OMG 😜 🤣🤣🤣🤣
@stumplifter
2 ай бұрын
Better than the other guys that over explain. Less word good.
@hjjackson05
2 ай бұрын
But it's worth it
@Healing_to_elevate
9 ай бұрын
This video is awesome 👏🏾 thank you thank you !!! It worked the first try . I’m so glad I found this video this was a blessing
@xoringe
3 ай бұрын
Thanks! Cable was fine but latch arm was sticky. This plus WD40 did the trick!
@willybilly8187
Жыл бұрын
Thanks Keeney garage you helped the most, I was able to unlacht my hood.
@MarySchultzRN_BSN
2 жыл бұрын
Yours was the third video I watched and the only solution that worked! I will have to lubricate the mechanism and see if that keeps the cable working. Thank you!!
@kylemcguire537
9 ай бұрын
Thanks for the tip it worked great!! For everyone out there make sure to spray some silicon spray all over the latch mechanism and it worked by pulling the cable next time I went to try it.
@rayfordbrannon4118
Ай бұрын
Thanks brother. Worked like a charm
@dj_ridam5477
2 жыл бұрын
Bro. It worked! You saved me.. 10* you're a credit to KZitem tutorials.. much love from London UK 🇬🇧
@richardoswald2541
2 жыл бұрын
This very simple trick worked FANTASTIC. I just slipped a 3/16 sheet metal plate where you used the plastic bar then pushed down on it to raise the hood.Went back in the Tacoma truck and pulled on the release cable and the hood popped up. Shot some silicon lubricant into the latch area. Now it works like new. Thank you for the great tip this fix is super easy and takes about 2 min.
@lonkaufmann4179
3 ай бұрын
You're a wizard! Thanks, this worked for me. With a plastic spoon wedged under the hood, the release went 'twang' when I pulled it back and the hood was up an extra 2'' !
@geoffh3431
10 ай бұрын
Didn't think this was going to help much with my VW Golf bonnet which was not releasing at all as it seemed to simple compared to plenty of other video's i had watched, but it worked like a charm for me, as others have said, so many many thanks for taking the time to do this.
@tunafish3216
8 ай бұрын
Now you need to show us how to adjust the cable on the latch handle.
@anthonyarter3791
4 ай бұрын
HOLY SHNIKES! This worked first try!!!!!!!!!! A Billion likes if i could
@melrobinson6919
5 ай бұрын
Hot damn! I was watching videos of guys taking wheels and fender liners off to get to cable junctions and replacing the latches and cable sets and came across this video. So I said: Why not try it, I have the exact same plastic tool you used. Bingo, as soon as i inserted the tool, up pops the hood on my 2020 QX60 since the hood release was already pulled in the cabin.. So I lubed up the latch and cable end while the hood was up. Many, many thanks for this video. 😂
@sunshineannie2602
11 ай бұрын
OMG 🎉🎉THANKS SO MUCH IT DEFINITELY WORKED AT ONCE❤❤❤YOU ARE 👏
@MonolithicMonotone
Жыл бұрын
Thanks so much for uploading this, you saved me from looking like an absolute clown
@Age_Of_The_God
2 жыл бұрын
Mines is jammed the hood is Cracked on my chevy cruze 2012
@tedkord5545
Жыл бұрын
That worked on the first try. You're the best. Thank you so much.
@marktlumacki7963
Жыл бұрын
Absolute genius idea, you are the man worked first time!, I used a ice scraper the the tapered scraper fit in perfectly, can’t thank you enough saved a lot of aggravation…..
@stumplifter
2 ай бұрын
Like others said - thank YOU. Other videos are long winded, over explaining, telling me to remove, blah, blah, blah. Instead of Just Show Me! This was the ticket. Thank YOU
@dennismorin7506
7 ай бұрын
I ran into the same problem with my Toyota Tacoma it was -35c pulled the interior hood release nothing happened. Not sure if Ice was a problem but I beat the front of my hood with my fists and tried again….. still nothing. I tried pulling the interior hood release again and it is just like the one in the video. This time I reached under and pulled the cable attached to the hood release while using the hood release did the trick
@nellygarcia5935
Жыл бұрын
Bueller... Bueller...
@darrelldoesken2919
3 күн бұрын
Thanks, this worked amazingly!
@RobertoAguilar-me3qm
10 ай бұрын
Don’t jank the plastic lift get pliers n pull the cable with pliers till open take ur time when open spray wd 40 on latch bottom part
@mst3kpimp
15 сағат бұрын
ive done the cable technique with no luck, i did something similar to this guy by wedging in a paint stirring stick, after opening you need to regrease latches so it wont happen again.
@unkwnrook
11 ай бұрын
Out of everything this worked. If I could like this video a million times I would
@eugenecbell
2 ай бұрын
What pushes the hood up? I think my latch is ok, but my hood just sits there.
@thekeeneygarage
2 ай бұрын
Generally, there is a spring in the latch assembly or mounted to the hood.
@eugenecbell
2 ай бұрын
@@thekeeneygarage thank you. For a 2005 Gird Escape, perhaps just two rubber plugs? What are these called? I can’t search for rubber hood thingies.
@thekeeneygarage
2 ай бұрын
@eugenecbell a hood bumper?
@eugenecbell
2 ай бұрын
@@thekeeneygarage thank you I will try that. Then I will take a picture in the my local parts store.
@HAL09000
Жыл бұрын
It's worth the wait. I guess any plastic tool that you can jam under there will do. I used a small pair of pruners with a plastic grip. Opened up a 1997 Ford Escort hood. 😀
@israelverstappen3173
5 ай бұрын
No entendí 😢
@thekeeneygarage
5 ай бұрын
Wedge something in the hood first, then pull the release second
@paulacabbo466
Жыл бұрын
Or you duct tape the release lever in the open position I used a bungee on release lever once, the one you pull straight back
@melrobinson6919
5 ай бұрын
This brings back memories... Back in the early 70's I had a typical for the era, POS '68 station wagon and the hood latch apparently became worn and so one time I thought I had closed it, but soon found out I hadn't. Well, on the freeway, the hood opened and lifted up and slammed back against the windshield. I didn't realize how fast I could open the hand crank window so I could see ahead with my head sticking out of said window.... Cars of the era had no secondary hood latch. Little wonder the Japanese cars quickly earned a reputation for superior quality.
@Evilmusician4_2
Жыл бұрын
Thanks so much worked like a charm ! I used a couple wooden wedges I had in the shop same result and it took like five seconds ! you saved me alot of hassle cheers! keep up the great content !
@banjocatbird4360
2 жыл бұрын
Thanks so much! I didn't have a plastic trim tool but an old plastic ruler from school worked great.
@michaeltodd2012
2 жыл бұрын
Thanks, this worked for me. Used a rubber spatula as a wedge to get the hood open then lubricated the mechanism and all is well.
@dauryarias2913
2 жыл бұрын
Bro 😎 you are the man. 🙏🙏🙏🙏🙏🙏 just saved me 2hrs
@galactic904
7 ай бұрын
Tu es un vraie genie, mech. Merci
@tokyolink9693
2 жыл бұрын
Dude I just opened it in a second after saw your video great stuffs keep it up
@BradRocker
Жыл бұрын
Worked perfect. You're a God send.
@hrules5757
2 жыл бұрын
thanks, lifesaver
@brianmancell7605
2 жыл бұрын
It worked, thanks brother
@MrVegasTube
2 жыл бұрын
What if the latch lock lifts pops open the hood, but the second latch dosent budge to fully open the hood? Thats what my 2017 camry is going through now.
@thekeeneygarage
2 жыл бұрын
Possibly look for mounting hardware to remove or try a spray lubricant. Remote evaluations are nigh impossible for me to be of great assistance with.
@yolandagadsden5971
8 ай бұрын
I’m having this issue now with my Ford Fusion. Did you ever figure it out?
@MrVegasTube
8 ай бұрын
@@yolandagadsden5971Yeah I used a spray called PB Blaster, its a catalyst/Lubricant and fully sprayed the latch mechanism. Let that set a while and then sprayed it with silicone and it worked. Now I also used the silicone spray on the hood hinges, which I recommend you do too. What I discovered was... you know how when you lift up the inside hood latch and it supposed to pop up slightly enough to get fingers in to release the hood and open entirely? Well I discovered from a dealership mechanic that the condition of the hood hinges will allow or prevent the "pop up" action to occur. So after you get to open up the hood spray liberally the hinges and keep them able to allow the hood to pop up. And also spray everything once evey fall at least so you never have this problem again.
@cebo918
2 жыл бұрын
😴
@ibfubar
8 ай бұрын
I have a Subaru Forrester. Your video was a big help. I used a wooden wedge. The kind you use when installing a door.
@waynelesly1445
Жыл бұрын
Have u ever done audi it has 2 latched i think
@thekeeneygarage
Жыл бұрын
Not yet
@gerometorribio2127
2 жыл бұрын
Simple and to the point. Thanks, I’ll try this.
@peterrudy9207
11 ай бұрын
What causes this ?
@thekeeneygarage
11 ай бұрын
Dirt and debris will typically accumulate in the latch assembly, gum it up, and cause it to stick.
Пікірлер: 60