A bug in firmware V15.17 on the JK Inverter BMS can cause your battery to be Force Charged if the 'wrong' CAN protocol us set. I say 'wrong' protocol, but there is a Deye CAN protocol, however if you use this for communication to a @sunsynk (Deye) Inverter, this 'Force Charge' will happen.
If the 001: Deye Low Voltage Hybrid Inverter CAN Protocol is selected in the BMS, this will enable the Request Force Charge function on the Inverter, and your battery will be charged from the grid (if no solar power is available) and won't be allowed to discharge under normal conditions. If grid failure occurs, battery power will be used as normal.
It seems like for everything to function as normal, the 002: PYLON-Low-voltage-V1.2 CAN protocol needs to be selected.
Make sure you do all of your own testing when making changes as not all functions have been checked / tested using Firmware 15.17.
I am using Hardware Version 15 of the JK Inverter BMS.
Firmware Version 15.11 did not have this 'Force Charge' problem, but it seemed to have an issue when multiple batteries (BMS's) are used in parallel, the SOC would not be aggregated and reported to the Inverter correctly.
⭐️⭐️⭐️ OTHER VIDEOS ⭐️⭐️⭐️
🧰 Testing Limits • Testing limits of JK I...
🧰 Hot to connect JK BMS to SunSynk Inverter • Connect JK BMS to SunS...
🧰 How to Upgrade firmware on JK BMS • How to Update Firmware...
🧰 How to downgrade firmware on JK BMS • How to Downgrade firmw...
🧰 Review of the JK Inverter BMS • New JK Inverter BMS Re...
🧰 Review of the original JK BMS • New JK BMS and SCREEN ...
🧰 JK Screens compared • JK BMS Screen Comparis...
If you want to read other reviews or buy one of the other style JK BMS's, here is an option 👉 amzn.to/3yy7lAH (make sure to select the correct model that you need)
My Other Socials 😁 👉 linktr.ee/gran...
================================================
💰💰💰 Support for the Channel 💰💰💰
================================================
If you wish to support the channel, please consider using any of the methods below (Any support will be VERY much appreciated):
⭐️ Use Super Thanks on KZitem, next to the like button
⭐️ Patreon - / grantburton
⭐️ Pay Pal - paypal.me/gran...
================================================
✅✅✅ 2024 GEAR ✅✅✅
📷 Camera - Sony A6400 amzn.to/2ErIC5s
🔭 Lens - Sony 18 - 105mm f/4 G OSS amzn.to/3hWwqri
🔭 Lens: Sigma 16mm f/1.4 amzn.to/2ZZeS7J
🔭 Lens: Sigma 30mm f/1.4 amzn.to/2HJcWd7
🎙 Mic: RODE NTG5 amzn.to/361R4nx
🎙 Microphone - RODE Wireless GO II amzn.to/2YZ9PX0
🎙 Microphone - RODE Video Mic Pro+ amzn.to/3jsk7o7
🎧 Audio Recorder: Zoom F6 amzn.to/2HeVGwb
💻 MacBook Pro 16 inch amzn.to/2GlCMTU
🎧 Headphones: BeyerDynamic DT770 Pro (80 Ohm) amzn.to/33kurc9
Soundtracks from Epidemic Sound (Referral link below)
www.epidemicso...
Please help support the channel by purchasing through my Amazon Affiliate links above. When you do, I earn a small commission which helps keep the channel going and you don't pay anything extra.
@OffGridGarageAustralia Andy's channel on KZitem also has a lot of good information about these JK BMS units.
#bms #BurtonBuilds #offgrid
Burton Builds
S07E09
Негізгі бет Тәжірибелік нұсқаулар және стиль Problems with JK Inverter BMS and SunSynk (Deye) Inverter | Request Force Charge
Пікірлер: 75