he said 58 you said 58 but pressed 56 lol then blamed him hehe love it great vid
@miamiautomobile5566
2 жыл бұрын
it was a mistake by me pressing 56
@omerward9261
5 ай бұрын
hi Man amazing video did you have to renew the ECU with I'm608 or you just plug and play
@miamiautomobile5566
5 ай бұрын
I renew it using im608
@jorgemat8080
2 жыл бұрын
Good information, thanks. I have a question here. Added a key to a 2007 SL550 with the push to start on shifter knob and everything works except the proximity. I tried different proximity keys and nothing. I was told that there might have to be another step but no one know. Do you happen to know what that extra step is to get the key to work with proximity. Thank you. I'm using the autelim608pro and a proximity keyless factory key.
@miamiautomobile5566
2 жыл бұрын
You need mb star to activate the keyless go
@carlosdegracia4335
2 жыл бұрын
Hi! In Autel IM608 do you can write and activate in IMMO section of the tool as you did to virginize? or have always to go to diagnostic in order to do DAS and SCN coding? Thanks for your feedback
@miamiautomobile5566
2 жыл бұрын
You can write and also change Vin and activate at the same time without doing scn coding
@obasichukwuemeka4804
10 ай бұрын
Thanks for this lesson but are u saying dat u can get any 272 ECU for R350 and merge it with C300 other
@miamiautomobile5566
10 ай бұрын
You can only program it on 211 and R 350 Ml350
@megaman4201
2 жыл бұрын
Just subscribed, amazing tutorial but why not turn your phone around so we can see the full screen, please!
@miamiautomobile5566
2 жыл бұрын
Noted, thanks bro
@Chizzy_Man
2 жыл бұрын
ok great video, but u need mercedes star to do gear teach in for the ISM otherwise the car will start bt no drive... thanks for the video
@miamiautomobile5566
2 жыл бұрын
You can also use im608 to teach in ism and vgs but relearning engine ECU get nothing to do with ism
@nestorsuva6700
3 ай бұрын
Thank you,is this similar to KIA RIo 2013, I'll be using im608... I am a mechanic and trying new staff...
@miamiautomobile5566
3 ай бұрын
Not the same step with kia Rio, you have to copy and write using pin point or eeprom
@nestorsuva6700
3 ай бұрын
@@miamiautomobile5566 thank you,mate
@AsadGamer
Жыл бұрын
Hello i got a question Did it went well or you had abs esp issues? Which numbers you made sure are the same from the both ECUs.. And that they have same software?
@miamiautomobile5566
Жыл бұрын
it went well, no any ABS or ESP issues, it went well bro
@meca-nico
2 жыл бұрын
buen video , como puedo ubicarte en Miami.
@miamiautomobile5566
2 жыл бұрын
Sorry can you write in English let me understand what you meant
@chadkelley167
2 жыл бұрын
I see you did this one obd. I have w209 with me9.7 and autel wants to do the ecu on bench. Have you done this one? I am replacing this dme because the old one is no communication. Do you have any tips? Or do you know if it can be done? I hear drive authorization is a problem and scn coding. I can’t back up coding because dme is no communication
@miamiautomobile5566
2 жыл бұрын
You can get ECU without doing scn coding, just do learning process and you are good to go
@jamescc2010
Жыл бұрын
I don’t know what the cost of a new ECU but is it better to get a brand new one? I guess it depends on situations. Even a new ECU we still have to renew it?
@miamiautomobile5566
Жыл бұрын
You didn't have to renew an new ECU
@mtyler7807
2 жыл бұрын
Would this work the same for the im508. Because my customer changed the ECU in there c240 but traded the original ECU in as core.
@miamiautomobile5566
2 жыл бұрын
No, im508 has do not have the function
@mtyler7807
2 жыл бұрын
@@miamiautomobile5566 well I'll buy the im608 in the middle summer. Can't get rid of my im508 because of the built in vci. It's a lot less to carry. Unless they let me upgrade.
@porustedesparaustedes5662
Ай бұрын
Hi great video quick question I got a 2010 ml350. I desconnect the negative like 6 hours and when I connected back car won’t start don’t do nothing radio screen shows nothing what’s you think it is and how much cost to fix
@miamiautomobile5566
Ай бұрын
Was there light on the dash when turned on ignition if there is no light replaced the car battery
@porustedesparaustedes5662
Ай бұрын
@@miamiautomobile5566 the battery is practically new I bought it like a month ago
@miamiautomobile5566
Ай бұрын
Check the fuses first if none is blown scann the car and send me the trouble code
@porustedesparaustedes5662
Ай бұрын
@@miamiautomobile5566 code. It gave me those code but when I put. The key on it and turned 2 time the lights on the dash don’t show up don’t turn on U010087 -u010187 . 918E - 918f. - 9190 - 9191 - 9194 , 9196, 9197. - D640. C42300 C10087. U010100.
@290Noname
25 күн бұрын
Did you verginise the ECU first? Thanks
@miamiautomobile5566
25 күн бұрын
Yes i do
@Twicewatch
Жыл бұрын
Was that a used ECU ? If yes was it virginized before the teach in process was carried out?
@miamiautomobile5566
Жыл бұрын
Yes it was an old ECU, i virgin it before teach in
@emekaonyedire5053
2 жыл бұрын
Will tge transmission work also?
@miamiautomobile5566
2 жыл бұрын
Yes the tge will work also
@oussamajenhani4963
3 жыл бұрын
Gj
@antonioloza5759
2 жыл бұрын
Hi, you dont need to virginize this ecu?, only with this steps can do it? I have c280 2008 same ecu me 9.7
@miamiautomobile5566
2 жыл бұрын
Only if the ECU is not personalize on any car then you can relearn it in another car, but if the ECU is personalize in any car, it's has to be renew before you can relearn again.
@hmgamer3308
2 жыл бұрын
@@miamiautomobile5566 how can we renew the ecu please i try to brogram used ecu and I filled withe autel the car is c280 me9.7
@huseg
Жыл бұрын
I have a 2011 ML350 4matic bluetec, 3.0 diesel, i`m getting some problems with the ECU, if you are located in Miami area any way that i can contact you to check this issue?
@miamiautomobile5566
Жыл бұрын
Not in Miami but trying to move down to united state
@emekaonyedire5053
2 жыл бұрын
Can thinktool pros do same ?
@miamiautomobile5566
2 жыл бұрын
I don't really know about thinktool
@12masterr
3 ай бұрын
Hello .sorry, but I didn't get the first part. Don't you have to read the info from the old ecm first and store it ,to transfer it to the new one?
@miamiautomobile5566
3 ай бұрын
When ECU is unlocked you can go with this procedure
@12masterr
3 ай бұрын
@miamiautomobile5566 so you need a " virgin ecu"? If I buy one of ebay it will not work? Thanks for answering!
@yasoutherncousin
2 жыл бұрын
What vehicle did u get ecu from?
@miamiautomobile5566
2 жыл бұрын
R class 350
@sadhinhossin6403
2 жыл бұрын
I need a know programming car mercedes of the leptop..
@miamiautomobile5566
2 жыл бұрын
You mean you want to know if programming can be done a laptop, yes
@Man-Up-G
Жыл бұрын
Hi, I have a 2004 E55 AMG and I need to clone my original ECU on to a used ECU. Do you know how to do this procedure with the Autel? If so, let me know, I will pay you for the instructions. Thanks brother
@miamiautomobile5566
Жыл бұрын
You can swap the eeprom ic
@MuhammadBilal-qh3dc
2 жыл бұрын
Are the ecu is maked virgin before do this procedure or no ?
@miamiautomobile5566
2 жыл бұрын
Yes the ECU was virgin before carrying out the procedure
@MuhammadBilal-qh3dc
2 жыл бұрын
Thanks for your reply and thear is no other way to program like ktaq ?
@ayberkors8577
Жыл бұрын
hi, i live in miami and i have a similar problem. When I bought the vehicle, there was no engine ecu and cluster on it. I bought the ignition and electronic control unit of another car from the internet. I installed it but it didn't work. If you virginize the ecu, will the problem be solved? I have a dxtool d7 pro device, can I introduce the new ecu with it?
@miamiautomobile5566
Жыл бұрын
I don't know if dxtool can do that, but im608 and cgdi can do the job, but if the ECU is already virginized your system can merge it to the car
@njogumendy8871
3 жыл бұрын
Hi brother I order the im608 which country are you at?
@miamiautomobile5566
2 жыл бұрын
Sorry for replying too late, from Nigeria
@jamesdaniel6843
2 жыл бұрын
@@miamiautomobile5566 hi can one carry out this same service on a 2001 c240
@miamiautomobile5566
2 жыл бұрын
@@jamesdaniel6843 yes you can, when you renew the eeprom in the ECU
@miamiautomobile5566
2 жыл бұрын
And you were are you from
@georgeanddaddecker7563
Жыл бұрын
What scanner is this?
@miamiautomobile5566
Жыл бұрын
Autel im608
@clementanyanwu7247
Жыл бұрын
Can I do it with my launch
@miamiautomobile5566
Жыл бұрын
Yes you can, depends on the kind of launch you are using
@douggregory2922
2 жыл бұрын
Can IM508 with XP400 pro do this?
@kyledavey8681
2 жыл бұрын
Yes, I believe 508 has same capabilities *IF* you by the xp400. The xp200 that comes with the 508 only does basic key programming. Aside from screen size, and a few other little bs incidentals, the only thing separating the 508 and 608 is that the 608 comes with xp400. Also don't be fooled by the "new xp400 pro" it is essentially the same as the original XP 400 except that it can't do RFID tags / cards.
@miamiautomobile5566
2 жыл бұрын
Yes im508 can do the same for you if you have all the accessories
@butbut948
Жыл бұрын
is it no need scn coding ?
@miamiautomobile5566
Жыл бұрын
No need, but on some ECU you can do scn coding
@Dillonj177
2 жыл бұрын
I need a Mercedes ecu programmed in Orlando and can’t find anyone
@miamiautomobile5566
2 жыл бұрын
Sorry about that bro, i don't know anyone in Orlando, i will av connect you, but if you av a system with team viewers i could av assist
@Bullitt12273
2 жыл бұрын
I love this video girls says 5 8 then he proceeds to enter 5 6 and blames the girl. Hahahahahahaha
@rabeesaleh1457
Жыл бұрын
This is will not allowed from mercedes benz you have to virgin yr ecu then do yr settings
@nazircrm
8 ай бұрын
Hi Try today with w221 2007 with me9.7 ecu use im508 no success.
@miamiautomobile5566
7 ай бұрын
What are you trying to do with im508 , do you want to reprogram or renew the ECU
@letsgobrandon6545
6 ай бұрын
This is applicable ONLY if ECU is new or virginized(reset) used donor ECU. If you get used donor you have to clear it first. As far as I'm concerned there's only way to do this on a bench, maybe thre's other otpions but im not aware
@julitomartinez3835
Жыл бұрын
Hello I'm trying to replace the ecm but I don't have the old one
@miamiautomobile5566
Жыл бұрын
Which model
@julitomartinez3835
Жыл бұрын
@@miamiautomobile5566 SLC 550
@miamiautomobile5566
Жыл бұрын
Specify the year model of the benz
@julitomartinez3835
Жыл бұрын
@@miamiautomobile5566 2007 CLS 550
@georgeanddaddecker7563
Жыл бұрын
You typed vin in wrong. 8 was the last digit you pressed 6.
@miamiautomobile5566
Жыл бұрын
Mistake but corrected
@partoems9376
Жыл бұрын
Hi, thanks for the video. I have this error on a 2016 Mercedes-Benz C-Class C300 4MATIC Sedan when The car's TCU was replaced with a used module. Error: the start enable signal was not issued by control unit -' Drive authorization system'. Will teach-in drive authorization and writing the VIN to the tcu solve the problem?
@miamiautomobile5566
Жыл бұрын
You need to do scn coding on the vgs4 , online programming will soft the issue, you need original MB star to do the programming and coding
@miamiautomobile5566
Жыл бұрын
2016 should be fbs4
@RoadHeros610
2 жыл бұрын
I'm super dead FIVE EIGHT MUTHA FUCCAH! 🧐
@sadhinhossin6403
2 жыл бұрын
Teacher i need a more any think. Please you teach me teacher. Thank you?
@sadhinhossin6403
2 жыл бұрын
I need a know programming car mercedes of the leptop..
@miamiautomobile5566
2 жыл бұрын
You can program with Mercedes Benz laptop which is the best
@adnanhajdarpasic1591
Жыл бұрын
Hello I have Mercedes c class w203, my ecu was fried by water. My question is can I put new ecu with different numbers. My old ecu numbers are 646 153 89 79, can I put this ecu 646 153 76 79? Pls if you can replay me I would be so gratefull.
@miamiautomobile5566
Жыл бұрын
Yes it will work, 89 79 and 76 79 will work for each other
@adnanhajdarpasic1591
Жыл бұрын
@@miamiautomobile5566 Thank you brother for your reply ❤️
@balendrakumar620
2 жыл бұрын
Hi
@miamiautomobile5566
2 жыл бұрын
Hallo
@klapbackproduction2428
7 ай бұрын
U put a 6 instead of 8
@miamiautomobile5566
6 ай бұрын
Mistake my brother but later corrected
@nigelnkunzi6414
3 ай бұрын
Your vid is very poor man can't see the whole screen it the diagnostic machine
@otukanonsobright2767
Жыл бұрын
Good day,pls if u dont mind can u share diagnostic/programming tool plug?im in need of that IM608pro,where can i buy it here in nigeria?if u also dont mind i will need your phone number to contact u on somethings too,thanks
Пікірлер: 125