Get exclusive video tutorials by joining our Patreon today! www.patreon.com/Shoutbam
@Ellagami2020
8 ай бұрын
I don’t know what I didn’t wrong, but when I tried the smudge part, it either only pulled have of the peppermint or just did nothing but make in blurry. This was a great tutorial though and the parts I did get I really liked.
@shoutbam
8 ай бұрын
Make sure the size of the blend brush is a little bit smaller than the peppermint and sample it right at the center. Try with a bigger pepperming and you’ll see! And go smaller when you get used to it. It’s a tricky option and hope procreate improves it at some point! Thanks for stopping by 😊😊😊
@jocylynkirsty4877
8 ай бұрын
That fixed this issue for me as well! Thank you! I didn’t think I was cut out to make my own brushes, thank you for teaching me a new skill!
@baerklinn
9 ай бұрын
I am mad, spent so many time but, you have to show us every single fu**ng thing. Fu++ chrismas brush men where is that?
@shoutbam
9 ай бұрын
Thanks, appreciate the feedback but can you be more specific and explain it in detail?
@elizabethgray2386
9 ай бұрын
I couldn’t get it to work. The smudge wouldn’t carry color everywhere. I guess I will try again.
@KimJay246
9 ай бұрын
I’m also sitting here since two hours and reading up in google… my smudge keeps getting transparent depending on the direction I smudge it. So frustrating 😢
@shoutbam
9 ай бұрын
Just make sure that the smudge brush size matches the peppermint you're sampling. Begin with a larger size, starting from the center (essential!!) If you encounter any issues, share a video on Instagram @jimbobernaus 😊😊.
@DavidPaulArtsNDesigns
9 ай бұрын
Followed 4 times 5 hours and repeat, but just get a washed out smudge or the thing just rolls around, I see others are having the same issue. Looks so cool too, mmm
@shoutbam
9 ай бұрын
Make sure the size of your smudge brush is the same big as the peppermint you are sampling! Make a big one to start with and remember to start right in the middle. If it doesn’t work please send me a video on instagram @jimbobernaus 😊😊
@baerklinn
9 ай бұрын
Its bullshit, not worked amk
@riripurpletini
9 ай бұрын
Yes changing the brush size worked for me
@shukuli5339
9 ай бұрын
JIMBO I LOVE THIIIIIS
@shoutbam
9 ай бұрын
Yaaaaaaay
@giuliettam5561
8 ай бұрын
Hi, I tried to set The blend brush as seen in your tutorial but it doesn’t give me the desired effect, unfortunately I get a light gradient. I would like to know where the error could be. Thanks you
@shoutbam
8 ай бұрын
Hi Giulietta! Could you send me an image or video on instagram? You can find me at @jimbobernaus . It's probably because the size of the blend brush and the peppermint are different. Make sure sizes are the same!
@ulrikejacqueroud18
9 ай бұрын
Jimbo, THANK YOU SOOOO SOOO MUCH for helping me. Just to let the community know, I didn't manage that my brush works correctly in all directions. My mistake was that I didn't start EXACTLY in the middle of the peppermints we placed on the canvas. It's a bit tricky to get it, but since I started exactly in the middle, it works perfectly! Perhaps this can help other who are struggling like me? Jimbo is a great teacher, once again, thanks to you! 🤩🤩🤩
@shoutbam
9 ай бұрын
Thank you SO much for your comment! I’m so happy I could help you! For sure your comment will help others. You’re the best, thanks thanks thanks! And have an excellent start of the year 😊
@ColorCurebyDesign
8 ай бұрын
I have been wanting to learn how to make this, and your tutorial was amazing, easy to follow, and by trial and error and redoing I got the hang of it. Thank you! thank you!
@shoutbam
8 ай бұрын
I’m so glad you found it useful! Thanks to you for taking the time!!!
@dawncave2470
9 ай бұрын
Hi Jimbo, I love this but my pencil after following your instructions is not pulling the candy piece. I must be getting it wrong somehow but not sure what is stopping it working.
@shoutbam
9 ай бұрын
Make sure you use the Smudge tool!!! If you keep having issues please send me a little video on instagram and I'll help you out! My handle is @jimbobernaus :)
@snowflakebluebell7585
8 ай бұрын
I can’t get it to work either
@dawncave2470
8 ай бұрын
@@snowflakebluebell7585 I did work it out eventually. Make sure your curser is not too big but the same size of your art work. Hope this helps x
@snowflakebluebell7585
8 ай бұрын
@@dawncave2470 I finally managed to figure it out after watching another similar tutorial. Thank you x
@yvonnetucker1416
9 ай бұрын
do you need a tablet to go this in?
@shoutbam
9 ай бұрын
nowadays you can do it with pretty much any available software! The process is obviously different though!
@lookingforangels782
9 ай бұрын
I didn’t get the dog?
@shoutbam
9 ай бұрын
My dog was barking in the background! That’s why I showed her 😅
@susans2991
9 ай бұрын
Pure genius! Merry Christmas to you, Tea, the cute dog and my favorite finger piggy.
@shoutbam
9 ай бұрын
Thank you Susan!!! Sending you a hug from both of us and of course another one from your favorite Piggy! :D
@daniellesmith6719
9 ай бұрын
I'm having issues getting the freebie for this. I've signed up but I'm not getting the welcoming email which I assume will be a temporary password as the one I make is getting an incorrect message.
@shoutbam
9 ай бұрын
Hey Danielle! Could you send me an email at info@shoutbam.com and i'll send you the password there? Sometimes the mail with the password goes to Spam but few times it doesn't get sent! thanks for the patience!!!
@meowmads
9 ай бұрын
These videos are so underrated. I have to come back to each one and level up my design skills. Do you offer courses?
@shoutbam
9 ай бұрын
Hi there! Thank you so much😊 really means the world😊 I have a Patreon with a bunch of long-format tutorials here: www.patreon.com/Shoutbam Then I have a Domestka course here: www.domestika.org/en/courses/2645-custom-letter-design-with-procreate/jimbobernaus And a composition mini-course here: www.designcuts.com/product/procreate-lettering-composition-for-beginners/?ref=shoutbam And next year I’ll release a couple longer courses!! Thanks again for the interest and the kind words!
@sara-gallery
9 ай бұрын
Wow thank you very much 😍😍😍 I did not know in procreate too can do it i just saw it in Adobe fresco big thank you 🤗🤗😘🌸
@shoutbam
9 ай бұрын
I was so happy when they got us this update!! Thanks for stopping by 😊😊😊
@finnhaddie817
9 ай бұрын
Thank you for this fun lesson, Jimbo! You’ve inspired me to invest more time in my lettering. Thank you too for your generous(!) gift of Christmas brushes; I appreciate that you do everything you can think of to help us achieve. Blessings on your head 🙌
@shoutbam
9 ай бұрын
You’re making me so happy right now. My main mission is to help people get motivated and learn new things and reading comments like yours makes me feel SO accomplished😊❤️
@RebeckaHathaway
9 ай бұрын
You're a magician! This is a really fun technique. Thanks!
@shoutbam
9 ай бұрын
Sooo glad you like it! Would love to see what you create!!!😍
@FilomenaJackStudio
9 ай бұрын
Thank you for this! Wonderful tutorial!!
@shoutbam
9 ай бұрын
So happy you like it Filomena!!!!
@lisajane1111
9 ай бұрын
Incredible. Thank you 🤩
@shoutbam
9 ай бұрын
Anytime Jim!!!!
@158skylady
9 ай бұрын
Thanks for the tutorial!
@shoutbam
9 ай бұрын
Thanks for stopping by!!!😊❤️
@maried378
9 ай бұрын
Love the video! Wait. Is that Pickle Rick??
@shoutbam
9 ай бұрын
Thanks😊 Yeah!!! He’s always there when i work! And he’s a talking pickle rick btw 😂😍
@maried378
9 ай бұрын
@@shoutbam OMG 😍
@vellamsmith
9 ай бұрын
Awesome video as usual!
@shoutbam
9 ай бұрын
THANK YOU!!!!😊❤️
@KnightBott
9 ай бұрын
Absolutely gorgeous! 😍🎄
@shoutbam
9 ай бұрын
THANK YOU!!!!
@HigoGabarron
9 ай бұрын
It's fantastic!!!!!! 🎉
@shoutbam
9 ай бұрын
Thank you Higo!!!!!
@allisonbell1320
5 ай бұрын
thanks so much! this is amazing 😊
@yvonnetucker1416
9 ай бұрын
thank you
@shoutbam
9 ай бұрын
anytime!
@Kevdog1920
9 ай бұрын
That's awesome effect
@shoutbam
9 ай бұрын
Thanks!
@Kevdog1920
9 ай бұрын
@@shoutbam I never know how to turn off symmetryy. Whenever I turn it on, I have trouble getting it off. But I'll try your video to see
@shoutbam
9 ай бұрын
@@Kevdog1920 we got you! You have to tap on the layer and turn it off! Turning it off through adjustments isn’t enough if it’s been previously activated on a specific layer ☺️☺️
Пікірлер: 66